论文:2021,Vol:39,Issue(5):978-986
引用本文:
黄峻峰, 贺尔铭, 陈鹏翔, 李永志. 某型改性环氧树脂力热特性研究[J]. 西北工业大学学报
HUANG Junfeng, HE Erming, CHEN Pengxiang, LI Yongzhi. Study on mechanical and thermal properties of a modified epoxy resin[J]. Northwestern polytechnical university

某型改性环氧树脂力热特性研究
黄峻峰, 贺尔铭, 陈鹏翔, 李永志
西北工业大学 航空学院, 陕西 西安 710072
摘要:
对某型改性环氧树脂材料在-35℃~120℃温度范围内进行单轴拉伸试验、热膨胀系数测试及常温冲击试验,探究了其在温变环境下的力热特性。提出了该材料适用于特定温变环境下的本构模型,并建立了不同温度区间的断裂判据。在Matlab中进行数值模拟结果与试验所得曲线拟合程度良好;并将所得本构模型应用于ABAQUS中建模计算并验证结果。结果表明:该改性环氧树脂比常规环氧树脂如E-44、E-51、EPON E863等具有更好的强度、刚度、冲击韧性及更低的热膨胀系数,适合作为星载电子元器件灌封的基体材料。提出的经验型本构模型经过插值得到该材料在-35℃~120℃范围内任意温度下的应力-应变关系,并可直接用于电子元器件灌封体中相关力热仿真分析当中。
关键词:    改性环氧树脂    力热特性    本构模型   
Study on mechanical and thermal properties of a modified epoxy resin
HUANG Junfeng, HE Erming, CHEN Pengxiang, LI Yongzhi
School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China
Abstract:
The uniaxial tensile test, linear expansion coefficient test of a modified epoxy resin in the ambient temperature range from -35℃ to 120℃, and the impact test at room temperature were carried out to explore its mechanical and thermal characteristics under temperature change environment. The constitutive model of the material suitable for temperature change environment is deduced, the numerical calculation is carried out in MATLAB, compared with the relative tested curve, and the obtained constitutive model is applied to the modeling calculation in ABAQUS and the results are verified. The results show that the modified epoxy resin has better strength, stiffness, impact toughness and lower coefficient of linear expansion than common epoxy resins such as E-44, E-51 and EPON e863. The material is suitable to be used as the matrix of spaceborne electronic component potting module. The proposed empirical constitutive model can obtain the stress-strain relationship of the material at any temperature in the range of -35℃~120℃ through interpolation, and can be directly used in relevant damage analysis and life prediction of electronic component potting module. The research method and derivation results have engineering reference value.
Key words:    modified epoxy resin    mechanical and thermal characteristics    constitutive model   
收稿日期: 2021-09-06     修回日期:
DOI: 10.1051/jnwpu/20213950978
通讯作者: 贺尔铭(1964-),西北工业大学教授,主要从事飞机结构动力学与振动控制研究。e-mail:heerming@nwpu.edu.cn     Email:heerming@nwpu.edu.cn
作者简介: 黄峻峰(1997-),西北工业大学硕士研究生,主要从事结构动力学与振动控制、力学仿真分析研究。
相关功能
PDF(2305KB) Free
打印本文
把本文推荐给朋友
作者相关文章
黄峻峰  在本刊中的所有文章
贺尔铭  在本刊中的所有文章
陈鹏翔  在本刊中的所有文章
李永志  在本刊中的所有文章

参考文献:
[1] 杨媛媛, 张成祥, 赵国静, 等. 环氧树脂电子封装胶研究进展[J]. 化学推进剂与高分子材料, 2017, 15(3):54-57 YANG Yuanyuan, ZHANG Chengxiang, ZHAO Guojing, et al. Research progress of epoxy resin electronic packaging adhesive[J]. Chemical Propellants & Polymeric Materials, 2017, 15(3):54-57(in Chinese)
[2] 刘中国. 高性能电子封装材料用环氧树脂的合成与性能研究[D]. 长春:吉林大学, 2013 LIU Zhongguo. High performance epoxy resin using in electronic package material:synthesis and properties studies[D]. Changchun:Jilin University, 2013(in Chinese)
[3] 胡松. 高低温载荷下环氧灌封结构热应力分析研究[D]. 武汉:武汉理工大学, 2018 HU Song. Research on thermal stress of encapsualted assemblies of epoxy resin under high and low temperature load[D]. Wuhan:Wuhan University of Technology, 2018(in Chinese)
[4] 赵福斌. 热振加载环境下电子封装结构的疲劳寿命计算[D]. 西安:西安电子科技大学, 2018 ZHAO Fubin. The fatigue life calculation of the electronic packaging structure under combianed thermal stress and vibration loading conditions[D]. Xi'an:Xidian University, 2018(in Chinese)
[5] JUSTIN D L, CHARLES R R, ROBERT K G, et al. Measurement of epoxy resin tension, compression, and shear stress-strain curves over a wide range of strain rates using small test specimens[J]. Journal of Aerospace Engineering, 2008, 21(3):162-173
