|
|
论文:2022,Vol:40,Issue(6):1312-1319 |
|
|
引用本文： |
|
|
尉成果, 张志利, 聂徐庆, 张龙. 基于应变-弯矩的半柔壁喷管大挠度变形重构研究[J]. 西北工业大学学报 |
|
|
YU Chengguo, ZHANG Zhili, NIE Xuqing, ZHANG Long. A large-deflection deformation reconstruction method for semi-flexible plate nozzle based on strain-moment relationship[J]. Journal of Northwestern Polytechnical University |
|
|
|
|
|
|
|
| 基于应变-弯矩的半柔壁喷管大挠度变形重构研究 |
|
| 尉成果1,2, 张志利1, 聂徐庆2, 张龙2 |
|
1. 火箭军工程大学 导弹工程学院, 陕西 西安 710025;
2. 中国空气动力研究与发展中心 设备设计与测试技术研究所, 四川 绵阳 621000 |
| 摘要: |
| 为提高超声速风洞半柔壁喷管健康监测能力,发展了基于应变-弯矩关系的柔性壁板大挠度变形重构方法。以超声速风洞多支点半柔壁喷管为研究对象,建立了型面组件力学模型,推导了柔性壁板型面曲线的微分方程,给出了柔性壁板大挠度变形的椭圆积分表达式及解析解。基于薄板变形理论对重构算法进行了修正,采用有限元仿真分析了修正效果,修正后的最大偏差仅为修正前的10.78%。利用0.3 m半柔壁喷管实验平台开展实验验证,结果表明:在6种马赫数工况下,所提方法的变形重构结果与实验结果均能良好吻合,在喷管喉道位置坐标偏差约为结构变形的6.12%,验证了所提变形重构算法的有效性和准确性。 |
| 关键词:
半柔壁喷管
大挠度
变形重构
矩形薄板
椭圆积分
|
|
| A large-deflection deformation reconstruction method for semi-flexible plate nozzle based on strain-moment relationship |
|
| YU Chengguo1,2, ZHANG Zhili1, NIE Xuqing2, ZHANG Long2 |
|
1. College of Missile Engineering, Rocket Force University of Engineering, Xi'an 710025, China;
2. Facility Design and Instrumentation Institute, China Aerodynamics Research and Development Center, Mianyang 621000, China |
| Abstract: |
| To enhance the health detection capability of the semi-flexible plate nozzle in a supersonic wind tunnel, a large-deflection deformation reconstruction algorithm for a semi-flexible plate nozzle based on the strain-moment relationship is developed. The multi-jack semi-flexible plate nozzle in the supersonic wind tunnel is studied; its mechanical model of contour assembly is established. The differential equation of flexible plate contour curve is deduced, and the elliptic integral expression of the flexible plate deformation is given. Based on the deformation theory of a rectangular thin plate, the deformation reconstruction algorithm is modified, and its correction effect is simulated and analysed with the finite element method. The maximum deviation after correction is only 10.78% compared with that before correction. The 0.3 m semi-flexible plate nozzle is used as the experimental platform to carry out the experimental study. The experimental results show that under the 6 Mach number, the large-deflection deformation reconstruction results based on strain-moment relationship are in good agreement with the experimental results. The coordinate deviation of the nozzle throat position is about 6.12% compared with the structural deformation, thus verifying that the deformation reconstruction algorithm in this paper is effective and accurate. |
| Key words:
semi-flexible plate nozzle
large deflection
deformation reconstruction
rectangular plate
elliptic integral
|
|
| 收稿日期: 2022-02-12
修回日期:
|
| DOI: 10.1051/jnwpu/20224061312 |
| 基金项目: 国家自然科学基金(51935006)资助 |
| 通讯作者: 张龙(1991—),中国空气动力研究与发展中心工程师,主要从事风洞结构设计研究。e-mail:long.zhang@cardc.cn
Email：long.zhang@cardc.cn |
| 作者简介: 尉成果(1987—),中国空气动力研究与发展中心副研究员,主要从事风洞结构设计研究
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] 郭东明, 雒建斌, 方岱宁, 等. 大型风洞设计建设中的关键科学问题[J]. 中国科学基金, 2017, 31(5):420-427 GUO Dongming, LUO Jianbin, FANG Daining, et al. Key scientific issues on the design and construction of large wind tunnels[J]. Bulletin of National Natural Science Foundation of China, 2017, 31(5):420-427 (in Chinese)
