|
|
论文:2023,Vol:41,Issue(1):136-143 |
|
|
引用本文： |
|
|
彭帆, 黄玮, 马玉娥, 郭雯. 基于CS-FEM的可膨胀软材料三维增长模拟[J]. 西北工业大学学报 |
|
|
PENG Fan, HUANG Wei, MA Yu'e, GUO Wen. Three-dimensional growth simulation of swellable soft materials based on CS-FEM[J]. Journal of Northwestern Polytechnical University |
|
|
|
|
|
|
|
| 基于CS-FEM的可膨胀软材料三维增长模拟 |
|
| 彭帆1, 黄玮2, 马玉娥2, 郭雯2 |
|
1. 长安大学 理学院, 陕西 西安 710061;
2. 西北工业大学 航空学院, 陕西 西安 710072 |
| 摘要: |
| 基于单元域光滑有限元方法建立了可膨胀软材料大变形增长的三维数值模拟框架,给出了变形梯度的乘法分解格式,选用第二P-K应力和格林应变张量作为功共轭对,推导了软材料刚度矩阵和几何刚度矩阵的数学表达式。基于MATLAB平台实现了所建立的数值方法,分别模拟了可膨胀软材料的各向同性、各向异性增长行为。结果显示,相比各向同性增长,各向异性增长会抑制可膨胀软材料的变形。模拟结果与已有文献计算结果进行比较,比较结果显示形态模式的变化特征和规律吻合较好,证明了该数值框架在模拟可膨胀软材料大变形增长行为方面的有效性,有助于揭示自然界植物生长现象背后的力学机制。 |
| 关键词:
大变形
光滑有限元
软材料
增长力学
|
|
| Three-dimensional growth simulation of swellable soft materials based on CS-FEM |
|
| PENG Fan1, HUANG Wei2, MA Yu'e2, GUO Wen2 |
|
1. School of Science, Chang'an University, Xi'an 710061, China;
2. School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China |
| Abstract: |
| In this paper, a three-dimensional numerical framework for modeling growth of swellable soft materials at large deformation is established based on the cell-based smooth finite element method, and the multiplicative decomposition scheme of deformation gradient is given. The second P-K stress and Green's strain tensor are selected as work conjugate pairs, and the corresponding mathematical expressions of stiffness matrix and geometric stiffness matrix are derived. The numerical method is implemented based on Matlab platform, and the isotropic and anisotropic growth behaviors of swellable soft materials are simulated respectively. The results show that anisotropic growth will inhibit the deformation of expandable soft materials compared with isotropic growth. The simulation results are compared with the calculation results in the existing literature. The comparison results show that the characteristics and the morphological mode are in good agreement, which proves the effectiveness of the numerical framework in simulating the growth behavior of expandable soft materials at large deformation, and is able to reveal the mechanical mechanism of the plant growth phenomenon in nature. |
| Key words:
large deformation
smoothed finite element
soft material
growth mechanics
|
|
| 收稿日期: 2022-05-05
修回日期:
|
| DOI: 10.1051/jnwpu/20234110136 |
| 基金项目: 国家自然科学基金(12172292)资助 |
| 通讯作者: 黄玮(1979-),西北工业大学副教授,主要从事结构疲劳断裂、计算力学及先进算法研究。e-mail:huangwei@nwpu.edu.cn
Email：huangwei@nwpu.edu.cn |
| 作者简介: 彭帆(1993-),长安大学讲师,主要从事计算断裂力学与生物力学研究。
|
|
| 相关功能 |
|
|
|
|
| 作者相关文章 |
|
| 彭帆 在本刊中的所有文章 |
| 黄玮 在本刊中的所有文章 |
| 马玉娥 在本刊中的所有文章 |
| 郭雯 在本刊中的所有文章 |
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] WANG Jianhua, ZHANG Hongwu, ZHENG Yonggang, et al. High-order NURBS elements based isogeometric formulation for swellable soft materials[J]. Computer Methods in Applied Mechanics and Engineering, 2020, 363, 112901
[2] KADAPA C, LI Z F, HOSSAIN M, et al. On the advantages of mixed formulation and higher-order elements for computational morphoelasticity[J]. Journal of the Mechanics and Physics of Solids, 2021, 148:104289
[3] GANGHOFFER J F. A kinematically and thermodynamically consistent volumetric growth model based on the stress-free configuration[J]. International Journal of Solids and Structures, 2013, 50:3446-3459
[4] ZHENG Yonggang, WANG Jianhua, YE Hongfei, et al. A solid-shell based finite element model for thin-walled soft structures with a growing mass[J]. International Journal of Solids and Structures, 2019, 163:87-101
[5] WANG Jianhua, QIU Yisong, ZHANG Hongwu, et al. A solid-shell finite element method for the anisotropic swelling of hydrogels with reinforced fibers[J]. European Journal of Mechanics-A/Solids, 2021, 86:104197
[6] LIU G, DAI K Y, NGUYEN T T. A smoothed finite element method for mechanics problems[J]. Computational Mechanics, 2006, 39(6):859-877
[7] ZENG Wei, LIU Guirong, JIANG Chen, et al. An effective fracture analysis method based on the virtual crack closure-integral technique implemented in CS-FEM[J]. Applied Mathematical Modelling, 2016, 40(5):3783-3800
[8] LIU G, NGUYEN X H, NGUYEN T T. A theoretical study on the smoothed FEM(S-FEM) models:properties, accuracy and convergence rates[J]. International Journal for Numerical Methods in Engineering, 2010, 84(10):1222-1256
[9] ZENG W, LIU G R. Smoothed finite element methods (S-FEM):an overview and recent developments[J]. Archives of Computational Methods in Engineering, 2018, 25:397-435
[10] RODRIGUEZ A K, HOGER A, MCCULLOCH A. Stress-dependent finite growth in soft elastic tissue[J]. Journal of Biomechanics, 1994, 27:455-467
[11] KUHL E. Growing matter:a review of growth in living systems[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2014, 29:529-543
[12] MOULTON D E, LESSINNES T, GORIELY A. Morphoelastic rods. Part I:a single growing elastic rod[J]. Journal of the Mechanics and Physics of Solids, 2013, 61:398-427 |
|
|
|
|
|
|
|
