The Numerical Simulation and Testing in the Spread Process of Rudder
-
摘要: 采用流固耦合数值计算方法和动网格技术,对一种水下航行体舵板在张开过程中的速度、载荷以及动态响应变化规律开展了研究,对影响舵板张开的尾部高温燃气、水下航行体运动速度等因素进行了分析。在此基础上,根据速度等效原则设计了验证试验方案,试验中获取了舵板张开过程的位移-时间曲线、应力-时间曲线以及舵板张开时间与出水速度的关系。仿真计算结果与试验结果对比表明:该计算结果可为水下航行体的水弹道分析、舵板结构设计和材料选择提供依据。Abstract: The variation rules of the velocity,load and dynamic response in the spread process of rudder for an un-derwater vehicle were studied by using computational fluid dynamics method and dynamic mesh techniques, and thefactors affecting the spread of rudder such as high temperature combustible gas in the tail of rudder and underwatervehicle motion speed were also analyzed. The proof testing schemes were designed based on the speed equivalentprinciple and the displacement-time curves and stress-time curves and the relation between the rudder spread timeand the exiting water speed in the spread process of rudder were obtained in the tests. It was concluded that the cal-culation results can provide dependence for the analysis on trajectories of underwater vehicle and rudder structuredesign and material option.
-
Key words:
- rudder /
- numerical simulation /
- computational fluid dynamics /
- velocity /
- dynamic response /
- trajectories
-
[1] 罗金玲,何海波. 潜射导弹的空化特性研究[J]. 战术导弹技术,2004,(3):14~17 [2] 冯振兴. 潜地导弹水下发射环境分析[J]. 导弹与航天运载技术,1996,(5):43~52 [3] 张潇,王延荣,张小伟,裴伟. 基于多层动网格技术的流固耦合方法研究[J]. 船舶工程,2009,31(1):64~66 [4] 杨亮,苏玉民. 粘性流场中摆动尾鳍的水动力性能分析[J]. 哈尔滨工程大学学报,2007,28(10):1073~1078 [5] 雷红霞,权龙. 液压锥阀内部流场的三维仿真计算及可视化分析[J]. 机械科学与技术,2006,25(4):426~429 [6] 张优云,陈花玲,张小栋,张西宁. 现代机械测试技术[M]. 北京:科学出版社,2005
点击查看大图
计量
- 文章访问数: 159
- HTML全文浏览量: 22
- PDF下载量: 5
- 被引次数: 0