The Mechanism Analysis and Experiments of the Smaller Hole Finishing of Liquid-magnetic Abrasive Tool
-
摘要: 针对发动机上喷油孔、高压油管等小孔内壁光整加工困难的问题,设计了一种适用于小孔内壁光整加工的新装置。阐述了液体磁性磨具对小孔内壁光整加工的机理,在此基础上分析了影响材料去除率的因素,并且通过实验验证了入口压力、外加电流强度(即磁场强度)、加工时间等因素对加工效率以及加工后小孔内壁最终表面粗糙度的影响,从而得出了优化的小孔内圆表面光整加工参数,对实施其他小孔内圆表面的光整加工有一定的指导和借鉴作用。Abstract: Contraposing the difficulty of finishing inner wall of smaller hole such as spit hole and fuel injection pipe on engine,a new equipment for finishing inner wall of smaller hole is designed,elaborating the mechanism of fin-ishing inner wall of smaller hole. On the basis of analyzing the Influencing factors of material removing rate. And through the experiment verifying the factors of inlet pressure,impressed current intensity (magnetic field intensity) and processing time that influenced the processing efficiency and the final surface roughness of finished smaller hole. The optimal parameters of finishing the smaller hole was summarized,which can be used as a tentative refer-ence in finishing other smaller hole.
-
Key words:
- finishing technology /
- liquid-magnetic abrasive tool /
- smaller hole /
- surface roughness
-
[1] 黄光明，章成军．液体挤压研磨技术在喷油嘴喷孔加工中的应用[J]. 现代车用动力，2003，109(1): 24-25 Huang G M，Zhang C J. Liquid extruding and polishing technology in the application of processing nozzle spray hole[J]. Modern Vehicle Power，2003，109(1): 24-25 (in Chinese) [2] 陈登．模拟探讨喷油嘴孔径及孔数对柴油机燃烧特性的影响[J]. 柴油机，2007，29(3): 21-24 Chen D. Simulation research on the effect of the diameter and number of nozzle holes on diesel's combus-tion characteristics[J]. Diesel Engine，2007，29(3): 21-24 (in Chinese) [3] 袁永先．喷油嘴结构对柴油机性能影响的研究[J]. 车用发动机，2004，149(1): 24-26 Yuan Y X. Study on effect of fuel injector structure on diesel engine performance[J]. Vehicle Engine，2004，149(1): 24-26 (in Chinese) [4] 聂建军．柴油机高压油管的现代设计方法与实验研究[J]. 研究与开发，2009，(9): 65-67 Nie J J. Modern design and experimental study on the high-pressure fuel pipe of diesel engine[J]. Automobile Parts，2009，(9): 65-67 (in Chinese) [5] 孙桓五．液体磁性磨具光整加工技术研究[D]. 太原:太原理工大学，2008 Sun H W. Study on the fluid magnetic abrasive finishing technology[D]. Taiyuan: Taiyuan University of Technol-ogy，2008 (in Chinese) [6] 张学成．戴一凡．磁射流抛光技术研究[J]. 机械设计与制造，2007，12(2): 114-116 Zhang X C，Dai Y F. Study on magnetorheological jet polishing technology[J]. Machinery Design and Manu-facture，2007，12(2): 114-116(in Chinese) [7] 郝建军．液体磁性磨具光整加工实验装置的研制与开发[D]. 太原:太原理工大学，2005 Hao J J. Research and development of liquid magnetic abrasive finishing experimental device[D]. Taiyuan:Taiyuan University of Technology，2005 (in Chinese) [8] 茹秋生，杨世春．液体磁性磨具光整加工机理的研究[J]. 机械工程与自动化，2006，135(2): 18-22 Ru Q S，Yang S C. Research on finishing mechanism of liquid magnetic abrasive[J]. Mechanical Engineering and Automation，2006，135(2): 18-22 (in Chinese) [9] 李唯东，杨胜强．液体磁性磨具光整加工法及其磨具的性能研究[J]. 科技情报开发与经济，2007，17(2): 172-174 Li W D，Yang S Q. Study on the liquid-magnetic abra-sive tool finishing technology and the performance of the abrasive tool[J]. Sci-tech Information Development and Economy，2007，17(2): 172-174 [10] Carlson J D. What makes a good MR fluid[C]// Conf．Electrorheological Fluids and Magnetorheological Sus-pensions，France:World Scientific，2001: 63-69 [11] 赵磊．小孔磨粒流抛光技术研究[D]. 长春:长春理工大学，2011 Zhao L. Research on abrasive flow polishing small hole technology[D]. Changchun: Changchun University of Technology，2011 (in Chinese) [12] Yang G，Spencer Jr B F，Carlson J D，et al. Large-scale MR fluid dampers:modeling and dynamic per-formance considerations[J]. Engineering Structures，2002，(24): 309-323 [13] 黄颖，张向军．喷油嘴微喷孔挤压研磨液及其试验研究[J]. 中国表面工程，2011，24(5): 68-71 Huang Y，Zhang X J. Extrude honing abrasive slurry and its honing experiments for fuel jet nozzle[J]. China Surface Engineering，2011，24(5): 68-71 (in Chinese) [14] 唐维平．喷油嘴喷孔液体挤压研磨工艺研究[J]. 现代车用动力，2003，110(2): 30-33 Tang W P. Study on grinding process of liquid extrusion nozzle hole[J]. Modern Vehicle Power，2003，110(2): 30-33 (in Chinese) [15] 马会青．双排喷孔液体挤压研磨压力的研究[J]. 现代车用动力，2011，143(3): 41-44 Ma H Q. Research on liquid extrusion grinding in two lines spray[J]. Modern Vehicle Power，2011，143(3): 41-44 (in Chinese) -
点击查看大图
计量
- 文章访问数: 157
- HTML全文浏览量: 36
- PDF下载量: 4
- 被引次数: 0
下载:
