面向电弧放电加工的旋转冲液夹具模态分析及结构优化研究

王庆; 谢习华; 张立斌

doi:10.13433/j.cnki.1003-8728.20180003

面向电弧放电加工的旋转冲液夹具模态分析及结构优化研究

doi: 10.13433/j.cnki.1003-8728.20180003

1.
中南大学机电工程学院高性能复杂制造国家重点实验室, 长沙 410083;
2.
中国科学院深圳先进技术研究院, 广东深圳 518055

基金项目:

广东省深圳市基础研究学科布局项目（JCYJ20150925163026555）资助

详细信息

作者简介:
王庆(1991-),硕士研究生,研究方向为机械设计,特种加工,qing.wangchn@gmail.com

通讯作者:
谢习华,副教授,博士,xxh_zh@csu.edu.cn

计量
- 文章访问数: 161
- HTML全文浏览量: 21
- PDF下载量: 13
- 被引次数: 0
出版历程
- 收稿日期: 2017-05-05
- 刊出日期: 2018-07-05

Modal Analysis and Structural Optimization of Rotary Flushing Fixture for Arc Discharge Machining

1.
Mechanical and Electrical Institute, State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China;
2.
Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Guangdong Shenzhen 518055, China

摘要

摘要: 根据电弧放电加工过程利用高速冲液流场对电弧进行有效控制的工作原理，设计了一套用于实现高速内冲液功能的旋转冲液夹具。旋转冲液夹具的动态特性对电弧放电加工的加工性能具有明显影响，因此，采用ANSYS有限元分析软件对冲液夹具进行模态仿真分析。仿真结果表明，冲液夹具在工作时会出现沿某些方向的剧烈振动，导致弹性部件发生较大的变形。分析仿真结果可知，通过改进材料属性和几何模型，可以减小弹性部件的振动变形，最终实现旋转冲液夹具的结构优化。
- 电弧放电加工 /
- 旋转冲液夹具 /
- 动态特性 /
- 模态分析 /
- 结构优化
Abstract: Based on the theory of arcing controlling with the high-speed inner flushing flow fluid forming while machining, the rotary flushing fixture is designed. Furthermore, the dynamic characteristics of the rotary flushing fixture have the significant effect on the machining performance of the arc discharge machining. Therefore, the modal simulation analysis is conducted to explore the vibrant performance of the flushing fixture by a finite element analysis software ANSYS. The simulation results show that the vibration in some directions of the flushing rotary fixture would occur violently while machining, which results in large elastically deformation parts. The simulation analysis results show that the deformation of the elastic parts could be decreased by adopting the different material properties and geometric model, from which the structure optimization of the rotary flushing fixture could be realized.
- arc discharge machining /
- rotary flushing fixture /
- dynamic characteristics /
- modal analysis /
- structural optimization.

HTML全文

参考文献(14)

[1]	邱明波,俞晓春.高效放电加工技术研究现状[J].航空制造技术,2017,60(3):46-55 Qiu M B, Yu X C. Research status of high efficiency discharge machining technology[J]. Aeronautical Manufacturing Technology, 2017,60(3):46-55(in Chinese)
[2]	Coldwell H, Woods R, Paul M, et al. Rapid machining of hardened AISI H13 and D2 moulds, dies and press tools[J]. Journal of Materials Processing Technology, 2003,135(2-3):301-311
[3]	Meshcheriakov G, Nosulenko V, Meshcheriakov N, et al. Physical and technological control of arc dimensional machining[J]. CIRP Annals, 1988,37(1):209-212
[4]	叶良才.放电机械磨削联合加工方法及设备:中国,CN87106421A[P].1988-05-18 Ye L C. Discharge/mechanical-grind combined fabrication method and its equipment:CN, CN87106421A[P]. 1988-05-18(in Chinese)
[5]	洪汉,顾琳,徐辉,等.侧铣式高速电弧放电加工的极间流场仿真及加工试验[J].机械工程学报,2015,51(9):176-183 Hong H, Gu L, Xu H, et al. Flow field simulation and machining experiment of flank milling blasting erosion arc machining[J]. Journal of Mechanical Engineering, 2015,51(9):176-183(in Chinese)
[6]	周碧胜,周碧海.短电弧切削技术[C]//2007年中国机械工程学会年会之第12届全国特种加工学术会议论文集.长沙:中国机械工程学会特种加工分会,2007 Zhou B S, Zhou B H. Short electric arc cutting technique[C]//Chinese Mechanical Engineering Society Annual Conference. Changsha:Special Processing Branch of the Chinese Society of Mechanical Engineering 2007(in Chinese)
[7]	周碧胜,梁楚华,周建平,等.短电弧切削技术的机理研究[C]//2009中国绿色制造新年论坛论文集.北京:中国机械工程学会,中国自动化学会,2009 Zhou B S, Liang C H, Zhou J P, et al. Study on Mechanism of short arc cutting technology[C]//2009 China Green Manufacturing New Year Forum. Beijing:China Society of Mechanical Engineering, China Automation Society, 2009(in Chinese)
[8]	王用贤.直流运动电弧铣削加工系统构建与工艺实验[D].北京:清华大学,2009 Wang Y X. Moving electric arc milling system development and machining experiment[D]. Beijing:Tsinghua University, 2009(in Chinese)
[9]	Zhao W S, Xu H, Gu L, et al. Influence of polarity on the performance of Blasting Erosion Arc Machining[J]. CIRP Annals, 2015,64(1):213-216
[10]	Gu L, Li L, Zhao W S, et al. An efficient and economical rapid-tooling method for die-sinking electrical discharge machining[J]. Journal of Manufacturing Science and Engineering, 2011,133(5):051004
[11]	张敏,张勤河,朱光,等.振动辅助电弧铣削加工技术实验研究[J].电加工与模具,2016,(3):6-10 Zhang M, Zhang Q H, Zhu G, et al. Experimental study on vibration assisted electro-arc milling technology[J]. Electromachining & Mould, 2016,(3):6-10(in Chinese)
[12]	丁欣硕,凌桂龙.ANSYS Workbench 14.5有限元分析案例详解[M].北京:清华大学出版社,2014:172-196 Ding X S, Ling G L. ANSYS Workbench finite element analysis case[M]. Beijing:Tsinghua University Press, 2014:172-196(in Chinese)
[13]	张朝辉.ANSYS 12.0结构分析工程应用实例解析[M].3版.北京:机械工业出版社,2010 Zhang C H. ANSYS12. 0 Analysis of engineering application of structural analysis[M]. 3rd ed. Beijing:Machinery Industry Press, 2010(in Chinese)
[14]	曾攀,雷丽萍,方刚.基于ANSYS平台有限元分析手册:结构的建模与分析[M].北京:机械工业出版社,2011:134-154 Zeng P, Lei L P, Fang G. Finite element analysis guide:modeling and analysis of structure[M]. Beijing:Machinery Industry Press, 2011:134-154(in Chinese)