编织结构复合材料损伤胶接修理试验分析

Experimental Analysis on the Adhesively Bonding Repaired Technology of Braided Composite

摘要: 对复合材料损伤构件进行胶接修理,在MTS试验机上进行强度试验,并在5个位置安装应变片,记录修理构件能够承受的最大载荷以及加载过程中的应变变化。分析结果表明:胶接补片改变了原来的应变分布,增加了试验件的强度,试验件的破坏从应变较大处开始。最佳的修补参数为复合材料修理补片与母板纤维方向成0/90°,补片大小为损伤面积的2～3倍,补片厚度为损伤深度的0.6～1倍。
- 复合材料 /
- 胶接修理 /
- 补片尺寸
Abstract: Strength of adhesive bonding repair composite material laminated with different path parameters were tested on MTS material test machine.Strains during the test were recorded using five strain foils bonded on different positions of the laminate.The result indicates that: 1) the patch changes the strain distribution and increases the strength of the laminates;2) the optimized repairing efficiency can be obtained when the ply-up angle of the patch is 0 or 90°,the size of the patch is 2～3 times of the damaged size and the thickness of the patch is 0.6～1 time of the damage deepness.
- braided composite /
- adhesive bonding repair /
- patch size

[1]	陈绍杰. 复合材料结构修理指南[M].北京:航空工业出版社,2001
[2]	Jones J S,Graves S R. Repair Technique for Celion/LARC-160 Graphite/Polyimide Composite Structures [R].NASA-CR-3794:6-7,June,1984
[3]	童谷生,孙良新,刘英卫. 飞机结构损伤的复合材料胶接修补技术研究进展[J].航空材料工艺,2002,(5):21-29
[4]	孟凡颢,陈绍杰,董善艳,童小燕. 复合材料损伤结构胶接补强修补分析及设计[J].飞机设计,2002,3(1):18-21
[5]	姚磊江,童小燕,董善艳. 损伤复合材料层板胶接修理强度分析[J].机械科学与技术,2005,3(6):676-678
[6]	吕胜利,姚磊江,童小燕. 复合材料修补结构疲劳寿命分析方法研究[J].机械科学与技术,2009,25(9):1018-1020
[7]	李绍春,熊峻江. 复合材料胶接修补件力学性能的试验研究与数值模拟[J].材料工程,2011,(6):11-16.