|
|
论文:2021,Vol:39,Issue(1):1-8 |
|
|
引用本文： |
|
|
冯蕴雯, 张家乐, 薛小锋, 钟小平, 谢伟. 铝钛复合耳片结构设计及可靠性分析[J]. 西北工业大学学报 |
|
|
FENG Yunwen, ZHANG Jiale, XUE Xiaofeng, ZHONG Xiaoping, XIE Wei. Structure design and reliability analysis of Al-Ti lugs[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
| 铝钛复合耳片结构设计及可靠性分析 |
|
| 冯蕴雯, 张家乐, 薛小锋, 钟小平, 谢伟 |
|
| 西北工业大学 航空学院, 陕西 西安 710072 |
| 摘要: |
| 飞机耳片接头是传递载荷的关键部位，为了提高耳片接头的安全性，在保证满足静强度、疲劳等设计要求的前提下，提出了不同金属材料复合连接耳片结构设计技术。对耳片结构从破损安全设计和寿命可靠性分析方面进行了研究；针对某飞机接头耳片，基于破损安全设计理念及变形协调设计原则，提出了复合连接耳片的设计方法，并依据所提方法确定了"铝-钛-铝"厚度比例为0.8：1：0.8单耳设计方案，进而开展了静力学、损伤容限设计及寿命可靠性分析。结果表明：所提出的铝钛复合耳片结构设计方案可满足静强度和损伤容限要求，且与常规耳片结构对比，复合耳片在质量仅增加4.9%的情况下结构任务寿命失效概率大幅降低。论文所提方法可用于指导复合耳片的结构设计。 |
| 关键词:
复合耳片
破损安全设计
变形协调
可靠性分析
结构设计
|
|
| Structure design and reliability analysis of Al-Ti lugs |
|
| FENG Yunwen, ZHANG Jiale, XUE Xiaofeng, ZHONG Xiaoping, XIE Wei |
|
| School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China |
| Abstract: |
| Aircraft lug joint is the key part of load transfer. In order to improve the safety of lug joint, on the premise of meeting the design requirements of static strength and fatigue, the composite connection lug structure design technology of different metal materials is proposed in this paper. Firstly, the damage safety design and life reliability analysis of the lug structure are studied theoretically. Secondly, based on the concept of damage safety design and the design principle of deformation coordination, the design method of composite connection lug with deformation coordination is proposed, and the thickness ratio of single ear is 0.8:1:0.8. Finally, the reliability of the composite lug is analyzed. The results show that the structural design scheme of aluminum-titanium composite ear piece can meet the requirements of static strength and damage tolerance, and compared with the conventional ear structure, the failure probability of structure mission life is greatly reduced when the weight of the composite connection lug is only increased by 4.9%. The proposed method can effectively guide the structural design of composite ear piece. |
| Key words:
composite connection lug
damage safety design
deformation coordination
life reliability analysis
structural design
damage tolerance
|
|
| 收稿日期: 2020-07-01
修回日期:
|
| DOI: 10.1051/jnwpu/20213910001 |
| 基金项目: 国家自然科学基金（51875465）资助 |
| 通讯作者:
Email： |
| 作者简介: 冯蕴雯(1968-),女,西北工业大学教授、博士生导师,主要从事结构设计与可靠性研究。
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] 董唯莉. TC4钛合金耳片断裂原因分析[J]. 失效分析与预防, 2012, 7(1): 46-49 DONG Weili. Fracture analysis of TC4 titanium alloy ear plate[J]. Failure Analysis and Prevention, 2012, 7(1): 46-49(in Chinese)
[2] 李维娜. 民用飞机耳片接头结构设计[J]. 科技视界, 2017(6): 330-330 LI Weina. Structure design of civil aircraft mechanical fittings[J]. Science & Technology Vision, 2017(6): 330-330(in Chinese)
