留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

直线电机进给系统轮廓误差预测控制方法及仿真研究

杨泽青 刘奇 薄敬东 刘丽冰 魏强

杨泽青,刘奇,薄敬东, 等. 直线电机进给系统轮廓误差预测控制方法及仿真研究[J]. 机械科学与技术,2023,42(3):415-425 doi: 10.13433/j.cnki.1003-8728.20200567
引用本文: 杨泽青,刘奇,薄敬东, 等. 直线电机进给系统轮廓误差预测控制方法及仿真研究[J]. 机械科学与技术,2023,42(3):415-425 doi: 10.13433/j.cnki.1003-8728.20200567
YANG Zeqing, LIU Qi, BO Jingdong, LIU Libing, WEI Qiang. Contour Error Predictive Control Methodology and Simulation of Linear Motor Feeding System[J]. Mechanical Science and Technology for Aerospace Engineering, 2023, 42(3): 415-425. doi: 10.13433/j.cnki.1003-8728.20200567
Citation: YANG Zeqing, LIU Qi, BO Jingdong, LIU Libing, WEI Qiang. Contour Error Predictive Control Methodology and Simulation of Linear Motor Feeding System[J]. Mechanical Science and Technology for Aerospace Engineering, 2023, 42(3): 415-425. doi: 10.13433/j.cnki.1003-8728.20200567

直线电机进给系统轮廓误差预测控制方法及仿真研究

doi: 10.13433/j.cnki.1003-8728.20200567
基金项目: 国家自然科学基金项目(52175461)、天津市智能制造专项(20201199)、河北省自然科学基金和重点基础研究专项项目(E2017202294)及天津市自然科学基金项目(16JCYBJC19100)
详细信息
    作者简介:

    杨泽青(1982−),副教授,博士,研究方向为高精度数控机床特性测试与控制,视觉缺陷检测与分类识别,yzq82@163.com

    通讯作者:

    薄敬东,讲师,博士研究生,bojingdong@163.com

  • 中图分类号: TG502.1

Contour Error Predictive Control Methodology and Simulation of Linear Motor Feeding System

  • 摘要: 为提高永磁同步直线电机驱动的进给系统轮廓轨迹跟踪精度和系统的动态性能,提出了一种显式模型预测交叉耦合控制方法(Explicit model predictive cross-coupled control, EMPCCC)。该方法结合显式预测控制原理与交叉耦合控制思想,对单轴电流和速度信号进行多步预测,将轮廓误差作为反馈量来修正预测控制的给定轨迹,达到轮廓误差预测控制的目的。基于MATLAB/Simulink搭建仿真模型,结果表明,所提EMPCCC方法能快速实现不同转速波形的无超调跟踪控制,且可以实时估计并补偿轮廓误差,提升不同轨迹的轮廓精度。
  • 图  1  典型轨迹轮廓误差模型示意图

    图  2  多点圆近似法自由曲线轮廓误差估计模型

    图  3  显式模型预测交叉耦合控制系统框图

    图  4  显式速度-电流预测模型图

    图  5  单轴PID级联控制仿真模型图

    图  6  单轴显式速度-电流预测控制仿真模型图

    图  7  单轴PID级联控制方法阶跃响应

    图  8  单轴显式速度-电流预测控制方法阶跃响应

    图  9  单轴PID级联控制方法三角波信号响应

    图  10  单轴显式速度-电流预测控制方法三角波信号响应

    图  11  EMPCCC控制仿真模型图

    图  12  圆轨迹EMPCCC方法与PID方法对比图

    图  13  圆轨迹放大对比图

    图  14  圆轨迹轮廓误差图

    图  15  自由轨迹EMPCCC方法与PID方法对比图

    图  16  自由轨迹放大对比图

    图  17  自由轨迹轮廓误差图

    表  1  永磁同步直线电机参数

    电机参数数值
    相电阻Rs 4.7
    交轴、直轴电感LdLq / mH 34
    电机粘性阻尼系数B/(N·s·m−1 0.035 14
    永磁体磁链ψf / Wb 0.308 79
    转动惯量J /10−4 (kg·m2) 2.64
    负载转矩TL /10−2 (N·m) 4.536 7
    下载: 导出CSV
  • [1] 杨晓君, 赵万华, 刘辉, 等. 直线电机进给系统机械系统动态特性研究[J]. 西安交通大学学报, 2013, 47(4): 44-50.

