留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

电动叉车势能回收效率的影响因素研究

张克军 陈剑

张克军, 陈剑. 电动叉车势能回收效率的影响因素研究[J]. 机械科学与技术, 2015, 34(11): 1761-1768. doi: 10.13433/j.cnki.1003-8728.2015.1122
引用本文: 张克军, 陈剑. 电动叉车势能回收效率的影响因素研究[J]. 机械科学与技术, 2015, 34(11): 1761-1768. doi: 10.13433/j.cnki.1003-8728.2015.1122
Zhang Kejun, Chen Jian. Research on Influence Factors of Potential Energy Recovery Efficiency in Electric Forklift[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(11): 1761-1768. doi: 10.13433/j.cnki.1003-8728.2015.1122
Citation: Zhang Kejun, Chen Jian. Research on Influence Factors of Potential Energy Recovery Efficiency in Electric Forklift[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(11): 1761-1768. doi: 10.13433/j.cnki.1003-8728.2015.1122

电动叉车势能回收效率的影响因素研究

doi: 10.13433/j.cnki.1003-8728.2015.1122
基金项目: 

国家火炬计划项目(2012GH041261)与国家重点新产品计划项目(2011TJC30006)资助

详细信息
    作者简介:

    张克军(1971-),高级工程师,博士研究生,研究方向为机械系统动态性能及低噪声设计及新能源叉车设计,zhangkejunheli@163.com

Research on Influence Factors of Potential Energy Recovery Efficiency in Electric Forklift

  • 摘要: 为了提高电动叉车势能回收效率,给出了势能回收系统各部件的数学模型及势能回收效率的数学模型,研究了电动叉车势能回收效率的影响因素。利用AMESim和Virtual.lab Motion软件进行了电动叉车势能回收系统仿真分析,最后通过实验来检验仿真模型的有效性和仿真结果的正确性。研究结果表明:电动叉车势能回收效率随着门架负载及液压马达排量的增大而增大,随着货叉下降速度、货叉下降加速度、液压马达转动惯量、升降油缸活塞面积及升降油缸运动部件质量的减小而增大。
  • [1] 张彦廷,王庆丰,肖清.液压驱动惯性系统能量回收的节能实验研究[J].机床与液压,2007,35(7):91-92 Zhang Y T, Wang Q F, Xiao Q. Experimental research on energy-saving with energy regeneration for hydraulic powered inertial system[J]. Machine Tool & Hydraulics, 2007,35(7):91-92 (in Chinese)
    [2] Minav T, Immonev P, Laurila L, et al. Electric energy recovery system for a hydraulic forklift-theoretical and experimental evaluation[J]. IET Electric Power Applications, 2011,5(4):377-385
    [3] Minav T A, Virtanen A, Laurila L, et al. Storage of energy recovered from an industrial forklift[J]. Automation in Construction, 2012,22:506-515
    [4] Minav T. Electric energy recovery system for a hydraulic forklift[D]. Finland: Lappeeneenranta University of Technology, 2008
    [5] 朱建新,刘复平,朱俊霖,等.电动叉车势能回收液压系统工作效率分析与实验[J].机械设计与研究,2011,27(6):101-104 Zhu J X, Liu F P, Zhu J L, et al. Analysis and experimental study on hydraulic system work efficiency for recovering the potential energy of electric forklift[J]. Machine Design and Research, 2011,27(6):101-104 (in Chinese)
    [6] 代鑫,张承宁,梁新成.混合动力液压挖掘机能量回收系统仿真研究[J].北京工商大学学报(自然科学版),2010,28(1):43-47 Dai X, Zhang C N, Liang X C. Energy recovery system simulation and research of hybrid hydraulic excavator[J]. Journal of Beijing Technology and Business University (Natural Science Edition), 2010,28(1):43-47 (in Chinese)
    [7] 裴磊.混合动力挖掘机势能回收系统的研究[D].杭州:浙江大学,2008 Pei L. Energy recovery system research of hybrid hydraulic excavator[D]. Hangzhou: Zhejiang University, 2008 (in Chinese)
    [8] Lin T L, Wang Q F, Hu B Z, et al. Research on the energy regeneration systems for hybrid hydraulic excavators[J]. Automation in Construction, 2010,19(8):1016-1026
    [9] 陈明东.液压挖掘机动臂下降势能回收技术研究[D].长春:吉林大学,2013 Chen M D. The study on boom potential energy recovery technology of hydraulic excavator[D]. Changchun: Jilin University, 2013 (in Chinese)
    [10] 汪贵平.纯电动汽车驱动与制动能量回收控制策略研究[D].西安:长安大学,2009 Wang G P. Study on control strategy of electric driving and regenerative braking for pure electric vehicle[D]. Xi'an: Chang'an University, 2009 (in Chinese)
    [11] 郭金刚,王军平,曹秉刚.电动车最大化能量回收制动力分配策略研究[J].西安交通大学学报,2008,42(5):607-611 Guo J G, Wang J P, Cao B G. Brake force distribution strategy for electric vehicle based on maximum energy recovery[J]. Journal of Xi'an Jiaotong University, 2008,42(5): 607-611 (in Chinese)
    [12] 陈国金,金绍勋,陈慧鹏.基于VL Motion的装载机工作装置耦合仿真分析研究[J].机电工程,2012,29(10):1135-1138 Chen G J, Jin S X, Chen H P. Coupled simulation study on working device of loader based on VL Motion[J]. Journal of Mechanical & Electrical Engineering, 2012,29(10):1135-1138 (in Chinese)
    [13] 谢志坤,史科科,刘伯聪,等.某激光切割机悬臂梁的动力学仿真研究[J].组合机床与自动化加工技术,2013,(7):19-21 Xie Z K, Shi K K, Liu B C, et al. Dynamics simulation for cantilever beam of a laser cutting machine[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2013,(7):19-21 (in Chinese)
    [14] 李云霞,王增才.基于AMESim的电动叉车液压起升节能系统的仿真研究[J].机床与液压,2009,37(11):211-213,238 Li Y X, Wang Z C. Study on the electronic forklift hydraulic lift energy-saving system based on AMESim[J]. Machine Tool & Hydraulics, 2009,37(11):211-213,238 (in Chinese)
    [15] 周能文,王亚峰,王凯峰.基于AMESim的液压位置控制系统动态特性研究[J].机械工程与自动化,2010,(4):82-84 Zhou N W, Wang Y F, Wang K F. Dynamic characteristics of hydraulic position control system based on AMESim[J]. Mechanical Engineering & Automation, 2010,(4):82-84 (in Chinese)
  • 加载中
计量
  • 文章访问数:  124
  • HTML全文浏览量:  14
  • PDF下载量:  3
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-02-12
  • 刊出日期:  2015-11-05

目录

    /

    返回文章
    返回