低冲蚀角下40Cr冲蚀与空蚀耦合磨损特性研究

庞佑霞; 李彬; 刘厚才

doi:10.13433/j.cnki.1003-8728.2016.0315

低冲蚀角下40Cr冲蚀与空蚀耦合磨损特性研究

doi: 10.13433/j.cnki.1003-8728.2016.0315

1.
长沙学院先进设计与制造技术研究所, 长沙 410003;
2.
湖南科技大学机电工程学院, 湘潭 411201

基金项目:

国家自然科学基金项目(51475049)与湖南省"十二五"重点建设学科项目资助

详细信息

作者简介:
庞佑霞(1959-),教授,研究方向为流体机械摩擦磨损,流体动力学,pyoux2002@126.com

计量
- 文章访问数: 219
- HTML全文浏览量: 29
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2014-04-22
- 刊出日期: 2016-03-05

Exploring Characteristics of Coupled Erosion and Cavitation Wear of 40Cr in Low Impact Angle

1.
Advanced Design and Manufacturing Technology Research Institute, Changsha University, Changsha 410003, China;
2.
College of Electromechanical Engineering, Hunan University of Science and Technology, Xiangtan 411201, China

摘要

摘要: 基于CFD理论,数值模拟了低冲角下(冲蚀角α7Pa,在这种高强度冲击的反复作用下,材料更容易发生疲劳失效;2)当α30°时,材料表面的磨痕主要为瞬时高温氧化和疲劳剥落引起的夹杂着白色氧化铁颗粒的蚀坑。40Cr试件失重量随冲蚀角变化趋势与三次样条曲线吻合得很好。
- 冲蚀角 /
- 40Cr /
- 冲蚀和空蚀 /
- 耦合磨损
Abstract: Based on the CFD theory, the flow field characteristics of coupled erosion and cavitation wear were numerically simulated in different impact angles (α7 Pa when the impact angle is about 30°, the materials are more prone to fatigue failure in this kind of repeated impact; 2) the failure of 40Cr is mainly micro-cutting furrows and some pinhole-like pits when the impact angle αα>30°. The trend between the weight loss of 40Cr specimen and its impact angle coincides with the cubic spline very well.
- 40Cr /
- coupled wear /
- erosion and cavitation /
- impact angle

HTML全文

参考文献(15)

[1]	庞佑霞,唐勇,梁亮,等.冲蚀与空蚀交互磨损三相流场仿真与试验研究[J].机械工程学报,2012,48(3):115-120 Pang Y X, Tang Y Liang L, et al. Flow field simulation and experimental research on interactive erosion and cavitation wears in three phases[J]. Journal of Mechanical Engineering, 2012,48(3):115-120 (in Chinese)
[2]	Thapa B, Chaudhary P, Dahlhaug O G, et al. Study of combined effect of sand erosion and cavitation in hydraulic turbines[C]//International Conference on Small Hydropower-Hydro, Sri Lanka. 2007,22:24
[3]	Amarendra H J, Chaudhari G P, Nath S K. Cavitation and slurry erosion of aluminum in the slurry pot tester[J]. Materials Science Forum, 2013,736:218-222
[4]	Grekula M. Cavitation mechanisms related to erosion studies on kaplan turbines, foils, and propellers[D]. Göteborg: Chalmers University of Technology, 2010
[5]	Dunstan P J, Li S C. Cavitation enhancement of silt erosion: numerical studies[J]. Wear, 2010,268(7-8):946-954
[6]	张涛,陈次昌,郭清.含沙水流中翼型空蚀磨损试验[J].农业机械学报,2010,41(11):31-37 Zhang T, Chen C C, Guo Q. Experiment of damage of cavitation and silt abrasion for hydrofoil in silt-laden water flow[J]. Transactions of the Chinese Society for Agricultural Machinery, 2010,41(11):31-37 (in Chinese)
[7]	Field J E, Camus J J, Tinguely M, et al. Cavitation in impacted drops and jets and the effect on erosion damage thresholds[J]. Wear, 2012,290-291:154-160
[8]	Abouel-Kasem A, Ahmed S M. Cavitation erosion mechanism based on analysis of erosion particles[J]. Journal of Tribology, 2008,130(3):031601
[9]	任岩,张兰金,李延频,等.水轮机的磨蚀失效特性[J].排灌机械工程学报,2012,30(2):188-191 Ren Y, Zhang L J, Li Y P, et al. Sand abrasion characteristics of materials for hydro-turbines[J]. Drainage and Irrigation Machinery, 2012,30(2):188-191 (in Chinese)
[10]	Hong S, Wu YP, Wang Q, et al. Microstructure and cavitation-silt erosion behavior of high-velocity oxygen-fuel (HVOF) sprayed Cr3 C2-NiCr coating[J]. Surface and Coatings Technology, 2013,225:85-91
[11]	段昌国.水轮机沙粒磨损[M].北京:清华大学出版社,1981 Duan C G. Turbine sand abrasion[M]. Beijing: Tsinghua University Press, 1981 (in Chinese)
[12]	鲍崇高,高义民,邢建东.水轮机过流部件材料的冲蚀磨损腐蚀及其交互作用[J].西安交通大学学报,2010,44(11):66-70 Bao C G, Gao Y M, Xing J D. Interaction between erosive-wear and corrosion of alloy materials for hydroturbine in hydroelectric station[J]. Journal of Xi'an Jiaotong University, 2010,44(11):66-70 (in Chinese)
[13]	Romo S A, Santa J F, Giraldo J E. Cavitation and high-velocity slurry erosion resistance of welded Stellite 6 alloy[J]. Tribology International, 2012,47:16-24
[14]	李诗卓,董祥林.材料的冲蚀磨损与微动磨损[M].北京:机械工业出版社,1987 Li S Z, Dong X L. Erosion wear and fretting wear of materials[M]. Beijing: China Machine Press, 1987 (in Chinese)
[15]	庞佑霞,朱宗铭,梁亮,等余.多种材料的冲蚀与空蚀交互磨损试验装置的研制及应用[J].机械科学与技术,2012,31(1):1-3 Pang Y X, Zhu Z M, Liang L, et al. Development and application on wearing experimental device of multi-material interactive erosion and cavitations[J]. Mechanical Science and Technology for Aerospace Engineering, 2012,31(1):1-3 (in Chinese)