珩磨机往复换向加速度对珩磨网纹质量的影响研究

张永贵; 杨云江; 徐建华; 龚俊

珩磨机往复换向加速度对珩磨网纹质量的影响研究

1.
兰州理工大学机电工程学院, 兰州 730050;
2.
宁夏银川大河数控机床有限公司, 银川 750021

基金项目:

国家科技重大专项(2011ZX04002-122)资助

详细信息

作者简介:
张永贵(1966-)，高级工程师，博士，研究方向为工业机器人及其应用技术和珩磨加工工艺及其专家系统技术，zhyglut@126.com

计量
- 文章访问数: 159
- HTML全文浏览量: 22
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2010-08-02
- 刊出日期: 2015-06-10

The Effect of Reciprocating Reversing Acceleration in Honing Machine Upon the Reticulate Pattern Quality

1.
College of Mechano-electronic Engineering, Lanzhou University of Technology, Lanzhou 730050;
2.
Ningxia Yinchuan Dahe NC Machine Tool Limited Company, Yinchuan 750021

摘要

摘要: 优质珩磨网纹是珩磨加工的最终目的。讨论了珩磨网纹加工工艺的现状及影响因素。珩磨往复换向加速度的大小影响珩磨网纹的质量,通过对换向加速度的仿真分析,揭示了加速度的变化对主要的珩磨工艺参数及网纹质量的影响。在此分析基础上,得出了珩磨往复换向加速度越大,换向时所形成的圆弧过渡区域越小,珩磨网纹质量越高。
- 珩磨机 /
- 网纹 /
- 加速度 /
- 仿真 /
- 质量
Abstract: The present processing technology for honing net-lines and influence factors are introduced in this paper.Simulation analysis on reciprocating reversing acceleration for honing machine is studied and the effect of accelera-tion change on the main honing machine parameters and quality of reticulate pattern are revealed. According to re-quirements for the actual production, the best reciprocating reversing acceleration is obtained based on the analysis.It is concluded that the bigger honing reversing acceleration, the smaller area of circular arc transition, the higher quality of honing reticulate pattern.
- acceleration /
- computer simulation /
- honing /
- MATLAB /
- numerical analysis

HTML全文

参考文献(10)

[1]	杨光明.气缸套平台网纹加工技术研究[J].柴油机,2007,29(5):43-46Yang G M.Study on platform anilox processing technology of cylinder liner[J].Diesel Engine,2007,29(5):43-46(in Chinese)
[2]	李伯民,赵波.现代磨削技术[M].北京:机械工业出版社,2003Li B M,Zhao B.Modern grinding technology[M].Beijing:China Machine Press,2003(in Chinese)
[3]	Beyerer J.Model-based analysis of groove textures with application to automated[J].Inspection of machined surfaces.Measurement,1995,15:189-199
[4]	梁明柱.金刚石平台网纹珩磨工艺实验研究[D].济南:山东大学,2004Liang M Z.The study of diamond platform anilox honing experimental process[D].Jinan:Master Thesis of Shandong University,2004(in Chinese)
[5]	郭俊平,李芳波.气缸套平台珩磨网纹t p的解析及评定[J].柴油机设计与制造,2008,15(4):43-45Guo J P,Li F B.Analytical and evaluation on tp of the cylinder liner platform honing anilox[J].Design and Production of Diesel Engine,2008,15(4):43-45(in Chinese)
[6]	Pawlus P,Cieslak T,Mathia T.The study of cylinder liner plateau honing process[J].Journal of Materials Processing Technology,2009,209:6078-6086
[7]	程丽君,杨光明.平台网纹加工技术[J].MC现代零部件,2004,4(3):67-69Cheng L J,Yang G M.The processing technology of platform reticulate pattern[J].Modern Parts,2004,4(3):67-69(in Chinese)
[8]	杨力.珩磨工艺与珩磨质量的分析与研究[D].天津:天津大学,2002Yang L.Analysis and research on honing the quality of craft and process[D].Tianjin:Master Thesis of Tianjin University,2002(in Chinese)
[9]	周保复.珩磨要素的合理选择与控制[J].液压与气动,1998,20(2):30-31Zhou B F.Then choice and control of the reasonable honing elements[J].Hydraulic and Pneumatic,1998,20(2):30-31(in Chinese)
[10]	赵波,郑玉歌.内燃机缸套超生高效珩磨的数学模型研究[J].农业机械学报,1998,29(3):134-138Zhao B,Zheng Y G.Study on mathematical models of the ultrasonic vibration high efficiency honing for internal combustion engine cylinder liners[J].Transactions of the Chinese Society for Agricultural Machinery,1998,29(3):134-138(in Chinese)