留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

ELM模型水沙分离水力旋流器选型的研究

唐兆家 喻黎明 王凤花 李娜 龙俊

唐兆家, 喻黎明, 王凤花, 李娜, 龙俊. ELM模型水沙分离水力旋流器选型的研究[J]. 机械科学与技术, 2018, 37(11): 1716-1721. doi: 10.13433/j.cnki.1003-8728.20180119
引用本文: 唐兆家, 喻黎明, 王凤花, 李娜, 龙俊. ELM模型水沙分离水力旋流器选型的研究[J]. 机械科学与技术, 2018, 37(11): 1716-1721. doi: 10.13433/j.cnki.1003-8728.20180119
Tang Zhaojia, Yu Liming, Wang Fenghua, Li Na, Long Jun. Separating Water and Sand by Hydrocy-clone of ELM Model Selection[J]. Mechanical Science and Technology for Aerospace Engineering, 2018, 37(11): 1716-1721. doi: 10.13433/j.cnki.1003-8728.20180119
Citation: Tang Zhaojia, Yu Liming, Wang Fenghua, Li Na, Long Jun. Separating Water and Sand by Hydrocy-clone of ELM Model Selection[J]. Mechanical Science and Technology for Aerospace Engineering, 2018, 37(11): 1716-1721. doi: 10.13433/j.cnki.1003-8728.20180119

ELM模型水沙分离水力旋流器选型的研究

doi: 10.13433/j.cnki.1003-8728.20180119
基金项目: 

国家自然科学基金项目(51379024,51769009)资助

详细信息
    作者简介:

    唐兆家(1987-),硕士研究生,研究方向为智能农业装备的数字化设计,18087162163@163.com

    通讯作者:

