论文:2021,Vol:39,Issue(5):987-994
引用本文:
胡嘉悦, 贾乾磊, 章卫国, 李广文, 史静平, 刘小雄. 基于云模型和多目标规划的FADS系统测量精度的研究[J]. 西北工业大学学报
HU Jiayue, JIA Qianlei, ZHANG Weiguo, LI Guangwen, SHI Jingping, LIU Xiaoxiong. Exploring the measurement accuracy of flush air data sensing based on normal cloud model and multi-objective programming[J]. Northwestern polytechnical university

基于云模型和多目标规划的FADS系统测量精度的研究
胡嘉悦, 贾乾磊, 章卫国, 李广文, 史静平, 刘小雄
西北工业大学 自动化学院, 陕西 西安 710072
摘要:
为了提升一种先进的新型机载传感器——嵌入式大气数据传感器(flush air data sensing,FADS)的测量精度,以正态云模型和多目标规划(multi-objective programming,MOP)为出发点,在原有的"三点法"基础上提出一种新的改进方法。基于CFD软件得到的数据库和亚音速及超音速情况下的空气动力学知识建立高精度FADS系统模型,利用正态云模型对测量信号的不确定性和随机性进行量化分析,在对系统冗余信号的融合过程中,基于多目标规划中的松弛变量法和拉格朗日乘子法提出一种新的计算客观权重方法。仿真结果表明,与传统方法相比,新提出的基于云模型和多目标规划的方法可将测量精度提升3.2%,测量数据的离散程度降低68.88%。
关键词:    嵌入式大气数据传感器    正态云模型    多目标规划    松弛变量法    拉格朗日乘子法   
Exploring the measurement accuracy of flush air data sensing based on normal cloud model and multi-objective programming
HU Jiayue, JIA Qianlei, ZHANG Weiguo, LI Guangwen, SHI Jingping, LIU Xiaoxiong
School of Automation, Northwestern Polytechnical University, Xi'an 710072, China
Abstract:
As far as airborne sensors are concerned, the measurement accuracy is an important indicator that cannot be ignored and may directly affect final measurement results. In order to improve the measurement accuracy of a flush air data sensing (FADS), which is an advanced sensor, this paper proposed a new method based on the normal cloud model and the multi-objective programming (MOP). First, the high-precision FADS model is established by using the database obtained with the CFD software and aerodynamics knowledge. Meanwhile, the uncertainty and randomness of signals caused by measurement noise are quantitatively analyzed by using the normal cloud model. Then, in the process of data fusion, a new method for calculating the weights is proposed based on the slack variable method and the Lagrange multiplier method. The simulation results show that the proposed method can improve the measurement accuracy by 3.2% and reduce the dispersion of measurement data by 68.88%.
Key words:    flush air data sensing (FADS)    normal cloud model    multi-objective programming (MOP)    slack variable method    Lagrange multiplier method   
收稿日期: 2020-12-23     修回日期:
DOI: 10.1051/jnwpu/20213950987
基金项目: 国家自然科学基金(62073266,61374032)资助
通讯作者: 贾乾磊(1995-),西北工业大学博士研究生,主要从事飞行控制与模糊决策研究。e-mail:jiaql@mail.nwpu.edu.cn     Email:jiaql@mail.nwpu.edu.cn
作者简介: 胡嘉悦(1995-),女,西北工业大学博士研究生,主要从事飞行控制、传感器研究。
相关功能
PDF(2097KB) Free
打印本文
把本文推荐给朋友
作者相关文章
胡嘉悦  在本刊中的所有文章
贾乾磊  在本刊中的所有文章
章卫国  在本刊中的所有文章
李广文  在本刊中的所有文章
史静平  在本刊中的所有文章
刘小雄  在本刊中的所有文章

参考文献:
[1] LIU Yanbin, XIAO Dibo. Trade-off design of measurement tap configuration and solving model for a flush air data sensing system[J]. Measurement, 2016, 90:278-285
[2] JIA Qianlei, HU Jiayue, ZHANG Weiguo. A novel fault detection model based on atanassov's interval-valued intuitionistic fuzzy sets, belief rule base and evidential reasoning[J]. IEEE Access, 2020, 8:4551-4567
[3] 张铭格. 高超声速嵌入式大气数据传感系统及研究[D]. 南京:南京航空航天大学, 2014 ZHANG Mingge. Research on flush air data sensing system in hypersonic flight[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2014(in Chinese)
[4] WOLF H, HENRY M W, SIEMERS P M. Shuttle entry air data system(SEADS):optimization of preflight algorithms based on flight results[R]. AIAA-1988-2053
[5] 王鹏. 尖楔前体飞行器FADS系统的径向基网络建模及验证[J]. 气体物理,2019,4(3):23-33 WANG Peng. RBF neural network modeling and validation for fads system applied to the vehicle with sharp wedged fore-bodies[J]. Physics of Gases, 2019, 4(3):23-33(in Chinese)
[6] 王鹏,金鑫. 尖锥前体飞行器FADS系统的人工神经网络建模及风洞试验研究[J]. 实验流体力学,2019,33(5):58-64 WANG Peng, JIN Xin. Study on artificial neural network modeling and wind tunnel test for the fads system applied to the vehicle with sharp nosed fore-bodies[J]. Journal of Experiments in Fluid Mechanics, 2019, 33(5):58-64(in Chinese)
[7] 王逸斌,刘学强,覃宁,等. 嵌入式大气数据系统Kriging算法模型[J]. 测控技术,2015,34(3):138-141 WANG Yibin, LIU Xueqiang, TAN Ning, et al. A novel flush air data system model based on Kriging algorithm[J]. Measurement and Control Technology, 2015, 34(3):138-141(in Chinese)
[8] 李少雄,张军超. 嵌入式大气数据系统算法研究[J]. 航空科学技术,2015,26(12):37-42 LI Shaoxiong, ZHANG Junchao. Research on algorithms of flush air data system[J]. Aeronautical Science and Technology, 2015,26(12):37-42(in Chinese)
[9] 王岩,郑伟. 分布嵌入式大气数据系统算法的初步研究[J]. 飞机设计,2008,28(6):5-11 WANG Yan, ZHENG Wei. Elementary study on the distributed flush air data system arithmetic[J]. Aircraft Design, 2008,28(6):5-11(in Chinese)
[10] 王鹏. 钝头机体用嵌入式大气数据传感系统的改进三点式算法[J]. 力学与实践,2019,41(2):188-195 WANG Peng. The Modified triples algorithm for flush air data sensing system applied to the vehicle with blunt fore-bodies[J]. Mechanics in Engineering, 2019, 41(2):188-195(in Chinese)
[11] PENG Honggang, WANG Jianqiang. A multicriteria group decision-making method based on the normal cloud model with zadeh's z-numbers[J]. IEEE Trans on Fuzzy Systems, 2018, 26(6):3246-3260