留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

镀锌钢板圆筒拉深件表面损伤行为的研究

林启权 殷望 董文正 臧莉 杨雪峰

林启权, 殷望, 董文正, 臧莉, 杨雪峰. 镀锌钢板圆筒拉深件表面损伤行为的研究[J]. 机械科学与技术, 2016, 35(5): 795-799. doi: 10.13433/j.cnki.1003-8728.2016.0525
引用本文: 林启权, 殷望, 董文正, 臧莉, 杨雪峰. 镀锌钢板圆筒拉深件表面损伤行为的研究[J]. 机械科学与技术, 2016, 35(5): 795-799. doi: 10.13433/j.cnki.1003-8728.2016.0525
Lin Qiquan, Yin Wang, Dong Wenzheng, Zang Li, Yang Xuefeng. Investigation of Surface Damage in Cylinder Deep Drawing of Galvanized Steels[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(5): 795-799. doi: 10.13433/j.cnki.1003-8728.2016.0525
Citation: Lin Qiquan, Yin Wang, Dong Wenzheng, Zang Li, Yang Xuefeng. Investigation of Surface Damage in Cylinder Deep Drawing of Galvanized Steels[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(5): 795-799. doi: 10.13433/j.cnki.1003-8728.2016.0525

镀锌钢板圆筒拉深件表面损伤行为的研究

doi: 10.13433/j.cnki.1003-8728.2016.0525
基金项目: 

国家自然科学基金项目(51175445)与湖南省自然科学基金项目(14JJ2066)资助

详细信息
    作者简介:

    林启权(1965-),教授,博士,研究方向为金属塑性成形理论与数值模拟技术,xtulqq@126.com

Investigation of Surface Damage in Cylinder Deep Drawing of Galvanized Steels

  • 摘要: 采用不同凹模圆角半径下的圆筒拉深实验,对热镀锌钢板DC53D+Z和合金化热镀锌钢板DC53D+ZF拉深成形工件表面损伤行为进行研究。实验结果表明,在不同凹模圆角半径下,DC53D+Z 表面损伤有熨平纹和表面划痕两种形式,而DC53D+ZF的表面损伤则有镀层龟裂和表面划痕两种形式;随着凹模圆角半径的减小,DC53D+Z熨平纹现象增加,DC53D+ZF垂直拉深方向的裂纹增加。利用ANSYS/LS-DYNA有限元分析软件,建立基于界面结合的镀锌板圆筒拉深有限元模型,对镀锌钢板拉深过程进行模拟。模拟结果表明,随着凹模圆角半径的减小,镀层沿拉深方向的第一主应变增加。数值模拟结果与实验结果对比表明,镀层沿拉深方向的第一主应变是影响表面损伤程度的主要原因。
  • [1] 董志洪.我国镀锌板生产现状与未来发展趋势[J].中国金属通报,2009,(20):13-15 Dong Z H. Production of galvanized sheet status quo and future trends[J]. China Metal Bulletin, 2009,(20):13-15(in Chinese)
    [2] 朱长华.我国镀锌钢板生产工艺综述[J].涟钢科技与管理,2000,(3):27-35 Zhu C H. Summary of galvanized steel production process[J]. Liangang Technology and Management, 2000,(3):27-35(in Chinese)
    [3] Gronostajski J Z. Behaviour of coated steel sheets in forming processes[J]. Journal of Materials Processing Technology, 1995,53(1-2):167-176
    [4] 陈思琪,王雷刚,黄瑶.基于杯突试验的镀锌板冲压成形失效分析[J].热加工工艺,2011,40(21):191-193 Chen S Q, Wang L G, Huang Y. Failure analysis of zinc-coated sheet in stamping forming based on cupping test[J]. Hot Working Technology, 2011,40(21):191-193 (in Chinese)
    [5] 张笑笑,王雷刚,黄瑶.镀锌板冲压成形性的模拟与实验研究[J].锻压技术,2011,36(6):19-23 Zhang X X, Wang L G, Huang Y. Simulation and experimental research of galvanized sheet stamping formability[J]. Forging & Stamping Technology, 2011,36(6):19-23 (in Chinese)
    [6] 侯英岢.汽车钢板冲压成形表面损伤规律与控制方法研究[D].上海:上海交通大学,2009 Hou Y K. Research on rules and control methods of sheet surface damage in forming of auto sheet steels[D]. Shanghai: Shanghai Jiaotong University, 2009 (in Chinese)
    [7] Garza L G, van Tyne C J. Friction and formability of galvannealed interstitial free sheet steel[J][. Journal of Materials Processing Technology, 2007,187-188:164-168 [8] Kim H. Prediction and elimination of galling in forming galvanized advanced high strength steels (AHSS)[D]. Columbus: The Ohio State University, 2008
    [8] Kim H, Sung J Y, Goodwin F E, et al. Investigation of galling in forming galvanized advanced high strength steels (AHSSs) using the twist compression test (TCT)[J]. Journal of Materials Processing Technology, 2008,205(1/3):459-468
    [9] Wang W R, Hua M, Wei X C. A comparison study of sliding friction behavior between two high strength DP590 steel sheets against heat treated DC53 punch: Hot-dip galvanized sheet versus cold rolled bare sheet[J]. Tribology International, 2012,54:114-122
    [10] Yu Z Q, Hou Y K, Jiang H M, et al. Investigation of surface damage in forming of high strength and galvanized steel sheets[J]. Journal of Materials Science & Technology, 2009,25(3):389-394
    [11] Hou Y K, Yu Z Q, Zhang W G, et al. Surface topography evolvement of galvanized steels in sheet metal forming[J]. Transactions of Nonferrous Metals Society of China, 2009,19(2):305-310
    [12] Hou Y K. Experimental study on surface damage in forming of galvanized steel sheets[J]. Advanced Materials Research, 2011,221:674-679
    [13] 蒋浩民,陈新平,俞宁峰.镀锌钢板的锌层附着特性及成形性研究[J].塑性工程学报,2008,15(2):57-60 Jiang H M, Chen X P, Yu N F. Study on the zinc coating adhesion and formability of zinc-coated sheet steel[J]. Journal of Plasticity Engineering, 2008,15(2):57-60 (in Chinese)
    [14] 温乃盟,郑建平.热镀锌钢板表面润滑处理及其摩擦特性[J].材料保护,2012,45(2):64-66 Wen N M, Zheng J P. Lubrication treatment of galvanized steel sheet surface and investigation of its friction behavior[J]. Journal of Materials Protection, 2012,45(2):64-66 (in Chinese)
    [15] Livermore Software Technology Corporation. LS-DYNA keyword user's manual[Z]. Livermore Software, Volume I, 2013
    [16] Xiao L H, Su X P, Wang J H, et al. A novel blister test to evaluate the interface strength between nickel coating and low carbon steel substrate[J]. Materials Science and Engineering: A, 2009,501(1-2):235-241
    [17] Parisot R, Forest S, Gourgues A F, et al. Modeling the mechanical behavior of a multicrystalline zinc coating on a hot-dip galvanized steel sheet[J]. Computational Materials Science, 2000,19(1-4):189-204
    [18] Nunomura Y, Takasugi T. Plastic deformation and fracture behavior of galvannealed coating[J]. ISIJ International, 2003,43(3):454-460
  • 加载中
计量
  • 文章访问数:  136
  • HTML全文浏览量:  21
  • PDF下载量:  6
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-06-16
  • 刊出日期:  2016-05-05

目录

    /

    返回文章
    返回