隐式极限状态方程结构的混合可靠性分析

郑严; 程文明; 程跃

隐式极限状态方程结构的混合可靠性分析

郑严^1,2,
程文明²,
程跃³

1.
西南石油大学机电工程学院, 成都 610500;
2.
西南交通大学机械工程研究所, 成都 610031;
3.
成都学院工业制造学院, 成都 610106

基金项目:

国家自然科学基金项目(51175442)资助

详细信息

作者简介:
郑严(1981-)，讲师，博士，研究方向为机械结构可靠性分析与优化设计，zychengdu@126.com;程文明(联系人)，教授，博士，wmcheng@swjtu.edu.cn

郑严(1981-)，讲师，博士，研究方向为机械结构可靠性分析与优化设计，zychengdu@126.com;程文明(联系人)，教授，博士，wmcheng@swjtu.edu.cn

计量
- 文章访问数: 103
- HTML全文浏览量: 14
- PDF下载量: 4
- 被引次数: 0
出版历程
- 收稿日期: 2012-07-17
- 刊出日期: 2015-06-10

The Structural Hybrid Reliability Analysis of Implicit Limit State Equation

1.
School of Mechatronic Engineering, Southwest Petroleum University, Chengdu 610500;
2.
Research Institute of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031;
3.
School of Industrial Manufacturing, Chengdu College, Chengdu 610106

摘要

摘要: 针对隐式极限状态方程结构的混合可靠性分析,引入支持向量机回归理论,获得高精度的近似极限状态方程,结合概率-非概率混合可靠性模型和改进一次二阶矩法,提出了一种基于支持向量机回归的结构混合可靠性分析方法。最后通过对悬臂梁和平面桁架结构的混合可靠性分析验证了该方法的可行性和正确性。算例结果表明:当结构中同时含有概率参数和非概率参数时,该方法的计算结果最接近蒙特卡洛法的结果,计算精度高。
- 隐式极限状态方程 /
- 支持向量机回归 /
- 概率参数 /
- 非概率参数 /
- 混合可靠性分析
Abstract: For the structural hybrid reliability analysis of implicit limit state equation,the support vector regression theory is introduced,and a high accuracy approximate limit state equation is obtained in this paper.Combined with probabilistic and non-probabilistic hybrid reliability model and the advanced first-order second moment method,a new method for structural hybrid reliability analysis is presented on the basis of support vector regression.Finally,the feasibility and validity of the method are verified though hybrid reliability analysis of a cantilever beam and a plane truss structure.The examples show that the results of the new method agree well with those by the Monte Carlo method,when the structures include both probabilistic and non-probabilistic parameters.This method has a higher computational precision and also has certain practical value for engineering problems.
- calculations /
- computer simulation /
- computer software /
- flowcharting /
- MATLAB

HTML全文

参考文献(16)

[1]	Ben-Haim Y，Elishakoff I. Convex Models of Uncertainty inApplied Mechanics[M]. Amsterdam: Elsevier Science Pub-lishers，1990，32～54
[2]	Elishakoff I. Essay on uncertainties in elastic and viscoelasticstructures: from A M Freudenthal's criticisms to modern convexmodeling[J]. Computers and Structures，1995，56(6):871～895
[3]	Elishakoff I. Are Probabilistic and Anti-optimization Approa-ches Compatible? Whys and Hows in Uncertainty Modeling:Probability，Fuzziness and Anti-optimization [M]. NewYork: Springer Wien，1999
[4]	吕震宙，冯蕴雯. 结构可靠性问题研究的若干进展[J]. 力学进展，2000，30(1):21～28
[5]	王军，邱志平. 结构的概率-非概率混合可靠性模型[J]. 航空学报，2009，30(8):1398～1404
[6]	郭书祥，吕震宙. 结构可靠性分析的概率和非概率混合模型[J]. 机械强度，2002，24(4):524～526
[7]	孙文彩，杨自春，唐卫平. 随机和区间混合变量下结构可靠性分析方法研究[J]. 工程力学，2010，27(11):22～27
[8]	Rocco C M，Moreno J A. Fast monte carlo reliability evaluationusing support vector machine[J]. Reliability Engineering andSystem Safety，2002，76(3):237～243
[9]	李洪双，吕震宙. 结构可靠性分析的支持向量机响应面法[J]. 计算力学学报，2009，26(2):199～203
[10]	邓乃扬，田英杰. 支持向量机-理论、算法与拓展[M]. 北京:科学出版社，2009
[11]	Guo Z W，Bai G C. Application of least squares support vectorachine for regression to reliability analysis[J]. Chinese Jour-nal of Aeronautics，2009，22(2):160～166
[12]	Zhao H B. Slope reliability analysis using a support vector ma-chine[J]. Computer and Geotechnics，2008，35 (3):459～467
[13]	Chen K Y. Forecasting systems reliability based on support vectorregression with genetic algorithms[J]. Reliability Engineeringand System Safety，2007，92(4):423～432
[14]	Narwaria M，Lin W. Objective image quality assessment basedon support vector regression [J]. IEEE Transactions on Neu-ralNetworks，2010，21(3):515～519
[15]	乔心州. 不确定结构可靠性分析与优化设计研究[D]. 西安电子科技大学，2008:71～81
[16]	马超，吕震宙. 结构可靠性分析的支持向量机分类迭代算法[J]. 中国机械工程，2007，18(7):816～819