|
|
Articles:2012,Vol:17,Issue(3):173-177 |
|
|
Citation: |
|
|
CHENG Jie-jie, WANG Chun-yan, WANG Hui, BAI Peng-wei, MA Xiao-fang. Rapid Modeling of an Excavator Working Device Based on the Secondary Development of Pro/E[J]. International Journal of Plant Engineering and Management, 2012, 17(3): 173-177 |
|
|
|
|
|
|
|
Rapid Modeling of an Excavator Working Device Based on the Secondary Development of Pro/E |
|
CHENG Jie-jie1 |
|
1. Taiyuan University of Science and Technology, Taiyuan 030024, P.R.China; 2. Shandong Hualu Hengsheng Chemical Limited by Share Ltd, Dezhou 253000, P.R.China |
Abstract: |
In order to shorten the design cycle of the excavator working device, we have proposed a rapid modeling method for the excavator working device which uses parameters. Based on the Pro/toolkit, which is secondary development tool of Pro/E4.0,and combined with Vs C++2005 programming software. It developed a flexible set of MFC visualization-friendly interfaces. Users can enter data in the visual interface according to their needs and it will generate a new part model quickly. So it improves the design quality, shortens the design cycle, and makes the cost lower significantly. |
Key words:
excavator working device
rapid modeling
parameters
Pro/toolkit
secondary development
Pro/engineer;
|
|
Received: 2012-06-15
Revised:
|
DOI: |
Corresponding author:
Email: |
Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Han X J,Guo W Q,Hu J.Design of a equip-ment for checking air tightness of pressure ves-sel.Chinese Hydraulics & Pneumatics,(11):46~48,2004 (In Chinese) [2] QC/T564-2008,Brake performance requirements and test methods of the passenger car,2008 [3] QC/T592-1999,Performance requirements and test methods of the car brake caliper assembly,1999 [4] Liu C,Hu J P,Guo L,Hou B,Design principle of hermetic detector of PLC-based control.Machin-ery Design & Manufacture,(6):233~235,2011(In Chinese) [5] Zhang J J,Ma C Y,Bai G,Liu L F,Differential pressure method applying on air tightness for brake master cylinder of automobile.Machinery Design& Manufacture,(5):116~118,2007 (In Chi-nese) [6] Chen H,Yu H Y,Xu S,The design of intelli-gent inspection instrument for pressure system sealing.Machinery Design Manufacture,(3):60~62,2009 (In Chinese) |
|
|
|
|
|
|
|