|
|
Articles:2016,Vol:21,Issue(1):20-34 |
|
|
Citation: |
|
|
MA Xin-wu, GAN Yi, SUN Fu-jia. Research on Extraction of Bottom of Shoe Pattern Based on Binocular Stereo Vision[J]. International Journal of Plant Engineering and Management, 2016, 21(1): 20-34 |
|
|
|
|
|
|
|
| Research on Extraction of Bottom of Shoe Pattern Based on Binocular Stereo Vision |
|
| MA Xin-wu, GAN Yi, SUN Fu-jia |
|
| College of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, P. R. China |
| Abstract: |
| In order to quickly and efficiently get the information of the bottom of the shoe pattern and spraying trajectory, the paper proposes a method based on binocular stereo vision. After acquiring target image, edge detection based on the canny algorithm, the paper begins stereo matching based on area and characteristics of algorithm. To eliminate false matching points, the paper uses the principle of polar geometry in computer vision. For the purpose of gaining the 3D point cloud of spraying curve, the paper adopts the principle of binocular stereo vision 3D measurement, and then carries on cubic spline curve fitting. By HALCON image processing software programming, it proves the feasibility and effectiveness of the method. |
| Key words:
binocular stereo vision
camera calibration
edge
stereo matching
fitting
|
|
| Received: 2016-02-03
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2016.0103 |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Wu C Y, He L Y, Li Q C, et al. Method for extraction of information of shoe upper and for automatic generation of spraying trajectory[J]. Chinese Journal of Mechanical Engineering, 2008,44(8):86-87 (in Chinese)
[2] Zuo L, Jiang H D, Zhang Y M. Automatic dispensing machine for shoe sole: China,15505997A[P]. 2004-06-23 (in Chinese)
[3] Kwon D S, Song S K. A method for generating a cementing trajectory of a shoe sole:UK, 226025[P]. 2005-10-26
[4] Kim J Y. CAD-based Automated Robot Programming in Adhesive Spray Systems, 2004, 21(11):625-634
[5] Xue G S. Acquisition of point clouds of cattle in complex situation based on binocular stereo vision[J]. Computer Engineering and Design, 2015,36(5):1390-1391 (in Chinese)
[6] Chen S Y, Liu S. Realization of Computer Vision Based on OpenCV[M]. Beijing:Science Press, 2008 (in Chinese)
[7] Li Z. Binocular vision system calibration based on HALCON[J]. Development & Innovation of Machinery & Electrical Products, 2013,26(3):95-96 (in Chinese)
[8] Wang X H, Qian Y J. An improved canny edge detection algorithm[J]. Mechanical & Electrical Engineering Magazine, 2008,25(12):60-61 (in Chinese)
[9] Zhao P. Research and development of machine vision[M]. Beijing:Science Press, 2012:37-42 (in Chinese)
[10] Yu N G, Qing Y G, Yuan X G. Review of stereo correspondence algorithms[J]. Computer Measurement & Control, 2009,17(5):817 (in Chinese)
[11] Zhu X F. Three-dimensional measurement of the workpiecesize based on binocular vision[D]. Zhejiang:Zhejiang Ocean University, 2014 (in Chinese)
[12] Zhang Y P, Hua X J, Xia L C, et al. Stereo matching with epipolar line constraints based on RANSAC algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2013,11:20-22 (in Chinese)
[13] Luo Z X. Camera calibration based on HALCON[J]. Video Application & Project, 2010,34(4):100-102 (in Chinese)
[14] Wu S X, Wang C Y. Scattered noise segmentation of point cloud data[J]. Journal of Mechanical Engineering, 2007,43(2):230-233 (in Chinese)
[15] Zhou H M, Wang Y M. Non-uniform rational b-splines curve fitting based on the least control points[J]. Journal of Xi'an Jiaotong University, 2008,42(1):73-77 (in Chinese)
[16] Han J, Jiang B C. A B-spline curve fitting algorithm based on contour key points[J]. Applied Mathematics and Mechanics, 2015,36(4):423-430 (in Chinese)
[17] Gan Y, Qi C Q. Study on a class of modifiable C2-continuous quartic parametric curves and surfaces[J]. Journal of Tongji University, 2001,29(2):154-159 (in Chinese) |
|
|
|
|
|
|
|
