留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

挖掘机动臂焊接残余变形的热弹塑性有限元分析

吴振 王发展 安高灵 刘太平 丁蒲刚

吴振, 王发展, 安高灵, 刘太平, 丁蒲刚. 挖掘机动臂焊接残余变形的热弹塑性有限元分析[J]. 机械科学与技术, 2016, 35(5): 696-700. doi: 10.13433/j.cnki.1003-8728.2016.0507
引用本文: 吴振, 王发展, 安高灵, 刘太平, 丁蒲刚. 挖掘机动臂焊接残余变形的热弹塑性有限元分析[J]. 机械科学与技术, 2016, 35(5): 696-700. doi: 10.13433/j.cnki.1003-8728.2016.0507
Wu Zhen, Wang Fazhan, An Gaoling, Liu Taiping, Ding Pugang. Analysis of Welding Residual Deformation for Excavator Boom By Using Thermal Elastic-plastic Finite Element Method[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(5): 696-700. doi: 10.13433/j.cnki.1003-8728.2016.0507
Citation: Wu Zhen, Wang Fazhan, An Gaoling, Liu Taiping, Ding Pugang. Analysis of Welding Residual Deformation for Excavator Boom By Using Thermal Elastic-plastic Finite Element Method[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(5): 696-700. doi: 10.13433/j.cnki.1003-8728.2016.0507

挖掘机动臂焊接残余变形的热弹塑性有限元分析

doi: 10.13433/j.cnki.1003-8728.2016.0507
基金项目: 

中联重科产学研重点项目资助

详细信息
    作者简介:

    吴振(1986-),硕士,研究方向为结构件焊接变形、残余应力,250895097@qq.com;王发展,教授,博士后,硕士研究生导师,研究方向为大型复杂结构件焊接变形、残余应力分析与控制,wangfz10_1@163.com

    吴振(1986-),硕士,研究方向为结构件焊接变形、残余应力,250895097@qq.com;王发展,教授,博士后,硕士研究生导师,研究方向为大型复杂结构件焊接变形、残余应力分析与控制,wangfz10_1@163.com

Analysis of Welding Residual Deformation for Excavator Boom By Using Thermal Elastic-plastic Finite Element Method

