|
|
Articles:2018,Vol:23,Issue(3):159-163 |
|
|
Citation: |
|
|
WEI Xieben, SUN Peiming. Application of Elastic Stiffness Damper with Disc Spring to Numerical Control Punch[J]. International Journal of Plant Engineering and Management, 2018, 23(3): 159-163 |
|
|
|
|
|
|
|
| Application of Elastic Stiffness Damper with Disc Spring to Numerical Control Punch |
|
| WEI Xieben, SUN Peiming |
|
| Jieyang Vocational and Technical College, Guangdong Jieyang 522000, China |
| Abstract: |
| The paper aims to analyze the impacts of punch damper stiffness on equipment base and vibration, and introduce the development and application of a disc spring damper featured hard-soft-hard variable stiffness. A damper has four damping columns with C-type disc springs whose laminates plate number gradually increases set by set. Compared with its counterparts, this kind of dampers has the advantages of high energy absorption and vibration damping effect, which not only can effectively reduce the vibration of the foundation of punch press, but also prevents the vibration range from increasing. Also, this kind of dampers is of low cost and convenient to use. |
| Key words:
numerical control punch
shock absorber
elastic stiffness
disc spring
|
|
| Received: 2017-07-27
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2018.0305 |
| Funds: This paper is supported by the Scientific Research Project of Jieyang Vocational and Technical College (2017JYCKY01), and the Innovation and Development Special Fund Project of Jieyang (2017xm014) |
| Corresponding author:
Email： |
Author description: WEI Xieben is a lecturer in Jieyang Vocational and Technical College. His research interests include the mechanical fault diagnosis and mechatronics technology. weixieben@qq.com
SUN Peiming is a professor in Jieyang Vocational and Technical College. His research interests include mechanical engineering and mold design. sunyulixj@163.com
|
|
|
|
|
|
|
|
References: |
|
|
[1] Li H M, Zhu R Y, Zhou J Z, et al. Researches on properties of pneumatic vibration isolator[J]. Journal of Hubei University Technology. 2006,21(3):63-65(in Chinese)
[2] Yang Z F, Li C X, Wang Y G, et al. Studies on the vibration and isolation of J36-250B press machine[J]. Environmental Projects, 1994,12(2):38-42(in Chinese)
[3] Cheng D X. Mechanical design handbook[M]. 5th ed. Beijing:Chemical Industry Press. 2010(in Chinese)
[4] Liu Y Z, Chen W L, Chen L Q, et al. Mechanical vibration[M]. Beijing:Higher Education Press, 1998(in Chinese)
[5] Li J P, Wang E F, Fu Q X, et al. The control and analysis of the vibration of high-speed press machine[J]. Guangdong:Electromechanical Engineering Technology, 2006,35(6):56-58(in Chinese)
[6] Chen W, Liu G, Chen W M. The establishment and the analysis of the dynamic model with double freedom degrees for punch press isolating vibration foundation[J]. Forging & Stamping Technology, 2001,(4):48-51(in Chinese)
[7] Chen A G. The research and control of the basic vibration of high-speed punch press[J]. Journal of Architecture Knowledge, 2012(B06):5-6(in Chinese)
[8] Du J M, Dai S X. Research on dynamic characteristics of sancer damper[J]. Construction Machinery and Equipment, 2009,40(11):15-18(in Chinese) |
|
|
|
|
|
|
|