[2] PARYZ R. Recent developments at the NASA Langley research center national transonic facility[C]//49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2011
[3] 廖达雄, 陈吉明, 郑娟, 等. 0.6 m连续式跨声速风洞总体性能[J]. 实验流体力学,2018, 32(6):88-93 LIAO Daxiong, CHEN Jiming, ZHENG Juan, et al. General performance of 0.6 m continuous transonic wind tunnel[J]. Journal of Experiments in Fluid Mechanics, 2018, 32(6):88-93 (in Chinese)
[4] 中国空气动力研究与发展中心设备设计及测试技术研究所. 大型风洞挠性喷管激光跟踪测量方法:中国, CN201210582090.0[P]. 2013-06-05
[5] 刘政崇, 廖达雄, 董谊信. 高低速风洞气动与结构设计[M]. 北京:国防工业出版社, 2003:381 LIU Zhengchong, LIAO Daxiong, DONG Yixin. Aerodynamic and structural design of high and low speed wind tunnel[M]. Beijing:National Defense Industry Press, 2003:381 (in Chinese)
[6] OHMAN L H. The role of the NAE 5×5 foot wind tunnel in the development of modern airfoil sections[C]//14th Anglo-American Aeronautical Conference, 1975
[7] 聂旭涛, 郭隆德, 刘伯林. 基于ADAMS风洞柔壁喷管动力学仿真分析[J]. 实验流体力学, 2011, 25(2):73-76 NIE Xutao, GUO Longde, LIU Bolin. Dynamics simu-lation and analysis of flexible nozzle in wind tunnel based on ADAMS[J]. Journal of Experiments in Fluid Mechanics, 2011, 25(2):73-76 (in Chinese)
[8] 高川, 周波, 蒋婧妍. 基于CompactRIO的风洞喷管执行器位置监测系统开发[J]. 自动化与仪器仪表, 2020(1):74-76 GAO Chuan, ZHOU Bo, JIANG Jingyan. Development of position monitoring system for wind tunnel nozzle actuator based on CompactRIO[J]. Automation & Instrumentation, 2020(1):74-76 (in Chinese)
[9] 马列波, 陈海峰, 高鹏, 等. 某风洞全柔壁喷管安全运行控制策略设计[J]. 测控技术, 2022,41(3):90-94 MA Liebo, CHEN Haifeng, GAO Peng, te al. Control strategy of safety operation for flexible nozzle in wind tunnel[J]. Measurement & Control Technology, 2022,41(3):90-94 (in Chinese)
[10] KO W L, FLEISCHER V T. Methods for in-flight wing shape predictions of highly flexible unmanned aerial vehicles:formulation of Ko displacement theory[R]. NASA/TP-2010-214656
[11] 王寅, 朱振宇, 陈志平, 等. 一种适于柔性无人机机翼形变的测试方法[J]. 计算机测量与控制, 2012, 20(11):2894-2896 WANG Yin, ZHU Zhenyu, CHEN Zhiping, et al. A method of wing shape predictions for highly flexible UAVs[J]. Computer Measurement & Control, 2012, 20(11):2894-2896 (in Chinese)
[12] DING G, YUE S, ZHANG S, et al. Strain-deformation reconstruction of CFRP laminates based on Ko displacement theory[J]. Nondestructive Testing and Evaluation, 2021, 36(2):145-157
[13] 张科, 袁慎芳, 任元强, 等. 基于逆向有限元法的变形机翼鱼骨的变形重构[J]. 航空学报,2020,41(8):250-260 ZHANG Ke, YUAN Shenfang, REN Yuanqiang, et al. Shape reconstruction of self adaptive morphing wings' fish bone based on inverse finite element method[J]. Acta Aeronautica et Astronautica Sinica, 2020, 41(8):250-260 (in Chinese)
[14] 吴懋琦, 谭述君, 高飞雄. 基于绝对节点坐标法的平面梁有限变形下变形重构[J]. 力学学报, 2021, 53(10):2776-2789 WU Maoqi, TAN Shujun, GAO Feixiong. Shape reconstruction of plane beam with finite deformation based on absolute nodal coordinate formulation[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(10):2776-2789 (in Chinese)
[15] 谭跃刚, 黄兵, 刘虎, 等. 基于分布应变的薄板变形重构算法研究[J]. 机械工程学报, 2020, 56(13):242-248 TAN Yuegang, HUANG Bing, LIU Hu, et al. Research on deformation reconstruction algorithm of thin plate based on distributed strain[J]. Journal of Mechanical Engineering, 2020, 56(13):242-248 (in Chinese) |
|
|
|
|
|
|
|
