Research on Simulation Data Extraction of Mechanical Products
-
摘要: 实现多源仿真数据的协同可视化是产品设计师洞察所设计产品性能的有效途径,针对目前对仿真数据的查看都是基于与商用软件的交互操作来实现的,提出了应用于异构机械产品性能分析仿真软件的数据提取方案。通过研究仿真软件的数据提取方法、固有的数据格式及二进制文件的解析方法,定义了一种可以兼容各种仿真分析数据的统一数据格式,重点研究了统一数据模型的建立及框架结构的设计,论述了数据提取的流程,最后通过Ansys和Abaqus结果文件的数据提取对框架结构进行了验证,实现了在脱离商业仿真软件环境下实时查看仿真数据。Abstract: Realizing the multi-source simulation data collaborative visualization is the effective way for designers gai-ning an insight into product performance and the current view of the simulation data is mainly based on interaction with the commercial software, the simulation data extraction solution in simulation software for heterogeneous mechan-ical product performance analysis is presented in this paper. Through studying data extraction methods, data inherent format and the binary file, the unified data format being compatible various simulation analysis data was defined. The unified data model and the framework structure were studied. The process of data extraction was discussed. Finally the framework structure was verified by taking ansys and Abaqus results file of data extraction as an example, realized view the simulation data in real-time disengaged from the commercial simulation software environment.
-
Key words:
- computer simulation /
- design /
- flowcharting
-
[1] 王海伟. 机械系统协同仿真环境中流程建模及控制技术研究[D]. 西安:西北工业大学, 2009 [2] 刘振宇, 傅云, 谭建荣. 基于异构网格耦合的产品多物理场有 限元数据集成与可视化仿真[J]. 机械工程学报, 2010, 46(7): 114 ~121 [3] 陈逸明, 鲍劲松, 金烨等. 工程分析数据沉浸可视化的关键技 术研究和应用[J]. 系统仿真学报, 2004, 16(10):2309 ~2312 [4] 陈伟. 船舶统一数据接口及其面片模型轻量化研究[D]. 上 海:上海交通大学, 2009 [5] 王海伟, 刘更, 杨小辉等. 机械系统协同仿真环境中的统一仿 真模型研究[J]. 机械科学与技术, 2008, 27(11):1291 ~1295 [6] Programmer's Manual for Mechanical APDL. ANSYS. Inc. 2011 [7] 刘云华, 刘俊, 陈立平. 产品三维数据模型轻量化表示实现[J]. 计算机辅助设计与图形学学报, 2006, 18(4):602 ~607 -
点击查看大图
计量
- 文章访问数: 134
- HTML全文浏览量: 28
- PDF下载量: 2
- 被引次数: 0
下载:
