Flow Behavior of the Hot Forming Part of AA5182 Aluminum Alloy for Vehicle Body Based on Crash
-
摘要: 在应变速率为0.0015 s-1、0.015 s-1、0.15 s-1和1.5 s-1条件下, 对5182铝合金热成形构件试样进行拉伸试验, 建立了5182铝合金修正的Johnson-cook本构模型;通过5182铝合金热成形构件车身的正面碰撞模拟计算, 分析了5182铝合金热成形构件的变形和吸能特性。研究结果表明:随应变率增加, 5182铝合金的流变应力有所增加, 并使断裂应变有所降低。5182铝合金热成形构件车身变形合理, 具有较好的碰撞吸能特性。因此, 验证了5182铝合金热成形构件在车身上应用可行。Abstract: The hot tension for hot forming part of AA5182 aluminum alloy are carried out at the strain rates of 0.0015s-1, 0.015s-1, 0.15s-1, and 1.5s-1, and the developed Johnson-cook constitutive model for the simulation of frontal impact is presented. The energy absorbing performance and mechanical properties for the vehicle body of hot forming part of AA5182 aluminum alloy are analyzed. The results show that the higher the flow stress and the lower the fractured strain of hot forming part of AA5182 aluminum alloy with the increasing of strain rate. The intrusion displacement of the hot forming 5182 aluminum alloy parts is appropriate for the satisfaction of vehicle body, there is a better energy absorbing performance and mechanical properties of hot forming part of AA5182 aluminum alloy for the vehicle body. Therefore the hot forming part of 5182 aluminum alloy can be applied to vehicle body design.
-
Key words:
- acceleration /
- algorithms /
- computer simulation /
- computer software /
- design
-
[1] Sun H T,Hu P,Ma N,et al.Application of hot forming high strength steel parts on car body in side impact[J].Chinese Journal of Mechanical Engineering,2010,23(2):252-256 [2] Toros S,Ozturk F,Kacar I.Review of warm forming of aluminum-magnesium alloys[J].Journal of Materials Processing Technology,2008,207:1-12 [3] Li Daoming,Ghosh A.Tensile deformation behavior of aluminum alloy at warm forming temperatures[J].Materials Science and Engineering,2003,A352:279-286 [4] Smerd R,Winkler S,Salisbury C,et al.High strain rate tensile testing of automotive aluminum alloy sheet[J].International Journal of Impact Engineering,2005,32:541-560 [5] Abedrabbo N,Pourblghrat F,Carsley J.Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models[J].International Journal of Plasticity,2007,23:841-875 [6] Bolt P J,Lanboo N A P M,Rozier P J C M.Feasibility of warm drawing of aluminum products[J].Journal of Materials Processing Technology,2001,115:118-121 [7] Boogaard V D A H,Werkhoven R J,Bolt P J.Modeling of Al-Mg sheet forming at elevated temperatures[J].International Journal of Forming Processes,2001,4:361-375 [8] Li D M,Ghosh A.Biaxial warm forming behavior of aluminum sheet alloys[J].Journal of Material Processing Technology,2004,145:281-293 [9] Picu R C,Vincze G,Ozturk F,et al.Strain rate of sensitivity of the commercial aluminum alloy AA5182-O[J].Material Science and Engineering:A,2005,390:334-343 [10] Boogaard V D A H,Huetink J.Simulation of aluminum sheet forming at elevated temperatures[J].Computer Methods in Applied Mechanics and Engineering,2006,195:6691-6705 [11] Wang Hui,Luo Yingbing,Friedman P,et al.Warm forming behavior of high strength aluminum alloy AA7075[J].Transactions of Nonferrous Metals Society of China,2012,22:1-7 [12] 王孟君,任杰,黄电源,等.汽车用5182铝合金板材的温拉伸流变行为[J].中国有色金属学报,2008,18(11):1958-1963 Wang M J,Ren J,Huang D Y,et al.Flow behavior of 5182 aluminum alloy for automotive body sheet during warm tensile deformation[J].The Chinese Journal of Nonferrous Metals,2008,18(11):1958-1963(in Chinese) [13] 王孟君,周威,任杰,等.汽车用5182铝合金的温拉深成形性能[J].中南大学学报,2010,41(3):936-939 Wang M J,Zhou W,Ren J,et al.Forming properties of 5182 aluminum alloy for automotive body sheet during warm deep drawing process[J].Journal of Central South University,2010,41(3):936-939(in Chinese) [14] 刘合军,郎利辉,李涛.铝合金板材温热成形性能[J].塑性工程学报,2009,16(3):145-148 Liu H J,Lang L H,Li T.Investigation of formability of aluminum alloy sheet at elevated temperature[J].Journal of Plasticity Engineering,2009,16(3):145-148(in Chinese) [15] 张志,郎利辉,李涛,等.高强度铝合金7B04-T6板材温拉伸本构方程[J].北京航空航天大学学报,2009,35(5):600-603 Zhang Z,Lang L H,Li T,et al.Constitutive equations of high strength aluminum alloy sheet 7B04-T6 under warm tension[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(5):600-603(in Chinese) [16] 中国汽车技术研究中心.C-NCAP管理规则[R].天津:中国汽车技术研究中心,2009 China automotive technology and research center.C-NCAP management regulation[R].Tianjin:China Automotive Technology and Research Center,2009(in Chinese)
点击查看大图
计量
- 文章访问数: 174
- HTML全文浏览量: 25
- PDF下载量: 5
- 被引次数: 0