基于单片下位机的EPS快速成形系统

基金项目:

陕西省工业攻关计划项目(2006)资助

EPS Rapid Prototyping System Based on Single Chip Microcomputer Inferior Machine

1.
School of Mechanical and Electrical Engineering,China University of Mining and Technology,Xuzhou 221116

摘要: 针对当前聚苯乙烯泡沫塑料(EPS)材料加工的市场需要和成形设备的现状,研制了基于单片下位机的EPS快速成形系统。确定了系统的总体设计方案,对主要组成模块,包括机械部分、电气控制部分和上位机软件部分的结构和功能进行了介绍。完成了电气系统的底层开发,实现了步进电机驱动和电热丝温度控制。最后测试了软件系统的功能并进行运行测试,证明该系统易于使用,加工精度可以满足工程需要。
- 聚苯乙烯泡沫塑料(EPS) /
- 快速成形系统 /
- 单片机 /
- 电路设计
Abstract: In view of the needs of EPS material processing market and forming equipments status at present,an EPS rapid prototyping system based on single chip microcomputer inferior machine was developed.The system's overall design scheme was determined,the structure and function of whose main modules,including mechanical part,electrical part and PC software,were introduced.Underlying development of electrical system was completed to achieve stepper motor drivers and electric wire temperature control.Finally,software functions were tested and a real foam part was cut using the system.It proved that the system is easy to use and dimension tolerance is small which can satisfy the engineering requirement.
- EPS /
- rapid prototyping system /
- single chip microcomputer /
- circuit design

[1]	Bedal B. Sterelithography and other RP&M Technologies[M].Dearborn:Society of Manufacturing Engineers,1996
[2]	Jouaneh M. Flexible automated foam cutting system[J].Interna-tional Journal of Machine Tools & Manufacture,1997,37(4):437-449
[3]	Lee S H. Calculation and verificalion of rotation angieof a four-axishotwire cutter for transfer-type variablelamination manufacturingusing expandable polystyrenefoam[J].The International Jour-nal of Advanced Manufacturing Technology,2003,22(3/4):175-183
[4]	刘克福,李晓虹. 基于机电液数字控制的轧机H下装置设计[J].机械科学与技术,2009,28(8):1040-1042
[5]	雍杨,陈晓鸽. AltiumDesigner Summed电路设计标准教程[M].北京:科学出版社,2011
[6]	孙家广. 计算机图形学[M].北京:淸华大学出版社,1995
[7]	王丽. 基于PC机与单片机AT89C52的串行通信协议设计[J].数控技术研究,2006,35(2):19-21
[8]	郝晶,杨瑞峰. 步进电机细分驱动软件设计[J].机械工程与自动化,2009,12(6):140-144.