Articles:2017,Vol:22,Issue(1):47-58
Citation:
LIU Qing, ZHANG Guang-peng, HUANG Yu-mei, CHEN Lei. Research of Plane Grinding under Combined Movement of X-Y Axis[J]. International Journal of Plant Engineering and Management, 2017, 22(1): 47-58

Research of Plane Grinding under Combined Movement of X-Y Axis
LIU Qing1,2, ZHANG Guang-peng1, HUANG Yu-mei1, CHEN Lei1
1 School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, P. R. China;
2 Shaanxi Polytechnic Institutes, Shaanxi Xian'yang 712000, P. R. China
Abstract:
There are many parameters which can influence plane grinding. It is a situation in high workload and poor realizability to find the optimization parameters of the grinding by using experimental method. Taking x-y linkage plane grinding as the platform, influence of grinding quality with 4 factors including initial diameter of the abrasive, initial phase angle, lapping plate & workpiece speed ratio and x-y linkage workbench through simulation is studied. The results show that initial radius vector of the abrasive basically has not effect on grinding trace. When speed ratio between lapping plate with workpiece is decimal the grinding trace seems much better. The significant influence of grinding quality can made by straight and helical x-y linkage motion on workbench.
Key words:    multi-parameter plane grinding machine    grinding curve    simulation   
Received: 2017-01-06     Revised:
DOI: 10.13434/j.cnki.1007-4546.2017.0107
Corresponding author:     Email:
Author description:
Service
PDF(1890KB) Free
Print
Authors
LIU Qing
ZHANG Guang-peng
HUANG Yu-mei
CHEN Lei

References:
[1] Zhang Z F, Yan W X, Zhang L, et al. Effect of mechanical process parameters on friction behavior and material removal during sapphire chemical mechanical polishing[J]. Microelectronic Engineering, 2011,(88):3020-3028
[2] Yoshinori T, Hidekazu M. Effect of focusing flow on stationary spot machining properties in elastic emission machining[J]. Nanoscale Research Letters, 2013,(8):237-242
[3] Ajay S, Jain V K. Analysis of forces on the freeform surface in magnetorheological fluid based finishing process[J]. International Journal of Machine Tools and Manufacture, 2013,(69):1-10
[4] Kametz D A. Precision fabrication and development of charging and testing methods of fixed-abrasive lapping plates[D]. Raleigh:North Carolina State University, 2003
[5] Zhang L, Tam H Y, Yuan C-M, et al. An investigation of material removal in polishing with fixed abrasives[J]. Journal of Engineering Manufacture, 2002,216(1):103-112
[6] Chiou Y C, Lee R T, Yau C L. A novel method of composite electroplating on lap in lapping process[J]. International Journal of Machine Tools and Manufacture, 2007,(47):361-367