The Measurement of the Hole Centers Distance Based on Approximation Centering Method
-
摘要: 利用研制的激光位移传感器的机床测头,以机床为测量仪器的本体,提出了一种便捷高效的孔心距检测方法。该方法利用逼近式孔心定位法,借助机床坐标系,快速精确地得到孔心的相对坐标,进而获得被测工件的孔心距。与传统的孔心距测量方法相比,该方法具有快速、便捷、高精度、非接触式、在位检测的特性。利用一对标准环规验证了该方法的正确性,孔心距的测量精度在三坐标测量机上得到校验,测量误差达到微米级。实验证明:该方法能高效地完成孔心距的在位测量。Abstract: The hole centers distance is difficult measured by using the conventional measurement method. In this paper,new detection method which combine a machine tool probe based on laser displacement sensor is proposed.With the machine tool coordinate system,the centers' relative coordinates are quickly and accurately gotten by using the approximation hole center location,and then the hole centers distance for the measured work piece can be also gotten. Comparing with the traditional measurement method,the present method is rapid,convenient,high precision,non-contact,on-line measurement. Finally,using a pair of standard ring gauge to verify the correctness of the method,checking measurement accuracy of the hole centers distance in the three coordinates measuring machine,measurement errors can reach micron level. The experiment prove the present method can efficiently applied to measure the hole center distance online.
-
Key words:
- computer software /
- coordinate measuring machines /
- design /
- efficiency /
- experiments /
- lasers
-
[1] 马秀玲,赵玉娟,万铁华. 对称型两孔中心距测量方法[J].哈尔滨轴承,2007,(04):41-42. [2] 袁小江. 高精度大尺寸机件的中心距测量检具设计[J].机械设计与研究,2009,(01):75-77. [3] 冯晓峰,余金伟. -Hough变换在零件形位误差检测中的应用[J].机械科学与技术,2011,(06):957-958. [4] 许桢英,唐志豪,李伯全. 基于双目立体视觉的孔心距测量[J].工具技术,2007,(05):83-85. [5] 冯志辉,刘恩海. 用于激光测距的高精度时间数字转换电路[J].光学精密工程,2010,(12):2665-2671. [6] 丁文政,黄筱调,汪木兰. 面向大型机床再制造的进给系统动态特性[J].机械工程学报,2011,(03):135-140. [7] 现代使用机床设计手册编委会. 现代使用机床设计手册[M].北京:机械工业出版社,2006.496-499. [8] 熊志勇,赵斌. 基于梯形棱镜的激光三角法内孔测距传感器[J].光学学报,2011,(12):103-108. [9] 桑宏强,刘丽冰,刘芬. 触发式测头在确定工件坐标系中的应用[J].机床与液压,2009,(08):169-170. [10] 蔡有杰. 数控机床位置精度评定方法对比与分析[J].机械科学与技术,2012,(01):122-123.
点击查看大图
计量
- 文章访问数: 111
- HTML全文浏览量: 15
- PDF下载量: 5
- 被引次数: 0