[6] TSIAFIS I, BOUZAKIS K D, MICHAILIDIS N, et al. Experimental-computational determination of epoxy resin mechanical properties, used in assembly applications[J]. Mechanical Engineering, 2005, XI:26-32
[7] KIM Y K, WHITE S R. Stress relaxation behavior of 3501-6 epoxy resin during cure[J]. Polymer Engineering & Science, 1996, 36(23):2852-2862
[8] FARD M Y, LIU Y, CHATTOPADHYAY A. Characterization of epoxy resin including strain rate effects using digital image correlation system[J]. Journal of Aerospace Engineering, 2012, 25(2):308-319
[9] IMAI T, SAWA F, OZAKI T, et al. Influence of temperature on mechanical and insulation properties of epoxy-layered silicate nanocomposite[J]. IEEE Trans on Dielectrics & Electrical Insulation, 2006, 13(2):445-452
[10] RAMIREZ L E S, COIMBRA C F M. A variable order constitutive relation for viscoelasticity[J]. Annalen der Physik, 2007, 16(7/8):543-552
[11] PARK H, CHO M. A multiscale framework for the elasto-plastic constitutive equations of crosslinked epoxy polymers considering the effects of temperature, strain rate, hydrostatic pressure, and crosslinking density[J]. Journal of the Mechanics and Physics of Solids, 2020, 142:103962
[12] HU Y, XIA Z, ELLYIN F. Deformation behavior of an epoxy resin subject to multiaxial loadings. Part I:experimental investigations[J]. Polymer Engineering and Science, 2003, 43(3):721-733
[13] POULAIN X, BENZERGA A A, GOLDBERG R K. Finite-strain elasto-viscoplastic behavior of an epoxy resin:experiments and modeling in the glassy regime[J]. International Journal of Plasticity, 2014, 62:138-161
[14] SHERWOOD J A, FROST C C. Constitutive modeling and simulation of energy absorbing polyurethane foam under impact loading[J]. Polymer Engineering & Science, 1992, 32(16):1138-1146
[15] 李勇, 王友善, 杜星文. 环氧树脂的非线性本构模型[J]. 高分子材料科学与工程, 2006(5):32-35 LI Yong, WANG Youshan, DU Xingwen. Non-linear constitutive model of uncured epoxy resin[J]. Polymer Materials Science & Engineering, 2006(5):32-35(in Chinese)
[16] 刘纪艳, 刘晓龙, 段绪胜. 纳米碳酸钙和硅微粉改性环氧树脂结构胶的力学性能研究[J]. 山东农业大学学报, 2018, 49(5):805-808 LIU Jiyan, LIU Xiaolong, DUAN Xusheng. Study on mechanical properties of epoxy resin structural adhesive modified by nanosize CaCO3 and silicon powder[J]. Journal of Shandong Agricultural University, 2018, 49(5):805-808(in Chinese)
[17] 张九枝, 史志铭. 硫酸钙晶须对E-44环氧树脂的微结构与力学性能的影响[J]. 合成材料老化与应用, 2013, 42(04):14-17 ZHANG Jiuzhi, SHI Zhiming. Influences of calcium sulfate whisker on mechanical properties and micro-structure of E-44 epoxy resin[J]. Synthetic Materials Aging and Application, 2013, 42(4):14-17(in Chinese)
[18] 陈昶旭, 王彦平, 张玉双, 等. 混凝土抗风沙防护用SiC增强环氧树脂材料研究[J]. 热固性树脂, 2021, 36(4):48-51 CHEN Changxu, WANG Yanping, ZHANG Shuangyu, et al. Research on SiC-reinforced epoxy materials for concrete protection against wind and sand[J]. Thermosetting Resin, 2021, 36(4):48-51(in Chinese)
[19] 熊欣, 李亚东. 纳米碳酸钙填充改性环氧树脂植筋胶力学性能研究[J]. 科学技术创新, 2021(3):171-173 XIONG Xin, LI Yadong. Study on mechanical properties of epoxy resin reinforced adhesive filled with nano calcium carbonate[J]. Scientific and Technological Innovation, 2021(3):171-173(in Chinese)
[20] 姚艳芳, 姚轶凡, 王云. 纳米纤维素掺杂环氧树脂复合材料的制备及力学性能研究[J]. 功能材料, 2021, 52(7):7186-7190 YAO Yanfang, YAO Yifan, WANG Yun. Preparation and mechanical properties of nano cellulose doped epoxy resin composites[J]. Journal of Functional Materials, 2021, 52(7):7186-7190(in Chinese)
[21] 毕茂强, 彭豪, 文娅, 等. 纳米掺杂环氧树脂热力学性能的分子动力学模拟[J/OL]. (2021-07-30)[2021-08-19]. http://kns.cnki.net/kcms/detail/61.1129.TM.20210730.1344.002.html