|
|
Articles:2012,Vol:17,Issue(3):187-192 |
|
|
Citation: |
|
|
XIE Teng-teng, SUN Tie, XING Ling, ZHANG Su-xiang. The Transient Modal Dynamic Analysis of a Coke Tower[J]. International Journal of Plant Engineering and Management, 2012, 17(3): 187-192 |
|
|
|
|
|
|
|
| The Transient Modal Dynamic Analysis of a Coke Tower |
|
| XIE Teng-teng, SUN Tie, XING Ling, ZHANG Su-xiang |
|
| Liaoning Shihua University, Liaoning 113001, P.R.China |
| Abstract: |
| Dynamic analysis must be performed when the duration of the applied load is short or if the load is dynamic in nature. Wind load, as a random load, can lead to the vibration of the coke tower. In order to study the influence to the strength of the coke tower by wind, ABAQUS was used to conduct the transient modal dynamic analysis of the wind load. The response of the structure during loading and unloading was mainly observed. The results indicate that, with the effect of wind, the maximal nodal displacement appears at the top of the tower, which is 0.79 mm; while the maximal stress locates at the node around the skirt, the maximum is 3.26 MPa. Both of the displacement and stress cannot cause the failure of the structure. After loading and unloading, the structure engenders vibration along the loading direction. The frequency is 10 Hz, under the effect of external loads, it may easily cause the resonance of the structure, which can cause damage to the structure. So it must be taken into consideration during the process of design and operation. |
| Key words:
wind load
coke tower
dynamic analysis
vibration
resonance
|
|
| Received: 2012-06-15
Revised:
|
| DOI: |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Zheng J Y,Dong Q W,Process equipment design．Beijing: Chemical Industry Press,2005 (In Chi-nese)
[2] Ma Y S,Jin T,Earthquakes and wind load analy-sis of tower equipment with ansys.Manufacturing Automation,32(1):37～41 (In Chinese)
[3] Zhuang Z,You X C,Finite element analysis and application based on abaqus.Beijing: Tsinghua University Press,2009 (In Chinese)
[4] Zhang W Y,Dynamic finite element analysis guide of abaqus.Hongkong: The Chinese Book Press,2005 (In Chinese)
[5] Wang C H,Zhang X B,Advance in delayed coking technology.Journal of Huizhou Uni-versity,30(6):13～17,2010 (In Chinese)
[6] Shen H P,Liu Z B,Development of delayed coking technology.Acta Petrolei Sinica(Petro-leum Processing Section),10:14～16,2010(In Chinese)
[7] Chen X L,Duan Z H,Research status and progress of coke columns at home and abroad．Chemical Machinery,36(1):56～59,2009(In Chinese)
[8] Shi Y P,Zhou Y R,Finite element analysis example explanation of abaqus.Beijing: Me-chanical Industry Press,280～302,2006 (In Chinese)
[9] Guo Q J,Han H L,Wind load approximate calculation of tower.Energy and Environ-ment,4:5～9,2009 (In Chinese)
[10] Yu W W,Gao B J,The application of ANSYS in mechanical and chemical equipment.Bei-jing: China Water Conservancy and Electrici-ty Press,204～234,2007 (In Chinese)
[11] Xing L,Sun T,Modal analysis and vibration studies on φ9800 coke drum structure.Pressure Vessel,29(2):17～21,2012 (In Chinese) |
|
|
|
|
|
|
|
