MPV Front Sub-frame Structure Improvement Based on The Finite Element Analysis
-
摘要: 结合有限元分析法,对某MPV车改进前的整体式加强杆结构和改进后的的断开式加强杆结构的副车架进行实车转弯和制动工况下的刚度、应力及模态对比分析。仿真结果表明:驱动力和制动力工况下改进后的副车架所受应力均比改进前副车架所受应力值小;改进后副车架结构在刚度上优于原改进前结构的刚度,改进后副车架模态频率比改进前副车架模态模态变化较小。预测改进后的副车架结构改进设计能够满足新车使用要求。Abstract: Applying the finite element method,the front sub-frame for the multi-purpose vehicle is analyzed on the cornering and braking conditions. The calculated rigidity,stresses and natural modes are compared between the original front sub-frame structure with the connected reinforcing rod and the new designed front sub-frame structure,with the disconnected reinforcing rod. The results show that the stress of the new designed sub-frame is lower than that of the original front sub-frame on the cornering and braking condition; the stiffness of the new front sub-frame structure is higher than that of the original sub-frame structure; the modal frequencies of the new designed front sub-frame structure is almost the same as those of the original sub-frame structure. It is predicted that the improved design for the sub-frame structure with the connected reinforcing rod can meet the request of the new developed vehicle.
-
Key words:
- boundary conditions /
- braking /
- calculations /
- computer simulation
-
[1] 苑银生. 副车架及其对车辆性能的影响[J].中国城市经济,2010,(08). [2] 许江涛,丁继斌. 基于台架试验方法某轿车前副车架的强度分析[J].南京工业职业技术学院学报,2010,(02):21-23. [3] 唐晓峰,顾彦,廖芳. 前副车架结构动力学建模方法研究[J].上海汽车,2008,(11):17-19. [4] 田鑫,陈赣,史建鹏. 某轿车副车架改进有限元仿真分析[J].汽车科技,2009,(05):49-51. [5] 郑松林,王寅毅,冯金芝. 轿车后副车架结构强度与模态分析[J].上海汽车,2009,(11):20-22. [6] 张立玲,黄黎,叶子青. 轿车副车架轻量化技术研究及应用[J].塑料工程学报,2010,(05):71-75. [7] 廖抒华,成传胜. 基于ABAQUS和Optistruct的商务车副车架的优化设计[J].组合机床与自动化加工技术,2011,(08):83-86. [8] 宋海生,史文库,郭福祥. 基于车地板振动控制的副车架分析与优化[J].汽车工程,2010,(07):601-606. [9] 司景萍,韩璐,任庆霜. 基于ANSYS的自卸车副车架结构模态分析[J].内蒙古工业大学学报,2011,(03):328-333. [10] 林吉靓,朱峰. YJ3128型自卸车副车架有限元分析及优化设计[J].煤矿机械,2011,(08):29-31.
点击查看大图
计量
- 文章访问数: 204
- HTML全文浏览量: 19
- PDF下载量: 5
- 被引次数: 0