    YANG X J, ZHAO W H, LIU H, et al. Dynamic characteristics of mechanical system in linear motor feed system[J]. Journal of Xi'an Jiaotong University, 2013, 47(4): 44-50. (in Chinese)
    [2] LIU C, WU J H, LIU J, et al. High acceleration motion control based on a time-domain identification method and the disturbance observer[J]. Mechatronics, 2014, 24(6): 672-678. doi: 10.1016/j.mechatronics.2014.01.001
    [3] BOLDER J, OOMEN T. Rational basis functions in iterative learning control-with experimental verification on a motion system[J]. IEEE Transactions on Control Systems Technology, 2015, 23(2): 722-729. doi: 10.1109/TCST.2014.2327578
    [4] 徐鸣飞, 胡敏强, 余海涛, 等. 基于复合模糊控制和ZPETC的无铁心直线电机控制器的仿真研究[J]. 微电机, 2015, 48(7): 38-42.

    XU M F, HU M Q, YU H T, et al. Simulation research of coreless linear motor controller based on composite fuzzy control and ZPETC[J]. Micromotors, 2015, 48(7): 38-42. (in Chinese)
    [5] 杨红, 李生明. 高精度定位系统的摩擦力自适应前馈补偿[J]. 电气传动, 2021, 51(4): 22-26.

    YANG H, LI S M. Friction adaptive feedforward compensation for high precision positioning system[J]. Electric Drive, 2021, 51(4): 22-26. (in Chinese)
    [6] KOREN Y. Cross-coupled biaxial computer control for manufacturing systems[J]. Journal of Dynamic Systems, Measurement, and Control, 1980, 102(4): 265-272. doi: 10.1115/1.3149612
    [7] KOREN Y, LO C C. Variable-gain cross-coupling controller for contouring[J]. CIRP Annals, 1991, 40(1): 371-374. doi: 10.1016/S0007-8506(07)62009-5
    [8] SHIH Y T, CHEN C S, LEE A C. A novel cross-coupling control design for Bi-axis motion[J]. International Journal of Machine Tools and Manufacture, 2002, 42(14): 1539-1548. doi: 10.1016/S0890-6955(02)00109-8
    [9] YEH S S, HSU P L. Estimation of the contouring error vector for the cross-coupled control design[J]. IEEE/ASME Transactions on Mechatronics, 2002, 7(1): 44-51. doi: 10.1109/3516.990886
    [10] 李培新, 马跃, 于东, 等. 一种实时轮廓误差估算方法[J]. 中国机械工程, 2011, 22(4): 419-423.

    LI P X, MA Y, YU D, et al. A method of real-time estimation of contouring errors[J]. China Mechanical Engineering, 2011, 22(4): 419-423. (in Chinese)
    [11] CHIU G T C, TOMIZUKA M. Contouring control of machine tool feed drive systems: a task coordinate frame approach[J]. IEEE Transactions on Control Systems Technology, 2001, 9(1): 130-139. doi: 10.1109/87.896754
    [12] YAO B, HU C X, WANG Q F. An orthogonal global task coordinate frame for contouring control of biaxial systems[J]. IEEE/ASME Transactions on Mechatronics, 2012, 17(4): 622-634. doi: 10.1109/TMECH.2011.2111377
    [13] 李祥飞, 赵欢, 赵鑫, 等. 面向伺服动态特性匹配的轮廓误差补偿控制研究[J]. 机械工程学报, 2017, 53(1): 150-156.

