Simulating Operation of R ing Parts Assembly System with NI Virtual Prototyping Technology
-
摘要: 利用包含SoftMotion运动控制模块的LabVIEW软件和具有机械建模功能的SolidWorks软件建立了环片叠装系统的虚拟样机。在完成系统设计之后,搭建硬件设备之前,在Labview环境中利用SoftMotion模块编写系统控制程序,对所设计的系统进行性能仿真,并提出了基于布尔控件"属性-值"节点的程序执行方法,实现了对重复动作任务的运行仿真。本文以环片叠装系统为例进行了基于NI虚拟样机技术的研究,实现了对环片叠装虚拟样机系统的仿真控制,并把优化后的虚拟样机转化为物理样机。运用机械设计与控制仿真相结合的技术,加快了由虚拟样机到物理样机的转化,缩短了设计周期,降低了设计风险。
-
关键词:
- 微装配 /
- 虚拟样机技术 /
- LabVIEW /
- SoftMotion /
- Solidworks /
- 布尔控制
Abstract: This paper uses the SoftMotion and SolidWorks to build the virtual prototyping of a ring parts assembly system. After designing the parts assembly system with the Solidworks software, the control program was written and integrated into the LabVIEW, and the program execution method named the Boolean control of"attribute-value" node was proposed. The program execution method can accomplish repetitive tasks serially within one simulation. Taking the ring parts assembly as an example, the paper studies the NI virtual prototyping technology and achieves the control of the ring parts assembly system. The real parts assembly system was set up by combining mechanical design and control simulation, thus accelerating the development of the optimized physical prototype, shortening the design cycle of the parts assembly system and reducing design risks.-
Key words:
- risks /
- algorithms /
- computer simulation /
- computer software /
- control /
- design
-
[1] 陈国良,黄心汉,周祖德.微装配机器人系统[J]. 机械工程学 报,2009,45 (2):288~293 [2] Bruzzone L,Bozzini G.A flexible joins microassembly robot with metamorphic gripper[J]. Assembly Automation,2010,30 (3):240~247 [3] Kadir A A,Xu X.Virtual machine tools and virtual machining-A technological review[J]. R obotics and Computer-integrated Manufacturing,2011,27(3):494~508 [4] 谢斌斌,赵淑军,李萍奎.基于虚拟样机的动力减振镗杆设计 研究[J].机械科学与技术,2010,29(10):1408~1411 [5] 熊光楞,李伯虎,柴旭东.虚拟样机技术[J]. 系统仿真学报,2001,13 (1):114~117 [6] Li Z X,Yan X P,Yuan C Q.Virtual prototype and experimental research on gear multi-fault diagnosis using wavelet-autoregressive model and principal component analysis method[J].Mechanical Systems and Signal Processing,2011,25(7):2589~2607 [7] 李伯虎,柴旭东,熊光楞.复杂产品虚拟样机工程的研究与初 步实践[J].系统仿真学报,2002,14(3):336~341 [8] 魏娟,贾广利,马宏伟.煤矿救援机器人虚拟样机仿真分析 [J]. 机 械科学与技术,2008,27(11):1369~1371 [9] Hafner M,Finken T,MFelden.Automated virtual prototyping of permanent magnet synchronous machines for HEVs[J]. Trans-action on Magnetics,2011,47(5):1018~1021 [10] 潘伟,邢继峰,彭利坤.基于虚拟样机技术的调距桨仿真研究 [J]. 船舶工程,2011,33(3):38~40 [11] 任广通,赵江波,王军政.基于虚拟样机的电动六自由度并联 机器人结构参数设计[J]. 北京科技大学学报,2012,34(1): 65~70 [12] 孔祥纯,熊彭俊,聂松林.基于 ADAMS 和 ANSYS 的围带滚 柱-偏心圆弧式超离合器动力学仿真[J]. 机械科学与技术,2012,31 (2):317~322 [13] Zhu L D,Zhu C X,Yang J Y.R esearch on motion simulation for robot based on virtual reality[A].IEEE International Confer-ence on R obotics and Biomimetics[C],2007,12:1296~1300 [14] Figueiredo M,Fermand T.An efficient parallel collision detec-tion algorithm for virtual prototype environments[A].Tenth In-ternational Conference on Parallel and Distributed Systems [C],2004,7:249~256 [15] Coman M,Stan Sergiu-Dan,Manic M.Design,simulation and control in virtual reality of a R V-2AJ robot[A]. IEEE 35th An-nual Conference on Industrial Electronics[C],2009,11: 2026~2031 [16] (美)DS SolidWorks 公司著,陈超祥,叶修梓译.SolidWorks 高 级零件教程[M]. 北京:机械工业出版社,2011 [17] 陈锡辉,张银鸿.LabVIEW 8. 20 程序设计从入门到精通[M]. 北京:清华大学出版社,2007
点击查看大图
计量
- 文章访问数: 136
- HTML全文浏览量: 18
- PDF下载量: 3
- 被引次数: 0