[1]
|
Zein I, Hutmacher D W, Tan K C, et al. Fused deposition modeling of novel scaffold architectures for tissue engineering applications[J]. Biomaterials, 2002, 23(4):1169-1185 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=237683fab8d3b4c48d97be3c79ae67bc
|
[2]
|
姜涛, 程筱胜, 崔海华, 等.3D打印相关技术的发展现状[J].机床与液压, 2018, 46(3):154-160, 146 http://d.old.wanfangdata.com.cn/Periodical/jcyyy201803038Jiang T, Cheng X S, Cui H H, et al. Development status of 3D printing technology[J]. Machine Tool & Hydraulics, 2018, 46(3):154-160, 146(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jcyyy201803038
|
[3]
|
肖建华, 高延峰, 陈思维, 等.基于塑料微挤出成型的熔融沉积成型技术表面粗糙度研究进展[J].高分子材料科学与工程, 2017, 33(4):160-167 http://d.old.wanfangdata.com.cn/Periodical/gfzclkxygc201704028Xiao J H, Gao Y F, Chen S W, et al. Surface roughness of fused deposition modeling based on micro-extrusion:a review[J]. Polymer Materials Science and Engineering, 2017, 33(4):160-167(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/gfzclkxygc201704028
|
[4]
|
陆星宇, 樊黎霞, 丁骁垚.结合熵权TOPSIS的FDM成型工艺参数多目标优化研究[J].机械科学与技术, 2017, 36(11):1715-1721 doi: 10.13433/j.cnki.1003-8728.2017.1113Lu X Y, Fan L X, Ding X Y. Multi objective optimization of processing parameters in FDM based on entropy-weight TOPSIS model[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(11):1715-1721(in Chinese) doi: 10.13433/j.cnki.1003-8728.2017.1113
|
[5]
|
孙春华.FDM成形件精度预测模型的建立[J].机械科学与技术, 2010, 29(3):399-403 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jxkxyjs201003026Sun C H. A model for predicting the precision of an FDM rapid prototype[J]. Mechanical Science and Technology for Aerospace Engineering, 2010, 29(3):399-403(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jxkxyjs201003026
|
[6]
|
彭安华, 王智明.基于灰关联度分析的FDM工艺参数优化研究[J].机械科学与技术, 2010, 29(5):625-629 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jxkxyjs201005015Peng A H, Wang Z M. Optimization of process parameters in Fused Deposition Modeling (FDM) based on degree of grey incidence[J]. Mechanical Science and Technology for Aerospace Engineering, 2010, 29(5):625-629(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jxkxyjs201005015
|
[7]
|
Noriega A, Blanco D, Alvarez B J, et al. Dimensional accuracy improvement of FDM square cross-section parts using artificial neural networks and an optimization algorithm[J]. The International Journal of Advanced Manufacturing Technology, 2013, 69(9-12):2301-2313 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=ced9efef80a52a6231927d4be93e7ab6
|
[8]
|
Bixby S. Feasibility study for the manufacturing of a shock absorber using 3D printing technology[D]. Sydney: University of Sydney, 2014
|
[9]
|
Li H, Taylor G, Bheemreddy V, et al. Modeling and characterization of fused deposition modeling tooling for vacuum assisted resin transfer molding process[J]. Additive Manufacturing, 2015, 7:64-72 http://cn.bing.com/academic/profile?id=77c677eeeb5fbf4210d632ec081e5a21&encoded=0&v=paper_preview&mkt=zh-cn
|
[10]
|
Boschetto A, Bottini L, Veniali F. Finishing of Fused Deposition Modeling parts by CNC machining[J]. Robotics and Computer-Integrated Manufacturing, 2016, 41:92-101 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=0a61e23787a9003ec2679c3aa9d5afb9
|
[11]
|
Zhu J Y, Chen J L, Lade Jr R K, et al. Water-based coatings for 3D printed parts[J]. Journal of Coatings Technology and Research, 2015, 12(5):889-897 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=9f18b8e3ecaf3337fc0742a21125fecb
|
[12]
|
Galantucci L M, Lavecchia F, Percoco G. Experimental study aiming to enhance the surface finish of fused deposition modeled parts[J]. CIRP Annals, 2009, 58(1):189-192 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=e1d44e49764f57b6450f11fdb52a4823
|
[13]
|
Garg A, Bhattacharya A, Batish A. On surface finish and dimensional accuracy of FDM parts after cold vapor treatment[J]. Materials and Manufacturing Processes, 2016, 31(4):522-529 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10.1080/10426914.2015.1070425
|
[14]
|
Jin Y F, Wan Y, Zhang B, et al. Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties[J]. Journal of Materials Processing Technology, 2017, 240:233-239 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=32a0065878a7485e4414cdec0f36ecd1
|
[15]
|
Lalehpour A, Barari A. Post processing for fused deposition modeling parts with acetone vapour bath[J]. IFAC-PapersOnLine, 2016, 49(31):42-48 http://cn.bing.com/academic/profile?id=887ed1741d609f592d1f982cf6cf6675&encoded=0&v=paper_preview&mkt=zh-cn
|
[16]
|
Chohan J S, Singh R, Boparai K S. Parametric optimization of fused deposition modeling and vapour smoothing processes for surface finishing of biomedical implant replicas[J]. Measurement, 2016, 94:602-613 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=068ff418a64afd54ae9c33f38141b0f0
|
[17]
|
张江涛, 胡中伟, 朱泽朋, 等.熔融沉积成形件的表面雾化抛光实验研究[J].机械科学与技术, 2017, 36(6):960-964 doi: 10.13433/j.cnki.1003-8728.2017.0623Zhang J T, Hu Z W, Zhu Z P, et al. Experimental studies on spray polishing surface of fused deposition modeling build parts[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(6):960-964(in Chinese) doi: 10.13433/j.cnki.1003-8728.2017.0623
|