搅拌摩擦焊2124-T851铝合金超低周疲劳特性

姚宇荃; 王泓; 乙晓伟; 陈蓬; 杨建; 王新波

doi:10.13433/j.cnki.1003-8728.2017.0224

搅拌摩擦焊2124-T851铝合金超低周疲劳特性

doi: 10.13433/j.cnki.1003-8728.2017.0224

姚宇荃¹,
王泓^1, ,,
乙晓伟¹,
陈蓬²,
杨建²,
王新波²

1.
西北工业大学材料学院, 西安 710072;
2.
中航工业第一飞机设计研究院, 西安 710089

详细信息

作者简介:
姚宇荃(1991-),硕士研究生,研究方向为材料力学性能,疲劳断裂,332001442@qq.com

通讯作者:
王泓(联系人),副教授,博士,wanghong@nwpu.edu.cn

计量
- 文章访问数: 140
- HTML全文浏览量: 20
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2015-06-05
- 刊出日期: 2017-02-05

Extremely Low Cycle Fatigue Properties of 2124-T851 Aluminum Alloy Fabricated by Friction Stir Welding

1.
School of Material Science and Engineering, Northwestern Polytechnical University, Xi'an 710072, China;
2.
AVIC the First Aircraft Institute, Xi'an 710089, China

摘要

摘要: 为获得搅拌摩擦焊接（FSW）条件下单次加载断裂与循环加载断裂机制的演化规律，研究了FSW及标准基材2124-T851铝合金超低周疲劳（ELCF）特性。分析表明，FSW 试样S-N曲线在超低周疲劳寿命区符合幂函数关系但数据分散性大，且当指定寿命越大时，焊接试样相对于基材的定寿强度（SSFL）下降率越高。在极限寿命定义为1个循环的假设下，单次加载断裂与多次加载断裂具有统一的宏观变化规律，其微观断裂机制也具有连续演化的特征。超低周疲劳断口无明显的疲劳源区，FSW试样随着超低周疲劳寿命的增大，断裂特征由正断型向切断型转变。
- 搅拌摩擦焊 /
- 超低周疲劳 /
- 定寿强度 /
- S-N曲线
Abstract: In order to get the mechanism of single loading fracture and cyclic loading fracture of the bond fabricated by friction stir welding(FSW), the extremely low cycle fatigue (ELCF) features of the FSW specimen and standard matrix material 2124-T851 aluminum alloy have been studied. The results show that, in the extremely low cycle fatigue life zone, the S-N Curve of FSW specimen is corresponding with power function relationship but there is a large dispersion of data, and with the longer of the specified fatigue life, the FSW specimen has a higher decrease in strength of specified fatigue life(SSFL). Supposing that the limit of fatigue life is defined as 1 cycle, single loading fracture and cyclic loading fracture have a unified macro variable rule and the micro fracture mechanism also has the characteristics of continuous evolution. Obvious fatigue source region can not be observed on extremely low cycle fatigue fracture surface. With the increasing of extremely low cycle fatigue life, the type of FSW fracture characteristics turns the normal mode into shear mode.
- friction stir welding /
- ELCF /
- SSFL /
- S-N curve

HTML全文

参考文献(12)

[1]	郑玉珍,刘存玉,刘金凤.影响2124铝合金断裂韧性的因素[J].航空材料学报,1989,9(4):16-23 Zheng Y Z, Liu C Y, Liu J F. Influence of some factors on fracture toughness of 2124 Aluminium alloy[J]. Journal of Materials Engineering, 1989,9(4):16-23 (in Chinese)
[2]	Li X, Yin Z M, Nie B, et al. High cycle fatigue characteristics of 2124-T851 aluminum alloy[J]. Frontiers of Materials Science in China, 2007,1(2):168-172
[3]	Lapovok R, Loader C, Torre F H D, et al. Microstructure evolution and fatigue behavior of 2124 aluminum processed by ECAE with back pressure[J]. Materials Science and Engineering:A, 2006,425(1-2):36-46
[4]	严芳芳,王泓,张建国,等.2124铝合金全范围裂纹扩展速率表达式[J].热加工工艺,2011,40(16):34-36 Yan F F, Wang H, Zhang J G, et al. Full range fatigue crack propagation expression of 2124 aluminum alloy[J]. Hot Working Technology, 2011,40(16):34-36 (in Chinese)
[5]	乙晓伟,王泓,杨智,等.2124-T851厚板S向超低周疲劳行为及断裂特征[J].稀有金属材料与工程,2014,43(6):1347-1351 Yi X W, Wang H, Yang Z, et al. Extremely low cycle fatigue behavior and fracture characteristics of 2124-T851 thick plate in short transverse direction[J]. Rare Metal Materails and Engineering, 2014,43(6):1347-1351 (in Chinese)
[6]	王快社,沈洋,王训宏,等.1060/3003铝合金搅拌摩擦焊焊接接头材料流动规律研究[J].稀有金属材料与工程,2005,34(10):1677-1680 Wang K S, Shen Y, Wang X H, et al. Study on flow visualization with friction stir welding of 1060 aluminum and 3003 aluminum[J]. Rare Metal Materials and Engineering, 2005,34(10):1677-1680 (in Chinese)
[7]	柯黎明,刘鸽平,邢丽,等.铝合金LF6与工业纯铜T1的搅拌摩擦焊工艺[J].中国有色金属学报,2004,14(9):1534-1538 Ke L M, Liu G P, Xing L, et al. Friction stir welding process of aluminum alloy LF6 with copper T1[J]. The Chinese Journal of Nonferrous Metals, 2004,14(9):1534-1538 (in Chinese)
[8]	Nandan R, DebRoy T, Bhadeshia H K D H. Recent advances in friction-stir welding-Process, weldment structure and properties[J]. Progress in Materials Science, 2008,53(6):980-1023
[9]	郭兰中,李新勇.基于DFR法的连接结构疲劳可靠性分析[J].兰州交通大学学报(自然科学版),2005,24(3):15-16,20 Guo L Z, Li X Y. Reliability analysis of mechanical fastener joints based on detail fatigue rating[J]. Journal of Lanzhou Jiaotong University (Natural Sciences), 2005,24(3):15-16,20 (in Chinese)
[10]	Goranson U G. Fatigue issues in aircraft maintenance and repairs[J]. International Journal of Fatigue, 1997,19(93):3-21
[11]	董彦民;刘文珽;杨超.军用飞机结构耐久性设计的细节疲劳额定值方法[J].航空学报,2010,31(12):2357-2364 Dong Y M; Liu W T; Yang C. Military aircraft durability design method based on detail fatigue rating[J]. Acta Aeronautica et Astronautica Sinica, 2010,31(12):2357-2364 (in Chinese)
[12]	Kim S G, Kim W T, Suzuki T. Interfacial compositions of solid and liquid in a phase-field model with finite interface thickness for isothermal solidification in binary alloys[J]. Physical Review E, 1998,58(3):3316-3323