留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

磨粒排布对加压内冷却砂轮磨削性能的影响

彭锐涛 李仲平 唐新姿 周专

彭锐涛, 李仲平, 唐新姿, 周专. 磨粒排布对加压内冷却砂轮磨削性能的影响[J]. 机械科学与技术, 2018, 37(4): 586-591. doi: 10.13433/j.cnki.1003-8728.2018.0415
引用本文: 彭锐涛, 李仲平, 唐新姿, 周专. 磨粒排布对加压内冷却砂轮磨削性能的影响[J]. 机械科学与技术, 2018, 37(4): 586-591. doi: 10.13433/j.cnki.1003-8728.2018.0415
Peng Ruitao, Li Zhongping, Tang Xinzi, Zhou Zhuan. Effect of Abrasive Arraying Forms on the Grinding Performance of a Pressurized Internal-cooling Grinding Wheel[J]. Mechanical Science and Technology for Aerospace Engineering, 2018, 37(4): 586-591. doi: 10.13433/j.cnki.1003-8728.2018.0415
Citation: Peng Ruitao, Li Zhongping, Tang Xinzi, Zhou Zhuan. Effect of Abrasive Arraying Forms on the Grinding Performance of a Pressurized Internal-cooling Grinding Wheel[J]. Mechanical Science and Technology for Aerospace Engineering, 2018, 37(4): 586-591. doi: 10.13433/j.cnki.1003-8728.2018.0415

磨粒排布对加压内冷却砂轮磨削性能的影响

doi: 10.13433/j.cnki.1003-8728.2018.0415
基金项目: 

国家自然科学基金项目(51475404)与湖南省自然科学基金项目(2018JJ4082)资助

详细信息
    作者简介:

    彭锐涛(1982-),教授,博士生导师,研究方向为难加工材料的高效加工,pengruitao@163.com

Effect of Abrasive Arraying Forms on the Grinding Performance of a Pressurized Internal-cooling Grinding Wheel

