均匀设计试验法在溢流阀锥阀芯优化中的应用

杨波波; 李淑智; 杨旭; 胡宇

doi:10.13433/j.cnki.1003-8728.2017.1017

均匀设计试验法在溢流阀锥阀芯优化中的应用

doi: 10.13433/j.cnki.1003-8728.2017.1017

1.
火箭军工程大学201教研室, 西安 710025

详细信息

作者简介:
杨波波(1993-),硕士研究生,研究方向为液压阀在线检测技术,1477581456@qq.com

通讯作者:
李淑智(联系人),副教授,博士,硕士生导师,939106835@qq.com

计量
- 文章访问数: 160
- HTML全文浏览量: 17
- PDF下载量: 8
- 被引次数: 0
出版历程
- 收稿日期: 2016-07-06
- 刊出日期: 2017-10-05

Application of Uniform Design Text Method in Relief Cone Valve Core Optimization

1.
01 Staff Room, Rocket Force University of Engineering, Xi'an 710025, China

摘要

摘要: 针对溢流阀在线检测系统中，锥阀芯材料为紫铜时，阀芯力学性能不满足设计要求的问题，提出通过优化部分机械结构参数，进而提升阀芯力学性能的研究方法。设计了一种基于均匀设计试验法的阀芯力学性能的仿真试验方案，借助于有限元法、均匀设计试验、动态响应模型等研究方法，分析了各参数对结构优化影响的敏感度，求解了多指标函数与结构参数之间的动态响应模型。最后，利用指标图谱和遗传算法对结构参数进行了优化计算，对比了均匀设计试验法和指标图谱法的优化结果。结果表明，均匀设计试验和指标图谱优化结果十分接近，均匀设计试验法适用于阀芯力学性能的优化设计。
- 均匀设计试验 /
- 锥阀芯优化 /
- 力学性能 /
- 有限元法 /
- 指标图谱
Abstract: When the cone valve core material was selected for red copper in relief valve online detection system, the valve mechanical properties does not meet the design conditions. The research method of improving valve core mechanical properties was proposed by optimizing the structural parameters of mechanisms. Lists of test plans of mechanical properties simulation of valve core were scheduled by uniform design test method. By means of finite element method, uniform design test, dynamic response model and other methods, the sensitivity of each parameter to the optimization results was analyzed. The dynamic response model of multiple index function and structural parameters was solved. The structural parameters were optimized by using the index fingerprint and genetic algorithm. The optimization results of uniform design test and index fingerprint were compared. Results show that the results of uniform design test and index fingerprint are very close, uniform design test method is suited for optimization analysis of the valve core mechanical properties.
- relief cone valve /
- optimization /
- design /
- mechanisms /
- mechanical properties

HTML全文

参考文献(15)

[1]	王幼民.溢流阀结构参数的优化设计[J].农业机械学报,2003,34(1):67-69 Wang Y M. Optimization of structure parameters of hydraulic relief valve[J]. Transactions of the Chinese Society of Agricultural Machinery, 2003,34(1):67-69(in Chinese)
[2]	李燕山,连红运,李运飞.适用于在线检测的涡流检测系统研制[J].自动化仪表,2008,29(7):60-62,65 Li Y S, Lian H Y, Li Y F. Research and development of eddy current testing system suitable for on-line detection[J]. Process Automation Instrumentation, 2008,29(7):60-62,65(in Chinese)
[3]	曹鸿钧,段宝岩.基于非概率可靠性的结构优化设计研究[J].应用力力学学报,2005,22(3):381-385 Cao H J, Duan B Y. Approach to optimization of uncertain structures based on non-probabilistic reliability[J]. Chinese Journal of Applied Mechanics, 2005,22(3):381-385(in Chinese)
[4]	李响,李为吉,彭程远.基于均匀试验设计的响应面方法及其在无人机一体化设计中的应用[J].机械科学与技术,2005,24(5):575-577,619 Li X, Li W J, Peng C Y. Response surface methodology based on uniform design and its application to complex engineering system optimization[J]. Mechanical Science and Technology, 2005,24(5):575-577,619(in Chinese)
[5]	李登万,陈洪涛,钟成明.基于均匀设计的车削表面残余应力试验[J].机械设计与研究,2014,30(4):100-104 Li D W, Chen H T, Zhong C M. Test study on residual stress in turned workpiece surfaces based on mixed-level uniform design[J]. Machine Design & Research, 2014,30(4):100-104(in Chinese)
[6]	金雁,朱美琪,王丽铮.均匀设计法在船舶设计中的应用[J].武汉理工大学学报(交通科学与工程版),2002,26(6):752-754lJin Y, Zhu M Q, Wang L Z. Application of even design method in ship design[J]. Journal of Wuhan University of Technology (Transportation Science & Engineering), 2002,26(6):752-754(in Chinese)
[7]	郭祥艳,王杰娟.均匀设计方法在雷达抗干扰仿真试验中的应用[J].火力与指挥控制,2015,40(8):160-163 Guo X Y, Wang J J. Application of uniform design method in anti-jamming simulation test of radar[J]. Fire Control & Command Control, 2015,40(8):160-163(in Chinese)
[8]	Pan M C, He Y Z, Tian G Y, et al. Defect characterisation using pulsed eddy current thermography under transmission mode and NDT applications[J]. NDT & E International, 2012,52:28-36
[9]	刘江.ANSYS 14.5 Workbench机械仿真实例详解[M].北京:机械工业出版社,2015:133-244 Liu J. Mechanical simulation examples based on Workbench[M]. Beijing:Machinery Industry Press, 2015:133-244(in Chinese)
[10]	赵选民.试验设计方法[M].北京:科学出版社,2006:169-184 Zhao X M. Test design method[M]. Beijing:Science Press, 2006:169-184(in Chinese)
[11]	李正祥,方水良,屠蔚蓝,等.基于均匀设计的产品优化变型设计[J].机械科学与技术,2011,30(6):892-896 Li Z X, Fang S L, Tu W L, et al. Product optimal variant design based on uniform design[J]. Mechanical Science and Technology for Aerospace Engineering, 2011,30(6):892-896(in Chinese)
[12]	王安麟,吴小锋,周成林,等.基于CFD的液压滑阀多学科优化设计[J].上海交通大学学报,2010,44(12):1767-1772 Wang A L, Wu X F, Zhou C L, et al. Multidisciplinary optimization of a hydraulic slide valve based on CFD[J]. Journal of Shanghai Jiaotong University, 2010,44(12):1767-1772(in Chinese)
[13]	Wu C F J,Hamada M.试验设计与分析及参数优化[M].张润楚,郑海涛,兰燕,等译.北京:中国统计出版社,2003:341-382 Wu C F J, Hamada M. Experiments planning, analysis, and parameter design optimization[M]. Zhang R C, Zheng H T, Lan Y, et al. trans. Beijing:China Statistics Press, 2003:341-382(in Chinese)
[14]	贾振元,褚宏飞,刘巍,等.基于Stewart结构六维大力传感器的性能分析及结构优化[J].仪器仪表学报,2010,31(2):341-346 Jia Z Y, Chu H F, Liu W, et al. Performance analysis and structure optimization of six-axis heavy force sensor based on Stewart platform[J]. Chinese Journal of Scientific Instrument, 2010,31(2):341-346(in Chinese)
[15]	马晓丽,马履中,周兆忠.正交-遗传试验算法的分析与应用[J].工程设计学报,2005,12(6):334-337 Ma X L, Ma L Z, Zhou Z Z. Study and application of orthogonal-genetic algorithm test method[J]. Journal of Engineering Design, 2005,12(6):334-337(in Chinese)