车身地板制造偏差对前轮定位参数的影响分析

刘军; 卢从坚; 刘丽娜; 王华

doi:10.13433/j.cnki.1003-8728.2017.1019

车身地板制造偏差对前轮定位参数的影响分析

doi: 10.13433/j.cnki.1003-8728.2017.1019

刘军¹,
卢从坚²,
刘丽娜²,
王华^1, ,

1.
上海交通大学上海市复杂薄板结构数字化制造重点实验室, 上海 200240;
2.
上汽通用五菱汽车股份有限公司, 广西柳州 545007

详细信息

作者简介:
刘军(1992),硕士研究生,研究方向为装配偏差、产品质量控制,1572229894@qq.com

通讯作者:
王华(联系人),副教授,博士,huawang@sjtu.edu.cn

计量
- 文章访问数: 161
- HTML全文浏览量: 21
- PDF下载量: 6
- 被引次数: 0
出版历程
- 收稿日期: 2016-06-16
- 刊出日期: 2017-10-05

Effect of Auto Parts Manufacturing Deviations to Front-wheel Positioning Parameters

Liu Jun¹,
Lu Congjian²,
Liu Lina²,
Wang Hua^{1
, ,}

1.
Shanghai Key Lab of Digital Manufacture for Thin-Walled Structures, Shanghai Jiao Tong University, Shanghai 200240, China;
2.
SAIC-GM Wuling Automobile Co., Ltd, Guangxi Liuzhou 545007, China

摘要

摘要: 汽车的前轮定位参数包括前束角，外倾角，主销内倾角，主销后倾角等。主要以某车型为对象，借助三维偏差仿真软件VSA及机械系统动力学分析软件Adams，建立底盘前悬的偏差分析模型以及机构运动学模型，分析白车身、底盘前悬零部件的制造偏差对其转向轮定位参数的影响。通过分析零部件制造偏差对转向轮定位参数的影响关系，找出了主要影响因素，对合理优化关键零部件制造偏差，控制整车制造成本，提升整车性能具有很好的指导和实践意义。
- 四轮定位参数 /
- 底盘前悬 /
- 制造偏差 /
- 偏差分析
Abstract: Four-wheel positioning parameters mainly include toe angle, camber angle, kingpin inclination angle and kingpin caster angle, etc. We chose a certain auto model as our analysis object, built the deviation analysis model and structural dynamics model of the front suspension with the help of three dimensional deviation analysis software called Teamcenter Visualization Mockup (VSA) and Automatic dynamic analysis of mechanical systems (Adams), trying to study the effect of auto parts manufacturing deviations to steering-wheel positioning parameters. The analysis results will help us find out the main influencing factors of the wheel positioning parameters, which has a good guidance and practical significance for the reasonable optimization of the key manufacturing deviations, which will bring the better control of the vehicle manufacturing cost and the improvement of vehicle performance.
- structural dynamics /
- computer software /
- three dimensional deviation analysis /
- optimization

HTML全文

参考文献(15)

[1]	李英涛.汽车四轮定位检测及调整技术的研究[D].西安:长安大学,2010 Li Y T. Study on adjustment and inspection test technology of automobile wheel alignment[D]. Xi'an:Chang'an University, 2010(in Chinese)
[2]	郭孔辉,李宁,景立新.基于转向试验的车辆主销定位参数完整解算[J].农业机械学报,2011,42(10):1-5 Guo K H, Li N, Jing L X. Calculation of vehicle kingpin positional parameters based on steering test[J]. Transactions of the Chinese Society for Agricultural Machinery, 2011,42(10):1-5(in Chinese)
[3]	管欣,逄淑一,詹军,等.基于转向几何试验的主销轴线角度和位置的解算[J].科学技术与工程,2009,9(21):6593-6595,6600 Guan X, Pang S Y, Zhan J, et al. The calculation of the angle and position of the kingpin axis based on steering geometric test[J]. Science Technology and Engineering, 2009,9(21):6593-6595,6600(in Chinese)
[4]	庄严,郭在云.基于几何关系的汽车主销倾角的测量原理[J].公路与汽运,2006,(2):13-15 Zhuang Y, Guo Z Y. Measuring principle of vehicle kingpin angle based on geometric relationship[J]. Highways & Automotive Applications, 2006,(2):13-15(in Chinese)
[5]	徐观,苏建,陈熔,等.汽车主销后倾测量模型误差分析及标定方法[J].吉林大学学报(工学版),2008,38(1):17-20 Xu G, Su J, Chen R, et al. Error analysis of measurement model and calibration method for automobile caster[J]. Journal of Jilin University (Engineering and Technology Edition), 2008,38(1):17-20(in Chinese)
[6]	李臣,司景萍.基于ADAMS/Car的麦弗逊悬架建模与仿真[J].公路与汽运,2007,(3):8-10 Li C, Si J P. Modeling and simulation of MacPherson suspension based on ADAMS/Car[J]. Highways & Automotive Applications, 2007,(3):8-10(in Chinese)
[7]	刘伟,李健,王金洋.基于ADAMS/CAR的麦弗逊式悬架的建模与仿真[J].机械,2012,39(10):62-64,70 Liu W, Li J, Wang J Y. Modeling and simulation of MacPherson suspension based on ADAMS/CAR[J]. Machinery, 2012,39(10):62-64,70(in Chinese)
[8]	雷刚.基于ADAMS的麦弗逊式悬架系统的虚拟仿真分析及其优化设计[D].武汉:武汉理工大学,2010 Lei G. Virtual simulation analysis and optimization design of McPherson suspension system based on ADAMS[D]. Wuhan:Wuhan University of Technology, 2010(in Chinese)
[9]	李海艳.基于ADAMS的麦弗逊主动悬架性能参数的优化及控制研究[D].沈阳:东北大学,2008 Li H Y. The study on control and optimal of MacPherson active suspension's performance parameter based on ADAMS[D]. Shenyang:Northeastern University, 2008(in Chinese)
[10]	陈永耀.麦弗逊悬架参数对整车平顺性影响仿真研究[D].杭州:浙江工业大学,2009 Chen Y Y. Simulation study on the influence of the McPherson suspension parameters on the vehicle ride comfort[D]. Hangzhou:Zhejiang University of Technology, 2009(in Chinese)
[11]	高晋,宋传学.橡胶衬套刚度对悬架特性的影响[J].吉林大学学报(工学版),2010,40(2):324-329 Gao J, Song C X. Influence of rubber bushing stiffness on suspension performance[J]. Journal of Jilin University (Engineering and Technology Edition), 2010,40(2):324-329(in Chinese)
[12]	Fialho I, Balas G J. Road adaptive active suspension design using linear parameter-varying gain-scheduling[J]. IEEE Transactions on Control Systems Technology, 2002,10(1):43-54
[13]	Thite A N, Banvidi S, Ibicek T, et al. Suspension parameter estimation in the frequency domain using a matrix inversion approach[J]. Vehicle System Dynamics, 2011,49(12):1803-1822
[14]	樊海林.在用汽车四轮定位参数变化对操纵稳定性影响研究[D].重庆:重庆交通大学,2008 Fan H L. Changes of the four-wheel alignment parameters impact on the using vehicle handling stability study[D]. Chongqing:Chongqing Jiaotong University, 2008(in Chinese)
[15]	王惠生.麦弗逊悬架和转向系统的性能仿真研究[D].天津:河北工业大学,2006 Wang H S. McPherson suspension and steering system performance simulation research[D]. Tianjin:Hebei University of Technology, 2006(in Chinese)