拉弯辅助渐进成形直壁件试验研究

安传海; 王辉; 高霖; 王德亮

doi:10.13433/j.cnki.1003-8728.2016.0317

拉弯辅助渐进成形直壁件试验研究

doi: 10.13433/j.cnki.1003-8728.2016.0317

1.
南京航空航天大学机电学院, 南京 210016

详细信息

作者简介:
安传海(1990-),硕士研究生,研究方向为数控渐进成形,anchuanhai520@126.com

通讯作者:
高霖,教授,博士生导师,meelgao@nuaa.edu.cn

计量
- 文章访问数: 191
- HTML全文浏览量: 35
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2014-05-04
- 刊出日期: 2016-03-05

Experimental Study on Incremental Forming Assisted Bending and Stretching Strategy for Vertical Walls Parts

1.
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

摘要

摘要: 针对传统直壁件多道次渐进成形工艺存在的路径规划复杂、加工时间长、壁厚过度减薄的现状,提出了一种拉弯辅助渐进成形直壁件的新工艺。该工艺包含三个步骤:预成形、拉弯组合成形直壁和校形。基于此工艺进行了试验研究,结果表明:拉弯组合成形直壁件壁厚减薄程度小,壁厚分布均匀,加工时间明显缩短,更加符合实际生产的需要;预成角直接决定直壁件最终壁厚,预成形角越大,壁厚减薄越大;在周向压应力的作用下,直壁部分出现局部区域增厚现象,且预成角越小,增厚区域越大。
- 拉弯组合 /
- 渐进成形 /
- 直壁件 /
- 预成形角
Abstract: Disadvantages in traditional multi-stage forming of vertical walls can be summarized as complexity of process planning, long machining time consuming and severe thinning. Aiming at this situation, a new bending and stretching strategy is put forward, which consists of three stages: performing, bending and stretching and finishing for vertical walls. Experiments are carried out based on the new technology, and the result shows that: the new strategy has access to the vertical wall products with small thinning and more uniform thickness distribution in vertical wall. Furthermore, the processing time is significantly short so as to cater for production requirement; preformed angle directly determines the final wall thickness. Through increasing the preformed angle, the wall thickness is sharply declined; because of the influence of the circumferential stress, the increase in thickness occurred in local area of vertical walls, and the thickened area get larger with the decline of the preformed angle.
- bending and stretching strategy /
- incremental forming /
- preformed angle /
- vertical wall parts

HTML全文

参考文献(15)

[1]	莫健华,韩飞.金属板材数字化渐进成形技术研究现状[J].中国机械工程,2008,19(4):491-497 Mo J H, Han F. State of the arts and latest research on incremental sheet NC forming technology[J]. China Mechanical Engineering, 2008,19(4),491-497 (in Chinese)
[2]	Emmens W C, Sebastiani G, Van Den Boogaard A H. The technology of incremental sheet forming-a brief review of the history[J]. Journal of Materials Processing Technology, 2010,210(8):981-997
[3]	Jeswiet J, Micari F, Hirt G, et al. Asymmetric single point incremental forming of sheet metal[J]. CIRP Annals-Manufacturing Technology, 2005,54(2):88-114
[4]	Kitazawa K, Nakajima A. A method for producing aluminum cylindrical shell having uniform wall-thickness by CNC incremental forming process[J]. Journal of Japan Institute of Light Metals, 1997,47(7):378-384
[5]	Kitazawa K, Nakajima A. Rupture phenomena in cylindrical incremental drawing of aluminum sheets[J]. Journal of Japan Institute of Light Metals, 1999,49(2):72-76
[6]	周六如,肖祥芷,莫健华.金属直壁筒形件数控渐进成形工艺研究[J].机械科学与技术,2004,23(11):1366-1369 Zhou L R, Xiao X Z, Mo J H. A study of NC incremental vertical wall cylinder forming process[J]. Mechanical Science and Technology, 2004,23(11):1366-1369 (in Chinese)
[7]	Taleb Araghi B, Bambach M, Hirt G. Comparison of some final part geometrical characteristics of cylindrical cups manufactured by deep-drawing and two-point incremental sheet forming[J]. Key Engineering Materials, 2009,410-411:355-363
[8]	贾俐俐,高锦张,郑勇,等.金属直壁筒形件数控增量成形工艺研究[J].锻压技术,2006,(5):133-135 Jia L L, Gao J Z, Zheng Y, et al. Study of NC incremental vertical wall cylinder forming process[J]. Forging & Stamping Technology, 2006,(5):133-135 (in Chinese)
[9]	金玲玲,高霖,史晓帆,等.多道次单点渐进成形变形规律试验研究[J].中国机械工程,2014,25(2):262-266 Jin L L, G L, Shi X F, et al. Experimental study on the deformation law of multi-stage single point incremental forming[J]. China Mechanical Engineering, 2014,25(2):262-266 (in Chinese)
[10]	莫健华,丁勇,黄树槐.金属板材数控单点渐进成形加工轨迹优化研究[J].中国机械工程,2003,14(24):2138-2140 Mo J H, Ding Y, Huang S H. Research on tool-path optimization of sheet metal numerical control single point incremental forming[J]. China Mechanical Engineering, 2003,14(24):2138-2140 (in Chinese)
[11]	李泷杲,高霖,韦红余.金属板料渐进成形有限元仿真过程中复杂成形路径的构建方法[J].机械工程学报,2006,42(6):227-230 Li S G, Gao L, Wei H Y. Method on generating complex loading path for fem simulation of incremental sheet metal forming process[J]. Journal of Mechanical Engineering, 2006,42(6):227-230 (in Chinese)
[12]	Lasunon O, Knight W A. Comparative investigation of single-point and double-point incremental sheet metal forming processes[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2007,221(12):1725-1732
[13]	Young D, Jeswiet J. Wall thickness variations in single-point incremental forming[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2004,218(11):1453-1459
[14]	崔震,高霖,陆启建.复杂钣金零件渐进成形方法[J].机械工程学报,2007,43(12):235-239 Cui Z, Gao L, Lu Q J. Incremental forming methods on complicated sheet parts[J]. Chinese Journal of Mechanical Engineering, 2007,43(12):235-239 (in Chinese)
[15]	Eyckens P, Belkassem B, Henrard C, et al. Strain evolution in the single point incremental forming process: digital image correlation measurement and finite element prediction[J]. International Journal of Material Forming, 2011,4(1):55-71