Study on the Dynamics Analysis of Delta Parallel Robot
-
摘要: 尺度参数优化是并联机器人设计的最终目标。对研制的Delta并联机器人进行动力学分析,基于虚功原理,建立Delta并联机器人系统的动力学方程,利用奇异值分解理论,以在末端单位加速度下单轴最大输出扭矩在整个工作空间的最大值最小的动力学性能指标作为评价指标,从而获得满足设计需求的一组最优尺度参数。Abstract: Parameter optimization is the ultimate goal in the Delta robot design. Therefore,dynamics analysis is done for the Delta robot in this paper. Based on the virtual work principle,kinematic equation in the Delta robot is built,and the singular value decomposition theory is adopted. Based on the dynamic performance index that the single axle's maximum output torque of the terminal unit acceleration in the whole workspace is minimum,a group of the optimal scaling parameters fitting the design demand is acquired. The present theory supports the theoretical basis for the physical prototype design of parallel robot.
-
Key words:
- constrained optimization /
- design /
- dynamics
-
[1] 李占贤. 高速轻型并联机械手关键技术及样机建造[D].天津:天津大学,2004. [2] 张利敏,梅江平,赵学满. Delta机械手动力学尺度综合[J].机械工程学报,2010,(03):1-7. [3] Li M,Huang T,Chetwynd D G. Dynamic formulation and performance comparison of the 3-DOF modules of two reconfigurable PKMs-the Tricept and the TriVariant[J].ASME Journal of Mechanical Design,2005,(06):1129-1136. [4] 钱慧,杨志永,黄田. Delta机械手动力学尺度综合方法研究[J].机械设计,2004,(zl). [5] 王旭同,方坤,褚立峰. Delta并联机器人的参数优化设计研究[J].煤矿机械,2005,(07):38-40. [6] Liu X J,Wang J S,Pritschow G. Performance atlases and optimum design of planar 5R symmetrical parallel mechanisms[J].Mechanism and MachineTheory,2006,(02):119-144. [7] Huang T,Li Z X,Li M. Conceptual deeign and dimensional synthesis of a novel 2-DOF translational parallel robot for pick-and-place operations[J].ASME Journal of Mechanical Design,2004,(03):449-455. [8] Huang T,Li M,Zhan X Y. Kinematic design of a reconfigurable miniature parallel kinematic machine[J].Chinese Journal of Mechanical Engineering,2003,(01):79-82. [9] 张利敏. 一种三平动高速并联机械手设计方法研究[D].天津:天津大学,2008. [10] 赵永杰. 高速轻型并联机械手动态设计理论与方法[D].天津:天津大学,2006.
点击查看大图
计量
- 文章访问数: 191
- HTML全文浏览量: 17
- PDF下载量: 14
- 被引次数: 0