[3] 徐明波, 黄其青, 殷之平, 等. 基于损伤容限设计思想的连接耳片多目标优化设计[J]. 机械强度, 2010, 32(6): 928-932 XU Mingbo, HUANG Qiqing, YIN Zhiping, et al. Multi-objective optimization design for lug based on damage tolerance[J]. Journal of Mechanical Strength, 2010, 32(6): 928-932(in Chinese)
[4] 徐茂, 彭海锋, 唐义号, 等. 喷射成形7055铝合金耳片接头的应用验证研究[J]. 直升机技术, 2019(2): 42-46 XU Mao, PENG Haifeng, TANG Yihao, et al. Study on application of spray formed 7055 aluminum alloy in the lug joint[J]. Helicopter Technique, 2019(2): 42-46(in Chinese)
[5] 李辉, 陈蓬, 姚泽坤, 等. 钛合金耳片的静载失效分析与结构优化研究[J]. 航空制造技术, 2017(5): 96-99 LI Hui, CHEN Peng, YAO Zekun, et al. Failure analysis and structure optimization of yitanium alloy lug[J]. Aeronautical Manufacturing Technology, 2017(5): 96-99(in Chinese)
[6] Boljanovic, Slobodanka. Computational modeling of aircraft lugs failure under fatigue loading[J]. International Journal of Fatigue, 2018, 114: 252-261
[7] MAKSIMOVIC K, BOLJANOVIC S, DJURIC M. Residual fatigue life estimation of cracked aircraft structural components under load spectrum[J]. Journal of the Serbian Society for Computational Mechanics, 2019, 13(2): 1-7
[8] ANDREA Pieracci. Conditional reliability assessment of aircraft structure under repeated inspections[C]//39th AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics, and Materials Conference, 1998: 1919-1928
[9] ABRAHAM Brot. Assessing the reliability of fail-safe structures[C]//21st Symposium of the International Committee on Aeronautical Fatigue, 2002: 517-528
[10] 民航无损检测人员资格鉴定与认证委员会. 航空器无损检测综合知识[M]. 北京:中国民航出版社, 2014 Civil Aviation Nondestructive Testing Personnel Qualification and Certification Committee. Comprehensive knowledge of aircraft non-destructive testing[M]. Beijing: China Civil Aviation Press, 2014(in Chinese)
[11] 刘文珽. 结构可靠性设计手册[M]. 北京: 国防工业出版社, 2008 LIU Wenting. Hand book of structural reliability design[M]. Beijing: National Defense Industry Press, 2008(in Chinese)
[12] 中国民用航空局. 中国民用航空规章第25部[S]. CCAR-25R4 China Civil Aviation Administration. Part 25 of China civil aviation regulations[S]. CCAR-25R4(in Chinese)
[13] 《飞机设计手册》总编委会. 飞机设计手册第3册(下)[M]. 北京: 航空工业出版社, 2002 General Editorial Board of Aircraft Design Manual. Aircraft Design Manual(Volume 3)[M]. Beijing: Aviation Industry Press, 2002(in Chinese)
[14] 《飞机设计手册》总编委会. 飞机设计手册第9册[M]. 北京: 航空工业出版社, 2002 General Editorial Board of Aircraft Design Manual. Aircraft Design Manual(Volume 9)[M]. Beijing: Aviation Industry Press, 2002(in Chinese)
[15] 李令芳. 民机结构耐久性与损伤容限设计手册下册[M]. 北京: 航空工业出版社, 2003 LI Lingfang. Durability and damage tolerance design manual of civil aircraft structure (Volume Ⅱ)[M]. Beijing: Aviation Industry Press, 2003(in Chinese)
[16] 中华人民共和国军用标准[S]. GJB67.6A Military Standard of China[S]. GJB67.6A (in Chinese)
[17] 张福泽. 疲劳分散系数的分类及取值[J]. 航空学报, 1987(6): 239-244 ZHANG Fuze. The categories and values of fatigue scatter factors[J]. Acta Aeronautica et Astronautica Sinica, 1987(6): 239-244(in Chinese) |
|
|
|
相关文献: |
|
|
1．何新党, 苟文选, 刘永寿, 高宗战, 张峰.考虑失效状态模糊性时的笛形管广义共振可靠性分析[J]. 西北工业大学学报, 2014,32(2): 262-267 |
|
|
|
|
|
|
