基于MMR的三角网格曲面五轴加工刀轨生成算法

陈晓兵; 廖文和; 戴宁; 吴海兵; 陈前亮

基于MMR的三角网格曲面五轴加工刀轨生成算法

1.
南京航空航天大学机电学院,南京 210016;
2.
淮阴工学院计算机工程学院,淮安 223003;
3.
淮阴工学院数字化制造技术重点实验室,淮安 223003

基金项目:

国家科技支撑计划项目(2009BAI81B02)资助

详细信息

作者简介:
陈晓兵(1971－),副教授,博士研究生,研究方向为CAD/CAM与计算机图形学,hychen_xb@sohu．com;廖文和(联系人),教授,博士,cnwho@nuaa．edu．cn

陈晓兵(1971－),副教授,博士研究生,研究方向为CAD/CAM与计算机图形学,hychen_xb@sohu．com;廖文和(联系人),教授,博士,cnwho@nuaa．edu．cn

计量
- 文章访问数: 309
- HTML全文浏览量: 22
- PDF下载量: 4
- 被引次数: 0
出版历程
- 收稿日期: 2012-03-26
- 刊出日期: 2015-06-10

5-axis Tool Path Generation Algorithm for Triangular Mesh Surface Machining Based on Maximal Material Removal Rate

1.
College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016;
2.
Faculty of Computer Engineering,Huaiyin Institute of Technology,Huaian 223003;
3.
Key Laboratory of Digital Manufacturing Technology,Huaiyin Institute of Technology,Huaian 223003

摘要

摘要: 为了提高三角网格曲面五轴加工的加工效率,提出了基于最大材料去除率(maximal materialremoval rate,MMR)的平底刀五轴加工刀轨生成算法。首先计算无曲率干涉且具有最大材料去除率的网格曲面五轴加工的刀具方位角;然后在确定网格曲面可能干涉区域的基础上,提出刀触点处干涉性假设,并以最大材料去除率、刀具无曲率干涉和全局干涉为约束条件,采用二分法确定具有最大材料去除率的无干涉刀具方位角;最后采用截面线法生成三角网格曲面MMR平底刀五轴加工刀轨。通过实验验证了采用文中算法生成的刀轨进行加工能够获得较高的加工效率和表面质量。
- 三角网格曲面 /
- 最大材料去除率 /
- 无干涉 /
- 刀具方位角 /
- 五轴加工刀轨
Abstract: In order to enhance the efficiency of triangular mesh surface machining,we propose the 5-axis tool path generation algorithm based on maximal material removal rate (MMR). The cutter orientation angles of mesh surface without curvature interference are calculated. After determining the possible interference region of the mesh sur-face,we propose the cutter contact points' interference hypothesis,and the cutter orientation angles with MMR but without interference are determined with the dichotomy method under the constraints of MMR but without curvature and global interference. Finally,the MMR tool paths of a flat-end cutter for triangular mesh surface machining are generated with the section line method. The experimental results indicate that the 5-axis tool path generation algo-rithm can achieve higher machining efficiency and surface quality.
- machining /
- algorithms /
- calculations /
- efficiency /
- experiments

HTML全文

参考文献(12)

[1]	周济, 周艳红. 数控加工技术[M]. 北京:国防工业出版社, 2002:101 ~111
[2]	Sun Y W, Guo D M, Jia Z Y, et al. Iso-parametric tool path gen-eration from triangular meshes for free-form surface machining[J]. International Journal of Advanced Manufacturing Technolo-gy, 2006, 28(7):721 ~726
[3]	Jung J Y. NC tool path generation for 5-axis machining of free formed surfaces[J]. Journal of Intelligent Manufacturing, 2005, 16(7):115 ~127
[4]	Lee Y S. Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining[J]. Computer-Aided Design, 1998, 30(7):559 ~570
[5]	Lo C C. Efficient cutter-path planning for five-axis surface machi-ning with a flat-end cutter[J]. Computer-Aided Design, 1999, 31(7):557 ~566
[6]	Choi B K,Park J W,Jun C S. Cutter-location data optimization in 5-axis surface machining[J]. Computer-Aided Design, 1993, 25(6):377 ~386
[7]	Cho H D,Jun Y T,Yang M Y. Five-axis CNC milling for effec-tive machining of sculptured surfaces[J]. International journal of production Research, 1993, 31(11):2559 ~2573
[8]	叶佩青, 陈涛, 汪劲松. 复杂曲面五坐标数控加工刀具轨迹的规划算法[J]. 机械科学与技术, 2004, 23(8):883 ~886
[9]	Kiswanto G,Lauwers B,Kruth J P. Gouging elimination through tool lifting in tool path generation for five-axis milling based on faceted models[J]. International Journal of Advanced Manu-facturing Technology, 2007, 32(7):293 ~ 309
[10]	Rao A, Sarma R. On local gouging in five-axis sculptured surface machining using flat-end tools[J]. Computer-Aided Design, 2000, 32(7):409 ~420
[11]	刘胜兰, 周儒荣, 聂军洪等. 主曲率均匀的网格光顺[J]. 计算机学报, 2004, 27(1):79 ~84
[12]	Li S X,Jerard R B. 5-axis machining of sculptured surfaces with a flat-end cutter[J]. Computer-Aided Design,1994, 26(3): 165 ~178