  • 摘要: 采用建立的以温度为控制参数的分段移动温控型热源模型作为焊接热源,利用一系列加速收敛、减少增量步数等技术,在保证高精度的前提下,高效的完成了挖掘机动臂热弹塑性有限元分析,预测了挖掘机动臂残余变形量,并与实际测量值进行比较分析。结果表明,残余变形在垂直方向呈收缩,水平方向前侧拉伸、后侧压缩,整体存在翘曲现象,与测量结果十分吻合。模拟结果准确预测了残余变形演变规律。分段移动温控型热源模型具有操作简便、计算效率高、模拟精度高的特点。
  • [1] 汪建华.焊接数值模拟技术及其应用[M].上海:上海交通大学出版社,2003:9-10 Wang J H. Numerical simulation technology and its application in welding[M]. Shanghai: Shanghai Jiaotong University Press, 2003:9-10 (in Chinese)
    [2] 汪苏,王春侠,郭军刚.航空发动机薄壁机匣激光焊接有限元数值模拟[J].北京航空航天大学学报,2006,32(7):833-837 Wang S, Wang C X, Guo J G. Finite element numerical simulation of laser welding for thin-wall outer casing on aero-engine[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006,32(7):833-837 (in Chinese)
    [3] 郭云飞.海洋平台用高强钢复杂节点焊接残余应力预测[D].镇江:江苏科技大学,2012:69 Guo Y F. Forecast of the welding residual stress in complicated joints of the high-strength steel of offshore platform[D]. Zhenjiang: Jiangsu University of Science and Technology, 2012:69 (in Chinese)
    [4] 赵利华,张开林.构架侧梁焊接反变形量的优化分析[J].上海交通大学报,2011,45(11):1700-1704 Zhao L H, Zhang K L. Optimization analysis of welding reverse deformation for the side beam of bogie frame[J]. Journal of Shanghai Jiaotong University, 2011,45(11):1700-1704 (in Chinese)
    [5] 王苹,方洪渊,韩德成,等.基于热-力耦合法的高速车地板焊接变形数值模拟[J].焊接学报,2012,33(6):15-18 Wang P, Fang H Y, Han D C, et al. Numerical simulation on as-welded deflection of high speed rail floor based on thermo-mechanical coupling[J]. Transactions of the China Welding Institution, 2012,33(6):15-18 (in Chinese)
    [6] 闫德俊,刘雪松,周广涛,等.大型底板结构焊接顺序控制变形数值分析[J].焊接学报,2009,30(6):55-58 Yan D J, Liu X S, Zhou G T, et al. Numerical analysis on optimizing welding sequence of large-sized bottom structure for controlling welding distortion[J]. Transactions of the China Welding Institution, 2009,30(6):55-58 (in Chinese)
    [7] 吴铭方,陆雪冬,岑越,等.AH36薄板不同焊接工艺下应力的三维数值模拟[J].焊接学报,2012,33(4):25-28 Wu M F, Lu X D, Cen Y, et al. FEM of welding stress in AH36 steel plate with different welding parameters[J]. Transactions of the China Welding Institution, 2012,33(4):25-28 (in Chinese)
    [8] 陈建波,罗宇,龙哲.大型复杂结构焊接变形热弹塑性有限元分析[J].焊接学报,2008,29(4):69-72 Chen J B, Luo Y, Long Z. Analysis on welding distortion of large complicated structure by thermal elastic-plastic finite element method[J]. Transactions of the China Welding Institution, 2008,29(4):69-72 (in Chinese)
    [9] 蔡志鹏.大型结构焊接变形数值模拟的研究与应用[D].北京:清华大学,2001:16-18 Cai Z P. Study on numerical simulation of welding distortions in huge fabricatios and its application[D]. Beijing: Tsinghua University, 2001:16-18 (in Chinese)
    [10] 王煜,赵海燕,吴甦,等.电子束焊接数值模拟中分段移动双椭球热源模型的建立[J].机械工程学报,2004,40(2):165-169 Wang Y, Zhao H Y, Wu S, et al. Establishment of segmented moving double ellipsoid heat source model in electron beam welding numerical simulation[J]. Chinese Journal of Mechanical Engineering, 2004,40(2):165-169 (in Chinese)
    [11] 崔晓芳,岳红杰,兆文忠,等.高速机车构架侧梁的焊接顺序[J].焊接学报,2006,27(1):101-104 Cui X F, Yue H J, Zhao W Z, et al. Study of different welding sequences in the bogie frame of the high-speed locomotive[J]. Transactions of the China Welding Institution, 2006,27(1):101-104 (in Chinese)
    [12] 《机械工程材料性能数据手册》编委会.机械工程材料性能数据手册[M].北京:机械工业出版社,1994:105-110 Editorial Committee of Databook of Materials for Mechanical Engineering. Databook of materials for mechanical engineering[M]. Beijing: China Machine Press, 1994:105-110 (in Chinese)
    [13] Masubuchi K. Prediction and control of residual stress and deformation in welded structures[C]//Proceedings of the International Symposium on Theoretical Prediction in Joining and Welding, Japan: Osaka, 1996:71-88
    [14] Goldak J, Chakravati A, Bibby M. A new finite element model for welding heat sources[J]. Metallurgical Transactions B, 1984,15(2):299-305
    [15] D.拉达伊.焊接热效应[M].熊第京,等译.北京:机械工业出版社,1997:127-131 Radaj D. Heat effects of welding[M]. Xiong D J, et al. Trans. Beijing: China Machine Press, 1997:127-131 (in Chinese)
    [16] 郑振太.大型厚壁结构焊接过程的数值模拟研究与应用[D].天津:天津大学,2007:75 Zheng Z T. Numerical simulation research and application of welding process on a large thick-walled structures[D]. Tianjin: Tianjin University, 2007:75 (in Chinese)
  • 加载中
计量
  • 文章访问数:  242
  • HTML全文浏览量:  42
  • PDF下载量:  6
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-07-18
  • 刊出日期:  2016-05-05

目录

    /

    返回文章
    返回