留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

微线段环形齿球齿轮传动的齿面接触分析

苏德瑜 罗善明 王建

苏德瑜, 罗善明, 王建. 微线段环形齿球齿轮传动的齿面接触分析[J]. 机械科学与技术, 2015, 34(12): 1830-1836. doi: 10.13433/j.cnki.1003-8728.2015.1205
引用本文: 苏德瑜, 罗善明, 王建. 微线段环形齿球齿轮传动的齿面接触分析[J]. 机械科学与技术, 2015, 34(12): 1830-1836. doi: 10.13433/j.cnki.1003-8728.2015.1205
Su Deyu, Luo Shanming, Wang Jian. Tooth Contact Analysis of Micro-segment Spherical Gear Drives[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(12): 1830-1836. doi: 10.13433/j.cnki.1003-8728.2015.1205
Citation: Su Deyu, Luo Shanming, Wang Jian. Tooth Contact Analysis of Micro-segment Spherical Gear Drives[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(12): 1830-1836. doi: 10.13433/j.cnki.1003-8728.2015.1205

微线段环形齿球齿轮传动的齿面接触分析

doi: 10.13433/j.cnki.1003-8728.2015.1205
基金项目: 

国家自然科学基金项目(51205335、51375411)、福建省科技计划重点项目(2014H0049)、福建省自然科学基金项目(2013J01209)、厦门理工学院高层次人才科研启动基金项目(YKJ14008R)及厦门理工学院对外合作与交流项目(E201400800)资助

详细信息
    作者简介:

    苏德瑜(1990-),硕士研究生,研究方向为机械传动,sudeyu1990@163.com

    通讯作者:

    罗善明(联系人),教授,博士,smluo@xmut.edu.cn

Tooth Contact Analysis of Micro-segment Spherical Gear Drives

  • 摘要: 探讨了微线段环形齿球齿轮的构造过程,分析了球齿轮啮合过程中接触椭圆的变化规律,计算了微线段环形齿球齿轮的传动曲率与接触强度,建立了微线段环形齿球齿轮传动的参数化模型。采用有限元方法分析了微线段环形齿球齿轮轮齿的接触和弯曲应力,并与相同参数的渐开线球齿轮进行了对比分析。数值模拟结果表明,微线段环形齿球齿轮的接触应力和弯曲应力比渐开线球齿轮都有较大幅度的减少。
  • [1] Yang S C, Chen C K, Li K Y. A geometric model of a spherical gear with a double degree of freedom[J]. Journal of Materials Processing Technology, 2002,123(2):219-224
    [2] Yang S C. A rack-cutter surface used to generate a spherical gear with discrete ring-involute teeth[J]. The International Journal of Advanced Manufacturing Technology, 2005,27(1-2):14-20
    [3] 潘存云,温熙森.渐开线环形齿球齿轮传动原理与运动分析[J].机械工程学报,2005,41(5):1-9 Pan C Y, Wen X S. Research on transmission principle and rinematic analysis for involut spherical gear[J]. Chinese Journal of Mechanical Engineering, 2005,41(5):1-9 (in Chinese)
    [4] 潘存云,温熙森.渐开线球齿轮齿廓曲面方程的推导[J].国防科技大学学报,2004,26(4):93-98 Pan C Y, Wen X S. Profile formule derivation of the involute spherical gears[J]. Journal of National University of Defense Technology, 2004,26(4):93-98 (in Chinese)
    [5] Komori T, Ariga R, Nagata S. A new profile of relative curvature being zero at many contact points [C]//Proceedings of the International Conference on Gearing, Beijing China: CMES, 1988,1:39-42
    [6] Komori T, Ariga Y, Nagata S. A new gears profile having zero relative curvature at many contact points (LogiX Tooth Profile) [J]. Journal of Mechanisms, Transmissions, and Automation in Design, 1990,112(3):430-436
    [7] 赵韩,梁锦华,刘红雨,等.微线段齿廓的形成原理及特性[J].机械工程学报,1997,33(5):7-11 Zhao H, Liang J H, Liu H Y, et al. Constructing principle and features of tooth profiles with micro-segments[J]. Journal of Mechanical Engineering, 1997,33(5):7-11 (in Chinese)
    [8] Komori T, Ariga R, Nagata S. A new gear profile having zero relative curvature at many contact points (Logix tooth profile)[C]//Proceedings of the International Power Transmission and Gearing Conference, Chicago: ASME, 1989,2:599-606
    [9] Wang J, Hou L, Luo S M. The generation principle and mathematical models of a novel spherical gear drive[J]. Advanced Materials Research, 2012,479-481:1421-1428
    [10] Litvin F L, Fuentes A. Gear geometry and applied theory[M]. New York: Cambridge University Press, 2004
    [11] 姚齐水,李常义,潘存云.渐开线环形齿球传动中齿面曲率及曲率半径研究[J].机械传动,2005,29(6):8-10 Yao Q S, Li C Y, Pan C Y. Research of the curvature and the curvature-radius on involutes spherical gear[J]. Journal of Mechanical Transmission, 2005,29(6):8-10 (in Chinese)
    [12] 姚齐水,李常义,潘存云.渐开线环形齿球齿轮副接触点共轭曲率半径及接触强度计算研究[J].机械科学与技术,2007,26(1):96-100 Yao Q S, Li C Y, Pan C Y. Calculation of the conjugate-radius and contact strength at the contact point of the involute spherical gear pair[J]. Mechanical Science and Technology, 2007,26(1):96-100 (in Chinese)
    [13] 赵韩,陈奇,黄康.基于精确建模的微线段齿轮弯曲强度理论分析[J].组合机床与自动化加工技术,2010,(7):62-64 Zhao H, Chen Q, Huang K. Theory analysis on bending strength of micro-segment tooth profile gears based on accurate modeling[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2010,(7):62-64(in Chinese)
    [14] 李婷,潘存云,张立杰,等.球齿轮传动的齿面接触分析和应力分析[J].国防科技大学学报,2008,30(6):123-128 Li T, Pan C Y, Zhang L J, et al. Research of the tooth contact and stress analysis of spherical gear drives[J] Journal of National University of Defense Technology, 2008,30(6):123-128 (in Chinese)
    [15] 李婷,潘存云.球齿轮传动齿廓接触特性分析[J].航空学报,2008,29(6):1680-1686 Li T, Pan C Y. Research on contact characteristics of spherical gear drives[J]. Acta Aeronautica et Astronautica Sinica, 2008,29(6):1680-1686(in Chinese)
  • 加载中
计量
  • 文章访问数:  184
  • HTML全文浏览量:  20
  • PDF下载量:  6
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-01-21
  • 刊出日期:  2015-12-05

目录

    /

    返回文章
    返回