|
|
论文:2012,Vol:30,Issue(6):852-856 |
|
|
引用本文: |
|
|
陈安强, 冯蕴雯, 薛小锋, 冯元生. 用于机构位置监测的传感器误指示可靠性分析[J]. 西北工业大学 |
|
|
Chen Anqiang, Feng Yunwen, Xue Xiaofeng, Feng Yuansheng. An Effective Reliability Analysis of Erroneous Indication of Sensor Applied to Monitoring Mechanism Position[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
用于机构位置监测的传感器误指示可靠性分析 |
|
陈安强, 冯蕴雯, 薛小锋, 冯元生 |
|
西北工业大学 航空学院, 陕西 西安 710072 |
摘要: |
传感器在监测机构是否到位的情况下若发出错误的指示,此时不仅要考虑传感器本身的故障,更应该考虑由机构运动精度问题导致传感器的误判。引入可靠性的概念,将机构各参数均视为随机变量,提出了一种专门用于机构位置监测的传感器发生误指示机构到位的可靠性分析模型和计算方法,并以某型飞机舱门保险机构为例,分析了传感器误指示保险机构锁定到位的失效概率,可为传感器指示可靠性设计提供有益参考。 |
关键词:
错误
数学模型
机构
监测
可靠性分析
示意图
传感器
到位
|
|
An Effective Reliability Analysis of Erroneous Indication of Sensor Applied to Monitoring Mechanism Position |
|
Chen Anqiang, Feng Yunwen, Xue Xiaofeng, Feng Yuansheng |
|
College of Aeronautics,Northwestern Polytechnical University,Xi'an 710072,China |
Abstract: |
This paper describes a particular fault of sensor erroneous indication while monitoring mechanism posi-tion. Thus,we introduce the reliability analysis method regarding parameters in a certain mechanism as randomvariables. Sections 1 through 3 of the full paper explain our reliability analysis mentioned in the title,which we be-lieve is effective. The core of section 3 consists of: 1) the reliability model of sensor applied to monitoring mecha-nism position is established and then the specific calculation method is given; 2) eqs. (6) and (7) are worth noti-cing. Citing the lock mechanism in an airplane as an example,we calculate the possibility of sensor erroneous indi-cation when the mechanism is not in proper position. The calculated results, presented in Tables 2 and 3, and theiranalysis indicate that our reliability analysis can provide helpful reference in the reliability design of sensor. |
Key words:
errors
mathematical models
mechanisms
monitoring
reliability analysis
schematic diagrams
sen-sors;position accuracy
|
|
收稿日期: 2011-10-28
修回日期:
|
DOI: |
通讯作者:
Email: |
作者简介: 陈安强(1986-),西北工业大学硕士研究生,主要从事飞行器总体设计研究
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] 中国民用航空规章第 25 部.运输类飞机适航标准.中国民用航空总局, 2001:062-063China Civil Aviation Regulations Part Twenty-Fifth.Airworthiness Standards: Transport Category Airplanes.General Adminis-tration of Civil Aviation of China, 2001, 062-063 (in Chinese) [2] Guidelines And Methods for Conducting The Safety Assessment Process on Civil Airborne Systems and Equipment.SAE, 1996 [3] Yang Qingyu,Chen Yong.Sensor System Reliability Modeling and Analysis for Fault Diagnosis in Multistage ManufacturingProcesses.Institute of Industrial Engineers, 2009, 41(9):819-830 [4] Yang Qingyu,Chen Yong.Reliability of Coordinate Sensor Systems under the Risk of Sensor Precision Degradations.IEEETrans on Automation Science and Engineering, 2010, 7(2): 291-302 [5] Behbahani Alireza R.Need for Robust Sensors for Inherently Fail-Safe Gas Turbine Engine Controls,Monitoring,and Prognos-tics.USA: Air Force Research Lab Wright-Patterson Directorate, 2006 [6] Tappan Jacqueline M.Designing an Error Resolution Checklist for a Shared Manned-Unmanned Environment.USA: Massach-setts Inst of Tech Cambridge Dept of Aeronautics and Astronautics, 2010 [7] 吕 良等.汽车电气系统 MEMS 传感器可靠性设计研究.电气应用, 2007, 26(8): 061-065Lv Liang,et al.The Research on Reliability of MEMS Sensors Used in Automotive Electric Systems.Electrotechnical Applica-tion, 2007, 26(8): 061-065 (in Chinese) [8] 丁晓力, 王仕兵.飞机刹车系统中 LVDT 的可靠性设计.航空制造技术, 2009,(4): 090-093Ding Xiaoli,Wang Shibing.Reliability Design Principle of LVDT in Aircraft Braking System.Aeronautical Manufacturing Tech-nology, 2009,(4): 090-093 (in Chinese) [9] Irfan K aym az.A Response Surface Method Based on Weighted Regression for Structural Reliability Analysis.Probability Engi-neering Mechanics, 2005, 20(1): 11-17 [10] Bowling Alan P.Reliability-Based Design Optimization of Robotic System Dynamic Performance.Journal of Mechanical Design,
Transactions of the ASME, 2007, 129(4): 449-454 [11] Burton S,Hajela P.A Variable-Complexity Approach to Second-Order Reliability-Based Struct Multidiscip Opt,2003, 25(4): 237-250 [12] 张义民等.平面连杆机构运动精度可靠性灵敏度设计.工程设计学报, 2008, 15(1): 026-028Zhang Yimin,et al.Reliable Sensitivity Design for Kinematics Accuracy of Planar Linkage Mechanism.Journal of EngineeringDesign, 2008, 15(1): 026-028 (in Chinese) [13] 黄 玮, 冯蕴雯等.考虑铰链运动副间隙的机构运动可靠性分析模型.机械强度, 2007, 29(2): 264-268Huang Wei,Feng Yunwen,et al.Analytical Model of Mechanism Moving Reliability Taking Account of Kinematics Joint Gap.Journal of Mechanical Strength, 2007, 29(2): 264-268 (in Chinese) [14] 冯蕴雯等.机构避免死点卡住可靠性分析.机械强度, 2006, 28(1): 066-069Feng Yunwen,et al.Reliability Analysis for Preventing Dead-Point Seizure of Mechanism.Journal of Mechanical Strength,2006, 28(1): 066-069 (in Chinese) [15] 黄 玮.机构可靠性分析方法研究: [硕士学位论文].西安: 西北工业大学, 2005Huang Wei.Research on Mechanism Reliability Analysis Method.Master Degree Dissertation.Xi'an: Northwestern Polytechni-cal University, 2005 (in Chinese) |
|
|
|
相关文献: |
|
|
1.卢健, 徐德民, 张福斌.共同观测环境多UUV协同导航[J]. 西北工业大学, 2013,31(3): 378-385 |
|
|
2.于晓洲, 周军, 朱林妤.低热层大气探测立方星翱翔一号轨道寿命分析[J]. 西北工业大学, 2013,31(6): 896-900 |
|
|
3.梁红, 张恒.空时欠采样下多目标频率和方位联合估计新方法[J]. 西北工业大学, 2012,30(5): 694-698 |
|
|
4.谭雁英, 孙波, 祝小平, 周洲.无人机自主飞行任务管理器规则集的Petri网建模与验证[J]. 西北工业大学, 2012,30(6): 862-867 |
|
|
|
|
|
|