不同幅值激励的复合材料板时间反转损伤识别方法

周俊宇; 杨洋; 肖黎; 屈文忠

doi:10.13433/j.cnki.1003-8728.2017.0223

不同幅值激励的复合材料板时间反转损伤识别方法

doi: 10.13433/j.cnki.1003-8728.2017.0223

1.
武汉大学工程力学系, 武汉 430072

基金项目:

国家自然科学基金项目（51378402）资助

详细信息

作者简介:
周俊宇(1991-),硕士研究生,研究方向为结构健康监测,junyuzhou@whu.edu.cn

通讯作者:
屈文忠(联系人),教授,博士生导师,qwz@whu.edu.cn

计量
- 文章访问数: 190
- HTML全文浏览量: 24
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2015-06-19
- 刊出日期: 2017-02-05

Damage Detection for Composites with Different Amplitude of Excitation by using Via Time Reversal Method

1.
Department of Engineering Mechanics, Wuhan University, Wuhan 430072, China

摘要

摘要: 复合材料结构受到冲击时会产生基体开裂、层脱等损伤，通常情况下损伤界面保持闭合接触。小幅值激励下应力波产生的应变极小，损伤界面仍处于闭合的线性状态，时间反转重构信号不能表明损伤的存在与否。针对该问题，采用不同幅值激励的时间反转方法进行损伤检测与识别，利用时间反转重构信号与激励信号的相关系数构造了损伤指数，开展了基于压电作动/传感阵列的复合材料板损伤识别与定位的实验研究。实验结果表明：小幅值激励下作动-传感的完整路径和损伤路径上的时间反转重构信号与原始激励信号相似程度均很高，不能表征结构中的损伤；而增大激励幅值至某一阈值后，损伤路径上的损伤指数明显增大，而完整路径上的损伤指数变化不明显；利用该方法准确地识别与定位了板中损伤。
- 复合材料板 /
- 损伤识别 /
- 时间反转 /
- 激励幅值
Abstract: Matrix cracking and delamination may occur when composite structures exposed to impact. Generally, these crack interfaces remain closely contact. Such incipient damage may fail to be detected if the strain generated by the excitation is too small to open the contact interface. To overcome this deficiency, a new kind of damage detection for composites with different amplitude of excitation by using time reversal method is proposed. Applying different amplitude excitation voltage on the piezoelectric(PZT) transducers which are used to generate and receive Lamb wave signal, an experiment is set to detect impact damage in a composite plate based on the time reversal theory. Experimental results demonstrate that although the time reversal reconstructed signal is similar to which in an intact plate when a low amplitude excitation is applied, it does not indicate the presence of damage in the structure. When the excitation amplitude exceeds a certain threshold, the reconstructed signal would be different from the original excitation signal. Damage indexes of each path are defined with the correlation coefficient between the original excitation signal and the reconstructed signal. An imaging algorithm is developed to locate the impact damage on the plate. It turns out that the damage can be accurately detected and located.
- composite plate /
- damage detection /
- time reversal /
- excitation amplitude

HTML全文

参考文献(16)

[1]	De Angelis G, Meo M, Almond D P, et al. A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization[J]. NDT & E International, 2012,45(1):91-96
[2]	Rogge M D, Leckey C A C. Characterization of impact damage in composite laminates using guided wavefield imaging and local wavenumber domain analysis[J]. Ultrasonics, 2013,53(7):1217-1226
[3]	Pohl J, Mook G. SHM of CFRP-structures with impedance spectroscopy and Lamb waves[J]. International Journal of Mechanics and Materials in Design, 2010,6(1):53-62
[4]	Cawley P, Alleyne D. The use of Lamb waves for the long range inspection of large structures[J]. Ultrasonics, 1996,34(2-5):287-290
[5]	Su Z Q, Ye L, Lu Y. Guided Lamb waves for identification of damage in composite structures:a review[J]. Journal of Sound and Vibration, 2006,295(3-5):753-780
[6]	Sohn H, Park H W, Law K H, et al. Combination of a time reversal process and a consecutiv outlier analysis for baseline-free damage diagnosis[J]. Journal of Intelligent Material Systems and Structures, 2007,18(4):335-346
[7]	Fink M. Time reversal of ultrasonic fields. I. Basic principles[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1992,39(5):555-566
[8]	Xu B L, Giurgiutiu V. Single mode tuning effects on Lamb wave time reversal with piezoelectric wafer active sensors for structural health monitoring[J]. Journal of Nondestructive Evaluation, 2007,26(2-4):123-134
[9]	Lamberti A, Semperlotti F. Detecting closing delaminations in laminated composite plates using nonlinear structural intensity and time reversal mirrors[J]. Smart Materials and Structures, 2013,22(12):125006
[10]	Park H W, Sohn H, Law K H, et al. Time reversal active sensing for health monitoring of a composite plate[J]. Journal of Sound and Vibration, 2007,302(1-2):50-66
[11]	Park H W, Kim S B, Sohn H. Understanding a time reversal process in Lamb wave propagation[J]. Wave Motion, 2009,46(7):451-467
[12]	Poddar B, Bijudas C R, Mitra M, et al. Damage detection in a woven-fabric composite laminate using time-reversed Lamb wave[J]. Structural Health Monitoring, 2012,11(5):602-612
[13]	王强,袁慎芳,邱雷.基于时间反转理论的复合材料螺钉连接失效监测研究[J].宇航学报,2007,28(6):1719-1723 Wang Q, Yuan S F, Qiu L. Study on bolt debonding monitoring of composite joint based on time-reversal method[J]. Journal of Astronautics, 2007,28(6):1719-1723 (in Chinese)
[14]	Dos Santos S, Farova Z, Kus V, et al. Echodentography based on nonlinear time reversal tomography:Ultrasonic nonlinear signature identification[C]//International Congress On Ultrasonics:Gdańsk, 2011. Gdańsk, Poland:AIP Publishing, 2012,1433(1):203-206
[15]	Wang D, Ye L, Su Z Q, et al. Probabilistic damage identification based on correlation analysis using guided wave signals in aluminum plates[J]. Structural Health Monitoring, 2010,9(2):133-144
[16]	Mustapha S, Ye L, Wang D, et al. Debonding detection in composite sandwich structures based on guided waves[J]. AIAA Journal, 2012,50(8):1697-1706