    喻黎明,副教授,硕士生导师,Liming16900@sina.com

Separating Water and Sand by Hydrocy-clone of ELM Model Selection

  • 摘要: 针对水力旋流器选型困难以及经验选型很难达到最佳分离效果的问题,以6个对分离效果影响较大的因素为研究对象,取L64(89)表前6列为数据变量组,建立ELM模型并与正交的结果做对比。结果表明:ELM模型与正交实验所反映的规律一致,正交实验只能给出一组最优组合,其分离效果为63.08%,ELM预测出的分离结果有4组值都和正交实验的最优组合接近或相等,分别为63.01%、62.78%、63.02%、63.08%。因此,在生产旋流器的过程中,以ELM模型预测的多组结果作为参考,可以节约选型后制造的成本。
  • [1] 曹雨平,姜临田.水力旋流器的研究现状和发展趋势[J].工业水处理,2015,35(2):11-14 Cao Y P, Jiang L T. Research status and development trend on hydrocyclone[J]. Industrial Water Treatment, 2015,35(2):11-14(in Chinese)
    [2] Tang B, Xu Y X, Song X F, et al. Effect of inlet configuration on hydrocyclone performance[J]. Transactions of Nonferrous Metals Society of China, 2017,27(7):1645-1655
    [3] Lv F X, Zhang S Y, Hu C W. Study of structural parameters of the inlet of downhole hydrocyclones[J]. Petroleum Science, 2005,2(3):16-19
    [4] 赵立新,刘丽丽,徐磊,等.倾斜入口流道的水力旋流器数值模拟分析[J].化工机械,2012,39(2):203-205 Zhao L X, Liu L L, Xu L, et al. Numerical simulation analysis of hydrocyclone with gradient flow path[J]. Chemical Engineering & Machinery, 2012,39(2):203-205(in Chinese)
    [5] 张翠婷.探讨入口角度对水力旋流器流场的影响[J].科技与企业,2014,(24):179 Zhang C T. The influence of inlet angle on the flow field of hydrocyclone[J]. Science-Technology Enterprise, 2014,(24):179(in Chinese)
    [6] 赵立新,宋民航,蒋明虎,等.新型轴入式脱水型旋流器的入口结构模拟分析[J].石油机械,2013,41(1):68-71 Zhao L X, Song M H, Jiang M H, et al. Simulation analysis of the inlet structure of the neotype dehydrated cyclone[J]. China Petroleum Machinery, 2013,41(1):68-71(in Chinese)
    [7] 王尊策,郜冶,吕凤霞,等.液-液水力旋流器入口结构参数对压力特性的影响[J].流体机械,2003,31(2):16-19,26 Wang Z C, Gao Y, Lü F X, et al. Effect of liquid-liquid hydrocyclone's inlet structure on pressure characteristic[J]. Fluid Machinery, 2003,31(2):16-19,26(in Chinese)
    [8] 华.大锥角水力旋流器提高金的回收率[J].国外金属矿选矿,1979,(6):63-64 Hua. High-cone angle hydrocyclone to increase the recovery of gold[J]. World Mining, 1979,(6):65-66(in Chinese)
    [9] 吕一波,孟令丽.复锥式水力旋流器的结构参数对分选效果的影响[J].选煤技术,2011,(6):14-16 Lü Y B, Meng L L. Influence of the structure parameters of the conical hydrocyclone on the separation effect[J]. Coal Preparation Technology, 2011,(6):14-16(in Chinese)
    [10] 赵立新,王尊策,李枫,等.液液水力旋流器流场特性与分离特性研究(Ⅰ):锥角变化对切向速度场的影响[J].化工装备技术,1999,20(4):9-12 Zhao L X, Wang Z C, Li F, et al. Study on flow field characteristics and separation characteristics of liquid-liquid hydrocyclone(Ⅰ):influence of change cone angle on tangential velocity field[J]. Chemical Equipment Technology, 1999,20(4):9-12(in Chinese)
    [11] 何伟,赵庆国.用小锥角旋流器分离微细颗粒的试验研究[J].矿业快报,2008,24(7):28-30 He W, Zhao Q G. Experimental study of separation of fine particle by cyclone with small cone angle[J]. Express Information of Mining Industry, 2008,24(7):28-30(in Chinese)
    [12] 曾志飞.柱锥连接处扩径对水力旋流器性能的影响[J].矿冶工程,2011,31(2):42-44,48 Zeng Z F. Effect of expanding cone diameter between cylinder and cone on hydrocyclone performance[J]. Mining and Metallurgical Engineering, 2011,31(2):42-44,48(in Chinese)
    [13] 张丹,陈晔.锥角对固-液水力旋流器流场及其分离性能的影响[J].流体机械,2009,37(8):11-16 Zhang D, Chen Y. Effect of the cone angle on flow field and separation performance of solid-liquid hydrocyclones[J]. Fluid Machinery, 2009,37(8):11-16(in Chinese)
    [14] 蒋明虎,刘道友,赵立新,等.锥角对水力旋流器压力场和速度场的影响[J].化工机械,2011,38(5):572-576 Jiang M H, Liu D Y, Zhao L X, et al. Cone angle effect on hydrocyclone pressure and velocity fields[J]. Chemical Engineering & Machinery, 2011,38(5):572-576(in Chinese)
    [15] 崔瑞,王光辉,李茂林.锥体结构对水力旋流器内流场及分离性能的影响[J].矿山机械,2014,(4):83-87 Cui R, Wang G H, Li M L. Influence of conical structure on flow field and separation performance of hydrocyclone[J]. Mining & Processing Equipment, 2014,(4):83-87(in Chinese)
    [16] Dubey R K, Climent E, Banerjee C, et al. Performance monitoring of a hydrocyclone based on underflow discharge angle[J]. International Journal of Mineral Processing, 2016,154:41-52
    [17] 何利民.除油水力旋流器溢流口结构试验研究[J].化工机械,2000,27(4):193-196,237 He L M. An experimental investigation on the structure of the overflow mouth of a deoiling hydrocyclone[J]. Chemical Engineering & Machinery, 2000,27(4):193-196,237(in Chinese)
    [18] 宫振宇,张妍君,鄂承林,等.水力旋流器的底流口直径对其分离性能的影响[J].化学反应工程与工艺,2014,30(5):463-470 Gong Z Y, Zhang Y J, E C L, et al. Influence of the spigot diameter of a hydrocyclone on its separation performance[J]. Chemical Reaction Engineering and Technology, 2014,30(5):463-470(in Chinese)
    [19] 牛伟.溢流管直径对旋流器分离效率影响的数值模拟[J].化工技术与开发,2015,44(1):45-48 Niu W. Numerical simulation for influence of overflow pipe diameter on hydro cyclone separation efficiency[J]. Technology & Development of Chemical Industry, 2015,44(1):45-48(in Chinese)
    [20] 许妍霞,宋兴福,吴亚洲,等.溢流口结构对水力旋流器性能影响的模拟分析[J].华东理工大学学报(自然科学版),2012,38(3):271-276 Xu Y X, Song X F, Wu Y Z, et al. Simulation analysis of hydrocyclone with different vortex finders[J]. Journal of East China University of Science and Technology (Natural Science Edition), 2012,38(3):271-276(in Chinese)
    [21] Mokni I, Dhaouadi H, Bournot P, et al. Numerical investigation of the effect of the cylindrical height on separation performances of uniflow hydrocyclone[J]. Chemical Engineering Science, 2015,122:500-513
    [22] 刘晋玮.新型水力分级旋流器的结构设计与原理分析[J].煤矿现代化,2018,(1):29-31 Liu J W. Study on technology of cutting angle in fully mechanized mining face[J]. Coal Mine Modernization, 2018,(1):29-31(in Chinese)
    [23] 庞学诗.水力旋流器技术与应用[M].北京:中国石化出版社,2011 Pang X S. Technology and application of hydrocyclone[M]. Beijing:Sinopec Press, 2011(in Chinese)
    [24] 喻黎明,严为光,龚道枝,等.基于ELM模型的浅层地下水位埋深时空分布预测[J].农业机械学报,2017,48(2):215-223 Yu L M, Yan W G, Gong D Z, et al. Temporal and spatial distribution prediction of shallow groundwater level based on ELM model[J]. Transactions of The Chinese Society of Agricultural Machinery, 2017,48(2):215-223(in Chinese)
  • 加载中
计量
  • 文章访问数:  309
  • HTML全文浏览量:  58
  • PDF下载量:  63
  • 被引次数: 0
出版历程
  • 收稿日期:  2017-12-26
  • 刊出日期:  2018-11-05

目录

    /

    返回文章
    返回