|
|
论文:2016,Vol:34,Issue(3):399-403 |
|
|
引用本文： |
|
|
张晨, 胡永红. 道路空-地图像探测控制器可靠性增长设计[J]. 西北工业大学学报 |
|
|
Zhang Chen, Hu Yonghong. Design of Reliability Growth for Air to Ground Graphic Detecting Controller[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
| 道路空-地图像探测控制器可靠性增长设计 |
|
| 张晨, 胡永红 |
|
| 西北工业大学, 陕西 西安 710072 |
| 摘要: |
| 可靠性历来是航空航天领域关注的焦点之一,可靠性增长是产品设计过程中不断完善的迭代过程,但大多工作都局限于概念或顶层框架的研究,未涉及具体工程实现。以道路空——地图像探测控制器可靠性增长设计为背景,提出了一种基于电路优化的可靠性增长综合设计方法。通过分析控制器硬件电路结构,建立了可靠性结构模型与数学模型,根据模型分析结论对控制器基本可靠度较低的D/A结构驱动电路进行了优化,设计了一种基于动态可编程电压比较器的新型驱动电路。通过可靠性评估,优化后控制器的基本可靠性理论上增长了33.2%。进一步的环境应力筛选等可靠性验证试验表明:通过可靠性增长设计后,控制器不仅满足了系统功能与性能指标及可靠性要求,而且体积、重量、成本等综合性能也得到了提高。 |
| 关键词:
控制器
可靠性
可靠性增长分析
可靠性验证
|
|
| Design of Reliability Growth for Air to Ground Graphic Detecting Controller |
|
| Zhang Chen, Hu Yonghong |
|
| Northwestern Polytechnical University, Xi'an 710072, China |
| Abstract: |
| The reliability has always been one of the focuses in the field of aeronautics and astronautics, the reliability growth is a continuous improved iterative process during product design, but most of them are confined to the research of concept or top frame, rather than refer to specific engineering implementation. In this paper, an comprehensive reliability growth design method based on circuit optimization was proposed in the light of reliability growth design of road air-to-ground image detecting controller. The reliability structure model and the mathematical model were established through the analysis of the controller hardware circuit structure, then the D/A structure driving circuit with low reliability of the controller was optimized according to the model analysis conclusion, at last a new driving circuit based on dynamic programmable voltage comparator was presented. Through the reliability assessment, the basic reliability of the optimized controller was increased by 33.2% theoretically. Further reliability verification tests, such as environmental stress screening, showed that: the controller, optimized by the reliability growth design, not only met the system function and performance index and reliability requirements, but also had better comprehensive performances, such as volume, weight, cost and so on. |
| Key words:
controllers
reliability
reliability growth analysis
design of experiments
|
|
| 收稿日期: 2015-09-16
修回日期:
|
| DOI: |
| 基金项目: 国家自然科学基金(61134004)资助 |
| 通讯作者:
Email： |
| 作者简介: 张晨(1991—),西北工业大学硕士研究生,主要从事信息工程与控制的研究。
|
|
| 相关功能 |
|
|
|
|
| 作者相关文章 |
|
| 张晨 在本刊中的所有文章 |
| 胡永红 在本刊中的所有文章 |
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] 刘琦,武小悦. 复杂系统可靠性增长试验评价的集成分析模型[J]. 系统工程理论与实践,2010, 30(8): 1477-1483 Liu Qi, Wu Xiaoyue. Integrated Analysis Model for Reliability Growth Test Evaluation of Complex System[J]. Systems Engineering-Theory & Practice, 2010, 30(8): 1477-1483 (in Chinese)
[2] 张毅刚,彭喜元,彭宇. 单片机原理与应用[M]. 北京:高等教育出版社, 2010: 34-37
[3] 龚庆祥,赵宇,顾长鸿, 等. 型号可靠性工程手册[M]. 北京:国防工业出版社, 2007: 85
[4] Paul Ellner, Nathan Herbert. On Some Properties of a Reliability Growth Planning Model[C]//Reliability and Maintainability Symposium(RAMS), Orlando, Florida, 2013: 1-6
[5] Robert T Kaminski. Developing Effective Reliability Growth Strategies for DoD Programs[C]//Reliability and Maintainability Symposium(RAMS), Orlando, Florida, 2013: 1-5 |
|
|
|
相关文献: |
|
|
1．辛红敏, 史耀耀, 颉潭成, 张建国, 孙鹏程.基于双刀架进给机构的活塞车削技术[J]. 西北工业大学学报, 2014,32(3): 457-463 |
|
|
2．王党辉, 何花, 辛明瑞, 安建峰.一种自主恢复的高可靠存储控制器设计[J]. 西北工业大学学报, 2013,31(3): 429-434 |
|
|
|
|
|
|
