一种双腔射击式气动冲击锤的设计与性能分析

肖蒙; 严宏志; 周腾飞; 江晓磊

doi:10.13433/j.cnki.1003-8728.2017.0203

一种双腔射击式气动冲击锤的设计与性能分析

doi: 10.13433/j.cnki.1003-8728.2017.0203

肖蒙^1,2,
严宏志^1,2, ,,
周腾飞^1,2,
江晓磊^1,2

1.
中南大学高性能复杂制造国家重点实验室, 长沙 410083;
2.
中南大学机电工程学院, 长沙 410083

详细信息

作者简介:
肖蒙(1990-),硕士研究生,研究方向为机械设计与制造,15116262661@163.com

通讯作者:
严宏志(联系人),教授,博士生导师,yhzcsu@163.com

计量
- 文章访问数: 239
- HTML全文浏览量: 25
- PDF下载量: 13
- 被引次数: 0
出版历程
- 收稿日期: 2015-04-04
- 刊出日期: 2017-02-05

The Design and Characteristics Analysis of a Dual-chamber Shooting Pneumatic Hammer

Xiao Meng^1,2,
Yan Hongzhi^{1,2
, ,},
Zhou Tengfei^1,2,
Jiang Xiaolei^1,2

1.
State Key Laboratory for High Performance Complex Manufacturing, Central South University, Changsha 410083, China;
2.
College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China

摘要

摘要: 设计了一种结构紧凑的双腔射击式气动冲击锤，建立了该冲击锤工作过程的动力学模型，通过数值求解得到了气动冲击锤冲击速度、位移随时间的变化规律，以及气动冲击锤结构和气动参数对芯锤运动特性的影响。结果表明：芯锤冲击速度随通气小孔的直径增大而增大，当直径增大到一定值后，冲击速度增大不再明显；背压腔排气孔直径的大小在一定范围内会改变芯锤速度的变化趋势，当排气孔直径较小时，芯锤速度先增后减，当排气孔直径增大到一定值后，芯锤速度始终增加；预压气腔的初始体积对芯锤的冲击速度没有影响。同时，采用有限元方法对冲击锤冲击碰撞过程进行了仿真，得到了冲击时间及冲击力的大小。研究表明，所设计的双腔射击式气动冲击锤具有结构轻、冲击力大的特点。
- 双腔射击式气动冲击锤 /
- 动力学模型 /
- 数值求解 /
- 有限元
Abstract: This paper presents a compact dual-chamber shooting pneumatic hammer, establishes a dynamic model for its working process. The pneumatic hammer impact velocity, displacement variation with time and the effects of structural and aerodynamic parameters on motion characteristics of the hammer core are obtained through numerical solutions. The simulation results indicate that impact velocity of the core increases with the diameter of the ventilation holes, the trend of the core's velocity changes by the exhaust hole of back pressure gas chamber within a certain size, when the exhaust hole's diameter is smaller, the core's velocity decrease after an initial increase; but when the exhaust hole's diameter increases to a certain value, the core's velocity always increases. The initial volume of preloading gas chamber has no effect on the impact velocity of the core. Moreover, after using the finite element method to simulate the impact collision process of the hammer, the time of impact process and the size of the impact force are obtained. The study shows that this dual-chamber shooting pneumatic hammer has a light structure and large impact force.
- dual-chamber shooting pneumatic hammer /
- dynamic model /
- numerical solution /
- finite element method

HTML全文

参考文献(12)

[1]	Lundberg B. Microcomputer simulation of stress wave energy transfer to rock in percussive drilling[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1982,19(5):229-239
[2]	Chiang L E, Elias D A. Modeling impact in down-the-hole rock drilling[J]. International Journal of Rock Mechanics and Mining Sciences, 2000,37(4):599-613
[3]	Chiang L E, Elias D A. A 3D FEM methodology for simulating the impact in rock-drilling hammers[J]. International Journal of Rock Mechanics and Mining Sciences, 2008,45(5):701-711
[4]	Krembel F. Pneumatically operated marking tool:US, 420074[P]. 1974-11-12
[5]	武汉工程大学.变向内置阀式冲击气缸:中国利102367825A[P].2012-03-07 Wuhan Institute of Technology. The impact of change to the built-in cylinder:China, 102367825A[P].2012-03-07 (in Chinese)
[6]	江都市永坚有限公司.磁性冲击气缸:中国,利N2649842Y[P].2004-10-20 Jiangdu Wing-kin, Ltd. Magnetic impact cylinder:China, CN2649842Y[P]. 2004-10-20 (in Chinese)
[7]	高汉东.压紧活塞式冲击气缸[J].内燃机,1991,(3):45-46 Gao H D. A Compression piston impact cylinder[J]. Internal Combustion Engines, 1991,(3):45-46 (in Chinese)
[8]	江涛,李锻能.基于仿真计算的气动潜孔冲击器性能分析[J].机床与液压,2010,38(3):101-103,126 Jiang T, Li D N. Performance analysis for pneumatic down-the-hole hammer with simulation computation[J]. Machine Tool & Hydraulics, 2010,38(3):101-103,126 (in Chinese)
[9]	王成刚,谢小恒,郑晓敏,等.冲击气缸的数学建模与动态仿真[J].机床与液压,2013,41(7):143-145 Wang C G, Xie X H, Zheng X M, et al. Mathematical modeling and dynamic simulation for the impact cylinder[J]. Machine Tool & Hydraulics, 2013,41(7):143-145 (in Chinese)
[10]	张志兵.气动冲击锤的计算机模拟研究[D].长沙:中南大学,2001 Zhang Z B. The computer imitation study on the pneumatic impact hammer[D]. Changsha:Central South University, 2001 (in Chinese)
[11]	钟伟,陶国良,刘昊,等.气动钉枪的数学建模与仿真研究[J].浙江大学学报(工学版),2008,42(2):239-242 Zhong W, Tao G L, Liu H, et al. Mathematical modeling and simulation of pneumatic nail gun[J]. Journal of Zhejiang University (Engineering Science), 2008,42(2):239-242 (in Chinese)
[12]	甘海仁,赵统武.冲击锤的工作应力和能量传递分析[J].凿岩机械气动工具,2007,(1):18-23 Gan H R, Zhao T W. Work stress and energy transfer analysis of impact hammer[J]. Rock Drilling Machinery & Pneumatic Tools, 2007,(1):18-23 (in Chinese)