    LI X F, ZHAO H, ZHAO X, et al. Research on contour error compensation method with matched servo dynamic characteristics[J]. Journal of Mechanical Engineering, 2017, 53(1): 150-156. (in Chinese)
    [14] EL KHALICK M A, UCHIYAMA N. Estimation of tool orientation contour errors for five-axismachining[J]. Robotics and Computer-Integrated Manufacturing, 2013, 29(5): 271-277. doi: 10.1016/j.rcim.2013.01.002
    [15] 喻曦, 赵欢, 李祥飞, 等. 基于双深度神经网络的轮廓误差补偿策略研究[J]. 机械工程学报, 2019, 55(3): 130-137. doi: 10.3901/JME.2019.03.130

    YU X, ZHAO H, LI X F, et al. Research on contouring error compensation method using dual deep neural networks[J]. Journal of Mechanical Engineering, 2019, 55(3): 130-137. (in Chinese) doi: 10.3901/JME.2019.03.130
    [16] 汪昕杨, 刘亚超, 钟永彬, 等. 基于自校正自抗扰控制的多电机协同系统[J]. 组合机床与自动化加工技术, 2021(2): 77-81.

    WANG X Y, LIU Y C, ZHONG Y B, et al. Multi-motor coordinated system based on self-correction active disturbance rejection control[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2021(2): 77-81. (in Chinese)
    [17] 金昊, 丁曙光. 基于GA优化RBF网络的永磁同步电机无位置控制[J]. 组合机床与自动化加工技术, 2021(2): 95-98.

    JIN H, DING S G. Sensorless control of permanent magnet synchronous motor based on RBF neural network with genetic algorithm optimization[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2021(2): 95-98. (in Chinese)
    [18] HUO F, XI X C, POO A N. Generalized Taylor series expansion for free-form two-dimensional contour error compensation[J]. International Journal of Machine Tools and Manufacture, 2012, 53(1): 91-99. doi: 10.1016/j.ijmachtools.2011.10.001
    [19] MCNAB R J, TSAO T C. Receding time horizon linear quadratic optimal control for multi-axis contour tracking motion control[J]. Journal of Dynamic Systems, Measurement, and Control, 2000, 122(2): 375-381. doi: 10.1115/1.482476
    [20] MOGHADAM H Z, LANDERS R G, BALAKRISHNAN S N. Hierarchical optimal contour control of motion systems[J]. Mechatronics, 2014, 24(2): 98-107. doi: 10.1016/j.mechatronics.2013.12.007
    [21] 刘旭东, 李珂, 张奇, 等. 基于非线性扰动观测器的永磁同步电机单环预测控制[J]. 中国电机工程学报, 2018, 38(7): 2153-2162.

    LIU X D, LI K, ZHANG Q, et al. Single-loop predictive control of PMSM based on nonlinear disturbance observers[J]. Proceedings of the CSEE, 2018, 38(7): 2153-2162. (in Chinese)
    [22] 贾成禹, 王旭东, 周凯. 基于扰动观测器的PMSM模型预测电流控制[J]. 电力电子技术, 2019, 53(10): 23-25 + 95.

    JIA C Y, WANG X D, ZHOU K. Model predictive current control of PMSM based on disturbance observer[J]. Power Electronics, 2019, 53(10): 23-25 + 95. (in Chinese)
    [23] 王岩强. 永磁同步电机模型预测控制技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2017

    WANG Y Q. Research on model predictive control technology of PMSM[D]. Harbin: Harbin Institute of Technology, 2017. (in Chinese)
  • 加载中
图(17) / 表(1)
计量
  • 文章访问数:  150
  • HTML全文浏览量:  148
  • PDF下载量:  23
  • 被引次数: 0
出版历程
  • 收稿日期:  2021-01-05
  • 刊出日期:  2023-03-25

目录

    /

    返回文章
    返回