纵-扭复合振动超声深滚加工残余应力场数值分析

郑建新; 段玉涛

doi:10.13433/j.cnki.1003-8728.2017.0216

纵-扭复合振动超声深滚加工残余应力场数值分析

doi: 10.13433/j.cnki.1003-8728.2017.0216

1.
河南理工大学机械与动力工程学院, 河南焦作 454003

基金项目:

国家自然科学基金项目（51005071）与河南省高等学校重点科研项目（16A460006）资助

详细信息

作者简介:
郑建新(1979-),副教授,博士,研究方向为超声加工技术和表面工程技术,zhengjx@hpu.edu.cn

计量
- 文章访问数: 172
- HTML全文浏览量: 24
- PDF下载量: 4
- 被引次数: 0
出版历程
- 收稿日期: 2015-07-17
- 刊出日期: 2017-02-05

Numerical Analysis of Residual Stress Field in Ultrasonic Deep Rolling Process with Longitudinal-torsional Vibration

1.
School of Mechanical and Power Engineering, Henan Polytechnic University, He'nan Jiaozuo 454003, China

摘要

摘要: 为研究平面试件在纵-扭复合振动超声深滚加工后材料应力分布及变化规律，采用有限元方法对Q345钢进行了纵-扭复合振动超声深滚加工残余应力场数值模拟。首先分析了加工后试件材料各应力分量沿深度方向的分布情况，然后研究了静压力、滚压速度、振幅和相位差对加工后材料残余应力的影响规律。结果表明：经纵-扭复合振动超声深滚加工后材料表层残余应力分布较均匀，表面为压应力，压应力沿试件深度方向先增后减；试件最大残余压应力及最大横向残余压应力深度和残余压应力层深度随静压力的增大而增大，随滚压速度的增大而减小，而表面残余压应力和最大纵向残余压应力深度无显著变化；试件横向残余压应力层深度随振幅的增加小幅度地增大，但最大残余压应力幅值和深度和纵向残余压应力层深度几无变化；相位差对残余应力影响可忽略不计。
- 纵-扭复合振动 /
- 超声深滚 /
- 残余应力 /
- 有限元方法
Abstract: To explore the stress distribution and laws induced by ultrasonic deep rolling with longitudinal-torsional (UDRP-LTV) vibration, the finite element method was adopted to study the residual stress in Q345 steel. The distribution of the component stress along the depth direction was studied, and the effects of the static pressure, rolling speed, longitudinal and torsional vibration amplitude on the residual stress were analyzed. The results show that the distribution of the residual stress in the surface layer is homogeneous after UDRP-LTV treatment, and the surface stress is compressive. The compressive stress firstly increases and then decreases along the depth. The maximum residual stress and the depth of the residual stress layer increase with the increasing of static force, and decrease with the increasing of rolling speed, while the surface residual stress and the depth of the maximum longitudinal residual stress slightly change. The depth of the transverse residual stress slightly increases with the increasing of amplitude, but the amplitude and depth of the maximum surface residual stress and the depth of the longitudinal residual stress slightly change. And the effect of the phase on the residual stress may be ignored.
- Longitudinal-Torsional Ultrasonic Vibration /
- Ultrasonic deep rolling /
- residual stress /
- finite element method

HTML全文

参考文献(11)

[1]	郑建新,罗傲梅,刘传绍.超声表面强化技术的研究进展[J].制造技术与机床,2012,(10):32-36 Zheng J X, Luo A M, Liu C S. Development of ultrasonic surface enhancement technique[J]. Manufacturing Technology & Machine Tool, 2012,(10):32-36 (in Chinese)
[2]	朱有利,王燕礼,边飞龙,等.金属材料超声表面强化技术的研究与应用进展[J].机械工程学报,2014,50(20):35-45 Zhu Y L, Wang Y L, Bian F L, et al. Progresses on research and application of metal ultrasonic surface enhancement technologies[J]. Journal of Mechanical Engineering, 2014,50(20):35-45 (in Chinese)
[3]	Abdullah A, Malaki M, Eskandari A. Strength enhancement of the welded structures by ultrasonic peening[J]. Materials & Design, 2012,38:7-18
[4]	刘海英,轧钢,路会龙.超声喷丸强化产生残余应力的有限元分析[J].新技术新工艺,2008,1(1):25-28 Liu H Y, Ya G, Lu H L. Finite element analysis of residual stress produced by ultrasonic shot-peening[J]. New Technology & New Process, 2008,1(1):25-28 (in Chinese)
[5]	郭超亚,鲁世红.铝合金超声喷丸残余应力场[J].中国表面工程,2014,27(2):75-80 Guo C Y, Lu S H. Residual stress of ultrasonic shot peened aluminum alloy[J]. China Surface Engineering, 2014,27(2):75-80 (in Chinese)
[6]	李进一,凌祥,周建新.超声冲击残余应力场的有限元模拟[J].航空材料学报,2012,32(1):84-88 Li J Y, Ling Y, Zhou J X. Finite element simulation of residual stress field induced by ultrasonic impact treatment[J]. Journal of Aeronautical Materials, 2012,32(1):84-88 (in Chinese)
[7]	Liu Y, Wang L J, Wang D P. Finite element modeling of ultrasonic surface rolling process[J]. Journal of Materials Processing Technology, 2011,211(12):2106-2113
[8]	刘宇.金属表面超声滚压加工理论及表层力学性能研究[D].天津:天津大学,2012 Liu Y. Research on the theory of ultrasonic surface rolling processing and mechanical properties of metal surface[D]. Tianjin:Tianjin University, 2012 (in Chinese)
[9]	Luo A M, Zheng J X, Wu H Q. Kinematics analysis on ultrasonic deep rolling with longitudinal-torsional vibration[J]. Advanced Materials Research, 2013,630:148-152
[10]	Hou Y L, Liu C S, Liu S Q. Effect of processing parameters on surface roughness in ultrasonic deep rolling 6061-T6 aluminum alloy with longitudinal-torsional vibration[J]. Applied Mechanics and Materials, 2014,722:60-63
[11]	郑建新,罗傲梅.6061-T6铝合金纵-扭复合振动超声深滚加工试验研究[J].稀有金属材料与工程,2015,44(3):733-737 Zheng J X, Luo A M. Experimental study on aluminum alloy 6061-T6 by ultrasonic deep rolling with longitudinal-torsional vibration[J]. Rare Metal Materials and Engineering, 2015,44(3):733-737 (in Chinese)