Applying Anti-fatigue Design Method to Structural Designs in Avionics
-
摘要: 介绍了目前现行的抗疲劳设计方法,认为名义应力疲劳设计法适用于航空电子设备结构设计。通过实际设备有限元仿真分析,得到其加速度响应,根据箱体最大加速度响应处的固有频率,确定最大响应振动次数,以此判断选用何种名义应力疲劳设计方法。计算出设备耐久振动的最大应力,用名义应力疲劳判据校核其疲劳强度。Abstract: We present the anti-fatigue design method and believe that the nominal stress fatigue design method suits structural designs in avionics. The finite element analysis of avionics equipment produces its largest acceleration response,whose natural frequency is calculated with the finite element method. According to the natural frequency, the number of the largest response vibration cycles is determined to select the type of nominal stress fatigue design method. The largest endurance vibration stress is calculated. The nominal stress fatigue is used to determine the fatigue life of avionics equipment.
-
Key words:
- acceleration /
- anti-fatigue design /
- avionics
-
[1] 李舜酩.机械疲劳与可靠性设计[M]. 北京: 科学出版社,2006 Li S M. Mechanical fatigue and reliability design[M]. Beijing: Science Press,2006 (in Chinese) [2] 季馨,王树荣.电子设备振动环境适应性设计[M]. 北京:电子工业出版社,2012 Ji X,Wang S R. Adaptive design of electronic equipment vibration environment [M]. Beijing: Electronic Industry Press,2012 (in Chinese) [3] GJB 150-1986. 军用设备环境试验方法,1986 GJB 150-1986. Military Equipment,Environmental Test Methods,1986 (in Chinese) [4] GJB 150A-2009. 军用装备实验室环境试验方法,2009 GJB 150A-2009. Military Equipment Laboratory Envi-ronmental Test Methods,2009 (in Chinese) [5] 邱志平,王晓军.飞机结构强度分析和设计基础[M]. 北京: 北京航空航天大学出版社,2012 Qiu Z P,Wang X J. Aircraft structural strength analysis and design basis [M]. Beijing:Beijing University of Aeronautics and Astronautics Press,2012 (in Chinese) [6] 邱成悌,赵惇殳,蒋全兴.电子设备结构设计原理[M]. 南京: 东南大学出版社,2005 Qiu C T,Zhao D S,Jiang Q X. Electronic equipment design principles[M]. Nanjing: Southeast University Press,2005 (in Chinese) [7] 单辉祖.材料力学[M]. 北京: 北京高等教育出版社,2009 Shan H Z. Mechanics of materials[M]. Beijing: Beijing Higher Education Press,2009 (in Chinese) [8] Steinberg D S. Vibration analysis for electronic equipment[M]. 3rd ed. United State:A Wiley-Interscience Publication,2000 [9] Steinberg D S. Preventing thermal cycling and vibration failures in electronic equipment[M]. United State: A Wiley-Interscience Publication,2001 [10] 王其东,杨竹丰,彦肖龙,等.电子机柜结构连接部位建模[J]. 电子机械工程,2005,21(2): 22-40 Wang Q D,Yang Z F,Yan X L,et al. Modeling of e-lectronic cabinet joints [J]. Electro-mechanical Engi-neering,2005,21(2): 22-40 (in Chinese) [11] 李朝旭.电子设备的抗振动设计[J]. 电子机械工程,2002,18(1): 51-55 Li Z X. Vibration resistance design of electronic equip-ment [J]. Electro-mechanical Engineering,2002,18(1): 51-55 (in Chinese) [12] 王荣乾.车载机柜的动力学分析[J]. 山西建筑,2007,33(2): 344-345 Wang R Q. Kinetic analysis of car rack [J]. Shanxi Architecture,2007,33(2): 344-345 (in Chinese) [13] 张亚峰.车载电子设备的隔振设计[J]. 电子机械工程,2003,(1): 6-8 Zhang Y F. Isolation design vehicle electronic devices[J]. Electro-Mechanical Engineering,2003(1): 6-8 (in Chinese) [14] 林婕.电子设备的振动分析及减振设计方法[J]. 声学与电子工程,2000,(4): 46-48 Lin J. Vibration analysis and damping design of electronic equipment [J]. Acoustics and Electronics Engineering,2000,(4): 46-48 (in Chinese) [15] 周传月,郑红霞,罗慧强,等. MSC. Nastran 动力学分析应用与实例[M]. 北京: 科学出版社,2005 Zhou C Y,Zheng H X,Luo H Q,et al. MSC. Nastran dynamic analyze application and example[M]. Beijing:Science Press,2005 (in Chinese)
点击查看大图
计量
- 文章访问数: 208
- HTML全文浏览量: 32
- PDF下载量: 6
- 被引次数: 0