  • 摘要: 考虑磨粒排布方式对砂轮磨削效率和性能有重要影响,设计制备磨粒无序和有序排布的加压内冷却砂轮,利用砂轮表面形貌检测和图像识别技术,建立砂轮磨削GH4169高温合金的三维有限元模型。采用不同磨粒排布的砂轮开展磨削GH4169高温合金的实验研究,对比分析磨削力、磨削温度、加工表面粗糙度以及表面微观形貌,研究磨粒无序和有序两种排布方式对砂轮磨削性能的影响。结果表明:对于加压内冷却砂轮而言,相对磨粒无序排布,磨粒有序排布方式能获得更优良的加工表面质量,磨削力、磨削温度和表面粗糙度均降低,且工件表面形貌更加规则完整。
  • [1] Thakur A, Gangopadhyay S. State-of-the-art in surface integrity in machining of nickel-based super alloys[J]. International Journal of Machine Tools and Manufacture, 2016,100:25-54
    [2] Klocke F, Zeis M, Klink A, et al. Technological and economical comparison of roughing strategies via milling, sinking-EDM, wire-EDM and ECM for titanium-and nickel-based blisks[J]. CIRP Journal of Manufacturing Science and Technology, 2013,6(3):198-203
    [3] Klocke F, Zeis M, Klink A, et al. Experimental research on the electrochemical machining of modern titanium-and nickel-based alloys for aero engine components[J]. Procedia CIRP, 2013,6:368-372
    [4] Lyu Y S, Yu H Y, Wang J, et al. Study on the grinding temperature of the grinding wheel with an abrasive phyllotactic pattern[J]. The International Journal of Advanced Manufacturing Technology, 2017,91(1-4):895-906
    [5] Yu H Y, Wang J, Lu Y S. Simulation of grinding surface roughness using the grinding wheel with an abrasive phyllotactic pattern[J]. The International Journal of Advanced Manufacturing Technology, 2016,84(5-8):861-871
    [6] Aurich J C, Herzenstiel P, Sudermann H, et al. High-performance dry grinding using a grinding wheel with a defined grain pattern[J]. CIRP Annals, 2008,57(1):357-362
    [7] 陈建毅,黄辉,徐西鹏.钎焊超硬磨料工具的研究进展[J].工具技术,2007,41(2):9-14 Chen J Y, Huang H, Xu X P. Progress of study on brazed superabrasive tools[J]. Tool Engineering, 2007,41(2):9-14(in Chinese)
    [8] Yang Z B, Zhang M J, Zhang Z, et al. A study on diamond grinding wheels with regular grain distribution using additive manufacturing (AM) technology[J]. Materials & Design, 2016,104:292-297
    [9] Ding W F, Xu J H, Chen Z Z, et al. Grindability and surface integrity of cast nickel-based superalloy in creep feed grinding with brazed CBN abrasive wheels[J]. Chinese Journal of Aeronautics, 2010,23(4):501-510
    [10] Pinto F W, Vargas G E, Wegener K. Simulation for optimizing grain pattern on engineered grinding tools[J]. CIRP Annals, 2008,57(1):353-356
    [11] Zhou C, Deng H, Chen G Y, et al. Study of the grinding performance of laser-trued and dressed bronzed-bonded diamond grinding wheels[J]. The International Journal of Advanced Manufacturing Technology, 2016,85(9-12):2797-2803
    [12] Oliveira J F G, Bottene A C, Franca T V. A novel dressing technique for texturing of ground surfaces[J]. CIRP Annals, 2010,59(1):361-364
    [13] Koshy P, Iwasald A, Elbestawl M A. Surface generation with engineered diamond grinding wheels:insights from simulation[J]. CIRP Annals, 2003,52(1):271-274
    [14] 王军,赵良兵,赵成义,等.磨粒族叶序排布砂轮的铣磨实验研究[J].工具技术,2013,47(3):26-29 Wang J, Zhao L B, Zhao C Y, et al. Reseach on mill-grinding experiment of grinding wheel with phyllotactic pattern[J]. Tool Engineering, 2013,47(3):26-29(in Chinese)
    [15] 彭锐涛,唐恒,唐新姿,等.一种内冷却磨削砂轮:中国,CN201410197728.8[P].2014-05-07 Peng R T, Tang H, Tang X Z, et al. Internal cooling grinding wheel:China, CN201410197728.8[P]. 2014-05-07(in Chinese)
    [16] Aurich J C, Braun O, Warnecke G, et al. Development of a superabrasive grinding wheel with defined grain structure using kinematic simulation[J]. CIRP Annals, 2003, 52(1):275-280
    [17] 韩晓军.数字图像处理技术与应用[M].北京:电子工业出版社,2009 Han X J. Digital image processing technology and application[M]. Beijing:Electronics Industry Press, 2009(in Chinese)
    [18] Xie J, Tang Y, Tamaki J. A study on surface generation of metal-bonded diamond grinding wheel dressed by electro-contact discharge[J]. Key Engineering Materials, 2006,304-305:76-80
    [19] 傅玉灿,田霖,徐九华,等.磨削过程建模与仿真研究现状[J].机械工程学报,2015,51(7):197-205 Fu Y C, Tian L, Xu J H, et al. Development and application on the grinding process modeling and simulation[J]. Journal of Mechanical Engineering, 2015,51(7):197-205(in Chinese)
    [20] Courbon C, Sajn V, Kramar D, et al. Investigation of machining performance in high pressure jet assisted turning of inconel 718:a numerical model[J]. Journal of Materials Processing Technology, 2011,211(11):1834-1851
  • 加载中
计量
  • 文章访问数:  194
  • HTML全文浏览量:  28
  • PDF下载量:  9
  • 被引次数: 0
出版历程
  • 收稿日期:  2017-03-17
  • 刊出日期:  2018-04-05

目录

    /

    返回文章
    返回