Effect of the Teeth Number of Forming Rolls on the Foil Forming of Honeycomb Half-cell Structure
-
摘要: 高强度金属蜂窝芯的制备方法是将金属箔材滚压成为蜂窝半格结构件,然后将其胶结或点焊成为蜂窝芯。基于蜂窝半格结构件滚压成形的工艺特点,利用ANSYS/LS-DYNA有限元软件对蜂窝半格结构件滚压成形进行有限元建模及弹塑性分析,得到了箔材成形过程中成形辊齿数对成形件形状尺寸、应力应变的影响规律。将有限元弹塑性分析结果应用于成形辊设计及制造,并将成形件的仿真数值与实验数值进行比较。结果表明:运用有限元分析来解决传统箔材滚压成形的缺陷是有效的。
-
关键词:
- 金属蜂窝芯 /
- 蜂窝半格结构件 /
- 滚压成形 /
- ANSYS/LS-DYNA /
- 成形辊齿数
Abstract: A method for manufacturing high-strength metal honeycomb core is to roll metal foil into honeycomb halfcell structure,and then to cement or weld them into honeycomb core. Based on the characteristics in the roll forming process of honeycomb half-cell structure,the influencing rule of the teeth number of forming rolls on the stress, strain,hape and dimension of molded parts in the roll forming is obtained by using ANSYS / LS-DYNA software. Finite element elastoplastic analysis is applied to design and manufacture theforming rolls. Comparing the simulation with experimental values of forming pieces,the results show that it is effective to protect the defects of traditional honeycomb half-cell structure in the rolling forming by using FEM.-
Key words:
- ansys/ls-dyna /
- computer simulation /
- computer software /
- efficiency /
- elastoplasticity
-
[1] Gibson L J,Ashby M F.Cellular solids,structures and properties[M]. 2nd Edition.Cambridge University Press.Cambridge,UK,1997 [2] Wu E B,Jiang W S.Axial crush of metallic honeycombs[J]. International Journal of Impact Engineering,1997,19(5-6):439-456 [3] Balawi S,Abot J L.A refined model for the effective in-plane elastic moduli of hexagonal honeycombs[J]. Composite Structures,2008,84(2):147-158 [4] Liu Y,Zhang X C.The influence of cell micro-topology on the in-plane dynamic crushing of honeycombs[J]. International Journal of Impact Engineering,2009,36(1):98-109 [5] 罗昌杰,周安亮,刘荣强,等.金属蜂窝异面压缩下平均压缩应力的理论模型[J]. 机 械 工 程 学 报,2010,46(18):52-59 Luo C J,Zhou A L,Liu R Q,et al.Average compres-sive stress constitutive equation of honeycomb metal under out-of-plane compression[J]. Journal of Mechanical Engineering,2010,46(18):52-59(in Chinese) [6] Jacobsen K M.Collision dynamics modeling of crash en-ergy management passenger rail equipment[D]. Tufts University,2008 [7] Simic G,Lucanin V,Milkovic D.Elements of passive safety of railway vehicles in collision[J]. International Journal of Crashworthiness,2006,11(4):357-369 [8] Lin P Y.Process for making a honeycomb core from a honeycomb half-cell structure and honeycomb core thereby[P]. US:5296280,1994 [9] Arnold P J,Brown R L,Santucci R J,et al.Apparatus and processes for forming a hexagonal-cell honeycomb core,and the core formed thereby[P]. Europe:EP0614415 B1[P]. 1998 [10] 王晓光.大型铝蜂窝部件工艺质量控制[J]. 航天工艺,1994(4):52-54 Wang X G.Large aluminum honeycomb parts quality control process[J]. Journal of Aerospace Technology,1994,(4):52-54 (in Chinese) [11] 贾旭鹏,刘泓滨,刘荣,等. 成形法制备半蜂窝波形条的有限元模拟[J]. 机械设计与制造,2007,(3)Jia X P,Liu H B,Liu R,et al.The finite element simu-lation of the form-based half honeycomb profile strip[J]. Machinery Design and Manufacture,2007,(3) (in Chinese) [12] 黄晓斌,叶玉刚,郑爱萍.铝峰窝的性能特点及其加工方法[J]. 机械管理开发,2005,(6):172-176 Huang X B,Ye Y G,Zheng A P.The performance characteristics and machining of aluminium honeycomb[J]. Mechanical Management and Development,2005,(6):172-176 (in Chinese) [13] 梁炳文,胡世光.板料成形塑性理论[M]. 北京: 机械工业出版社,1987 Liang B W,Hu S G.Sheet metal forming theory of plasticity[M]. Beijing:China Machine Press,1987(in Chinese) [14] 王泽鹏,胡仁喜,康士延,等.ANSYS 13.0/LS-DYNA非线性有限元分析实例指导教程[M]. 北京:机械工业出版社,2011 Wang Z P,Hu R X,Kang S Y,et al.13.0 ANSYS /LS-DYNA nonlinear finite element analysis of the case guidance tutorial[M]. Beijing:China Machine Press,2011 (in Chinese) [15] 王飞,刘泓滨,蒋志涛,等.基于LS-DYNA 的半蜂窝芯材成型过程仿真与分析[J]. 科技导报,2008,(13) Wang F,Liu H B,Jiang Z T,et al.Forming process simulation of half-honeycomb profile strip based on LS-DYNA.[J]. Science and Technology Review,2008,(13) (in Chinese)
点击查看大图
计量
- 文章访问数: 257
- HTML全文浏览量: 20
- PDF下载量: 3
- 被引次数: 0