瓷砖刮平机刮削深度建模与实验研究

基金项目:

高等学校博士学科点专项科研基金项目(20050214001)资助

Modeling and Experimental Study on the Cutting Depth of the Calibrating Machine of Ceramics Tile

1.
College of Mechanical Power Engineering,Harbin University of Science and Technology,Harbin 150080

摘要: 为了研究瓷砖刮平机刮削效果,分析了刮平机的系统结构和工作原理,并建立了刮削深度模型。分析了影响刮削深度的因素,对所建模型进行了实验验证。理论分析和实验研究结果表明:大直径滚筒、瓷砖低速进给、较大的滚刀切削深度三者配合能有效地提高瓷砖的刮削效率。
- 刮平机 /
- 滚筒 /
- 刮削 /
- 瓷砖
Abstract: In order to investigate the cutting effect of ceramic tile calibrating machine,the structure and workingprinciple of the calibrating machine were analyzed,meanwhile the mathematical model for the cutting depth of ce-ramic tile was established. The influence factors of cutting depth were analyzed,the effectiveness of the model wasverified by experiments. According to the results of theoretical and experimental results,it is concluded that thecombination of big diameter cylinder,low feed rate of ceramic tile and deeper cutting depth can enhance the cuttingefficiency of ceramic tile.
- calibrating machine /
- cylinder /
- cutting /
- ceramic tile

[1]	Campos L F A，et al.Experimental design to maximize the wastecontent in ceramic bricks and tiles[J].Cermica，2007, (53):373～380
[2]	El-Fadaly E, et al.Recycling of ceramic industry wastes in floor tilesrecipes[J].Journal of American Science, 2010, (10):241～247
[3]	Atiqur Rahaman G M, Md Mobarak Hossain.Automatic defect de-tection and classification technique from image: a special caseusing ceramic tiles[J].International Journal of Computer Sci-ence and Information Security, 2009, (1):22～30
[4]	Tomislav KESER，eljko HOCENSKI1，Verica HOCENSKI.In-telligent machine vision system for automated quality control in ce-ramic tiles industry[J].Strojarstvo, 2010, 52(2):105～114
[5]	Sidjanin L，et al.Measurement of vickers hardness on ceramic floortiles[J].Journal of the European Ceramic Society, 2007, 27
[6]	Costa C E，Petrou M.Automatic registration of ceramic tiles forthe purpose of fault detection[J].Machine Vision and Applica-tions, 2000, (11):225～230
[7]	徐芝纶.弹性力学简明教程[M].北京:人民教育出版社, 1983
[8]	陈玉凡.矿山机械[M].北京:冶金工业出版社, 1981
[9]	李世忠.钻探工艺学[M].北京:地质出版社, 1992