|
|
Articles:2017,Vol:22,Issue(3):167-174 |
|
|
Citation: |
|
|
WANG Wan, HUA Run-ze. The Design and Aanalysis of a New Style Oil-saving Device[J]. International Journal of Plant Engineering and Management, 2017, 22(3): 167-174 |
|
|
|
|
|
|
|
| The Design and Aanalysis of a New Style Oil-saving Device |
|
| WANG Wan, HUA Run-ze |
|
| Chemistry and Chemical Engineering College, Guizhou University, Guiyang 550025, P. R. China |
| Abstract: |
| For the sake of saving energy and reducing emissions, this paper will introduce a design of oil-saving device for the simple cylinder 250 water-cooled petrol engine. The oil-saving device is based on the principle of heat transfer and capture. By raising the heat of the oil mist up to 50 ℃, absorption and gathering the released gas from the opening valve, the engine can achieve fuel-saving purpose. The oil-saving device was made by 3D print technology. UG8.0 and ANSYS workbench were used in the design of device. |
| Key words:
heat exchange
capture
ANSYS workbench
oil-saving device
|
|
| Received: 2017-02-28
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2017.0307 |
| Funds: The paper is surported by the China Scholarship Council(CSC) (201608525023). |
| Corresponding author:
Email： |
Author description: WANG Wan is an associate professor in Chemistry and Chemical Engineering College, Guizhou University. Her research interest is chemical equipment design and manufactuing. 746127020@qq.com
HUA Run-ze is a master candidate in Chemistry and Chemical Engineering College, Guizhou University. Her research interest is chemical equipment design and manufactuing. 1092755006@qq.com
|
|
|
|
|
|
|
|
References: |
|
|
[1] Zhang D M. Talking about carburetor fuel potential of automobile[J]. Automobile Engine, 1994,(4):61-62 (in Chinese)
[2] Xu X P. The influence and the quality control of the carburetor of universal small gasoline engine emissions[J]. Motorcycle Technology, 2005,(8):29-32 (in Chinese)
[3] Xiao G, Zhang Y S, Lang J, et al. The test of emissions performance impact and Inlet temperature for gasoline direct injection compression engine combustion[J]. Transactions of Csice, 2014,(2):125-130 (in Chinese)
[4] Tan T E, Dou M. Principles of chemical engineering (I)[M]. 4th ed. Beijing: Chemical Industry Press, 2013 (in Chinese)
[5] Ding Y, Li X F. 8.0 Chinese version from entry to the proficient in UG NX (with CD) (CAX engineering application series)[M]. Beijing: Tsinghua University Press, 2013 (in Chinese)
[6] Pu G Y. ANSYS Workbench tutorials and example explanation[M]. 2nd ed. Wuhan: Water Conservancy and Hydropower Press, 2013 (in Chinese) |
|
|
|
|
|
|
|
