留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

调频调幅轴向花键挤压试验研究

马鹏举 许志永 程向 刘勇 郑学著 田洁 王聚存

马鹏举, 许志永, 程向, 刘勇, 郑学著, 田洁, 王聚存. 调频调幅轴向花键挤压试验研究[J]. 机械科学与技术, 2018, 37(2): 258-262. doi: 10.13433/j.cnki.1003-8728.2018.0215
引用本文: 马鹏举, 许志永, 程向, 刘勇, 郑学著, 田洁, 王聚存. 调频调幅轴向花键挤压试验研究[J]. 机械科学与技术, 2018, 37(2): 258-262. doi: 10.13433/j.cnki.1003-8728.2018.0215
Ma Pengju, Xu Zhiyong, Cheng Xiang, Liu Yong, Zheng Xuezhu, Tian Jie, Wang Jucun. Investigation of Axial Spline Extrusion with Frequency and Amplitude Modulation[J]. Mechanical Science and Technology for Aerospace Engineering, 2018, 37(2): 258-262. doi: 10.13433/j.cnki.1003-8728.2018.0215
Citation: Ma Pengju, Xu Zhiyong, Cheng Xiang, Liu Yong, Zheng Xuezhu, Tian Jie, Wang Jucun. Investigation of Axial Spline Extrusion with Frequency and Amplitude Modulation[J]. Mechanical Science and Technology for Aerospace Engineering, 2018, 37(2): 258-262. doi: 10.13433/j.cnki.1003-8728.2018.0215

调频调幅轴向花键挤压试验研究

doi: 10.13433/j.cnki.1003-8728.2018.0215
基金项目: 

高档数控机床与基础制造装备科技重大专项项目(2014ZX04001021)资助

详细信息
    作者简介:

    马鹏举(1961-),副教授,博士,研究方向为先进制造技术,旋转锻造、金属挤压成形,07931@buaa.edu.cn

Investigation of Axial Spline Extrusion with Frequency and Amplitude Modulation

  • 摘要: 花键类零件在动力传动机构中应用广泛,承载能力大,导向性好,定心精度高。常用加工方式主要是切削加工工艺和挤压、滚压的无切削加工工艺,受工艺方法的限制,在薄壁零件外花键加工中,极易造成工件变形,无法满足加工精度要求,特别是在航空难加工材料薄壁细长轴内外花键成形中,由于高温合金材料加工工艺性差,切削力大,是加工的一个难点。调频调幅轴向振动挤压成形加工工艺在加工过程中,模具挤压时附加振动,可有效降低挤压变形抗力,改善加工精度。研究振动挤压过程中的工艺参数,与传统工艺进行对比,同时得到各个工艺参数对加工工艺的定性关系,为优化振动挤压工艺参数和机床调整提供理论依据。进行了调频调幅轴向挤压主要工艺参数的测量试验,得到了调频调幅振动挤压的工艺参数并进行了分析研究,对薄壁细长轴外花键振动挤压成形工艺设计有重要的指导意义。
  • [1] 杨煜.国内外冷挤压技术发展综述[J].锻压机械,2001,36(3):3-5,1 Yang Y. Review of development of cold extrusion domestic and abroad[J]. Metalforming Machinery, 2001,36(3):3-5,1(in Chinese)
    [2] 赵玉民,杨金娥,彭巍.花键管挤压成形研究[J].机械制造,2006,44(7):41-42 Zhao Y M, Yang J E, Peng W. Research on extrusion forming of spline tube[J]. Machinery, 2006,44(7):41-42(in Chinese)
    [3] 刘志奇,宋建丽,李永堂,等.渐开线花键冷滚压精密成形工艺分析及试验研究[J].机械工程学报,2011,47(14):32-38 Liu Z Q, Song J L, Li Y T, et al. Analysis and experimental study on the precision cold rolling process of involute spline[J]. Journal of Mechanical Engineering, 2011,47(14):32-38(in Chinese)
    [4] 杨庆华,陈鑫,孟彬,等.汽车活塞销振动挤压数值模拟分析[J].浙江工业大学学报,2013,41(3):317-320 Yang Q, Chen X, Meng B, et al. Numerical simulation for vibration extrusion of automotive car piston pins[J]. Journal of Zhejiang University of Technology, 2013,41(3):317-320(in Chinese)
    [5] 栾谦聪,董湘怀,吴云剑.径向锻造工艺参数对锻透性的影响[J].中国机械工程,2014,25(22):3098-3103 Luan Q C, Dong X H, Wu Y J. Effects of process parameters on FPE in radial forging processes[J]. Journal of China Mechanical Engineering, 2014,25(22):3098-3103(in Chinese)
    [6] 梁瑜轩,黎向锋,左敦稳,等.内螺纹低频振动冷挤压试验研究[J].航空学报,2013,34(2):442-450 Liang Y X, Li F X, Zuo D W, et al. Experimental research on internal thread formation by cold extrusion based on low frequency vibration[J]. Acta Aeronautica et Astronautica Sinica, 2013,34(2):442-450(in Chinese)
    [7] Zhang Z C, Li J, Zhou L H, et al. Experimental study on open-die cold extrusion forming technique for involutespline shafts[J]. Chinese Journal of Mechanical Engineering (English Edition), 1996,9(1):6-12
    [8] 李泳峄,赵升吨.花键轴增量式滚轧成形坯料直径计算及有限元分析[J].锻压技术,2013,38(1):61-65 Li Y Y, Zhao S D. Diameter calculation of billet before incremental rolling for spline shaft and finite element analysis[J]. Forging & Stamping Technology, 2013,38(1):61-65(in Chinese)
    [9] Hu X H, Yang Q H, Wang Z H, et al. Influence of electric-hydraulic chattering on forward extrusion process[J]. The International Journal of Advanced Manufacturing Technology, 2016,82(9-12):1475-1484
    [10] Vollertsen F, Hu Z, Niehoff H S, et al. State of the art in micro forming and investigations into micro deep drawing[J]. Journal of Materials Processing Technology, 2004,151(1-3):70-79
    [11] Chang Y M. The study of size effect and ultrasonic assisted in micro foil forming processes[D]. 2012
    [12] Presz W, Andersen B. Flexible tooling for vibration-assisted microforming[J]. Journal of Achievements in Materials and Manufacturing Engineering, 2007,21(2):61-64
    [13] Mousavi S A A A, Feizi H, Madoliat R. Investigations on the effects of ultrasonic vibrations in the extrusion process[J]. Journal of Materials Processing Technology, 2007,187-188:657-661
    [14] 张琦,贲宁宇,王聚存,等.花键轴振动挤压成形试验研究[J].西安交通大学学报,2015,49(11):110-115 Zhang Q, Ben N Y, Wang J C, et al. Experimental research on oscillating extrusion of splined shaft[J]. Journal of Xi'an Jiaotong University, 2015,49(11):110-115(in Chinese)
    [15] Bunget C, Ngaile G. Influence of ultrasonic vibration on micro-extrusion[J]. Ultrasonics, 2011,51(5):606-616
  • 加载中
计量
  • 文章访问数:  187
  • HTML全文浏览量:  28
  • PDF下载量:  4
  • 被引次数: 0
出版历程
  • 收稿日期:  2016-11-14
  • 刊出日期:  2018-02-25

目录

    /

    返回文章
    返回