导轨平行度误差对工作台运动误差影响的建模与分析

何改云; 王凯; 郭龙真; 丁伯慧

doi:10.13433/j.cnki.1003-8728.2015.1112

导轨平行度误差对工作台运动误差影响的建模与分析

doi: 10.13433/j.cnki.1003-8728.2015.1112

1.
天津大学机构理论与装备设计教育部重点实验室, 天津 300072

基金项目:

国家高技术研究发展计划(863计划)项目(2012AA040701)及国家自然科学基金项目(51205286)资助

详细信息

作者简介:
何改云(1965-),教授,博士生导师,研究方向为加工质量在机监测与控制,CAD/CAM/CAI 集成技术,hegaiyun@tju.edu.cn

计量
- 文章访问数: 131
- HTML全文浏览量: 20
- PDF下载量: 11
- 被引次数: 0
出版历程
- 收稿日期: 2013-12-04
- 刊出日期: 2015-11-05

Influencing Modeling and Analysis of Guide Parallelism Error on Table Motion Error

1.
Key Lab for Mechanism Theory and Equipment Design, Ministry of Education, Tianjin University, Tianjin 300072, China

摘要

摘要: 机床导轨是机床各运动部件相互运动的基准,导轨误差改变了机床各部件的相对位置,破坏了各部件相对运动的准确性,造成了工作台运动误差,最终影响被加工零件的加工精度。研究了直线滚动导轨平行度误差对机床工作台运动误差的影响,根据赫兹接触理论分析了滚珠受力与接触变形的关系,基于齐次坐标变换和最小余能原理定量分析了工作台的运动误差。最后通过算法举例、仿真及计算结果的对比,表明该算法能准确计算出工作台的运动误差。
- 导轨误差 /
- 平行度误差 /
- 运动误差 /
- 算法
Abstract: Machine tool guide is the relative movement datum of each moving parts. Guide error changes the relative positions of the moving parts, resulting in a relative movement error. It will cause the table motion error and finally affects the machining accuracy. The effect of the linear rolling guide parallelism error on the table motion error is studied. According to the Hertz contact theory, we analyze the relationship between the ball bearing and the contact deformation. Then, the table motion error is obtained with the homogeneous coordinate transformation method and the minimum complementary energy principle. Comparing the calculation with simulation results, the algorithm can accurately calculate the table motion error.
- ball bearings /
- calculations /
- errors /
- installation

HTML全文

参考文献(17)

[1]	智体桂.机床导轨感应加热淬火的质量控制[J].机械科学与技术,1995,(1):42-44 Zhi T G. Quality control of induction hardening machine tool guide[J]. Mechanical Science and Technology for Aerospace Engineering, 1995,(1):42-44 (in Chinese)
[2]	Shaw D, Su W L. Study of stiffness of a linear guideway by FEA and experiment[J]. Structural Longevity, 2011,5(3):129-138
[3]	Shaw D, Su W L. Theoretical study of contact angles of a linear guideway[J]. Structural Longevity, 2011,5(3):139-145
[4]	Shaw D, Su W L. Stiffness analysis of linear guideways without preload[J]. Journal of Mechanics, 2013,29(2):1-6
[5]	Ohta H, Tanaka K. Vertical stiffnesses of preloaded linear guideway type ball bearings incorporating the flexibility of the carriage and rail[J]. Journal of Tribology, 2010,132(1)
[6]	陈汀,黄其柏.一种计及滑块裙部变形的滚珠直线导轨副垂直刚度模型[J].中国机械工程,2011,22(13):1546-1550 Chen T, Huang Q B. Vertical stiffness model of linear motion guide considering flexibility of carriage[J]. China Mechanical Engineering, 2011,22(13):1546-1550 (in Chinese)
[7]	Tao W J, Zhong Y, Feng H T, et al. Model for wear prediction of roller linear guides[J]. Wear, 2013,305(1-2):260-266
[8]	Horng T L. The study of contact pressure analyses and prediction of dynamic fatigue life for linear guideways system[J]. Modern Mechanical Engineering, 2013,3:69-76
[9]	Khim G, Park C H, Shamoto E, et al. Prediction and compensation of motion accuracy in a linear motion bearing table[J]. Precision Engineering, 2011,35(3):393-399
[10]	Fan K C, Chen H M, Kuo T H. Prediction of machining accuracy degradation of machine tools[J]. Precision Engineering, 2012,36(2):288-298
[11]	Al-Bender F, De Moerlooze K. On the relationship between normal load and friction force in pre-sliding frictional contacts. Part 1: Theoretical analysis[J]. Wear, 2010,269(3-4):174-182
[12]	Al-Bender F, De Moerlooze K. A model of the transient behavior of tractive rolling contacts[J]. Advances in Tribology, 2008,Article ID 214894
[13]	Al-Bender F, Symens W. Characterization of frictional hysteresis in ball-bearing guideways[J]. Wear, 2005,258(11):1630-1642
[14]	王盘铭.滚动直线导轨副的力学性能研究[D].武汉:华中科技大学,2006 Wang P M. Research on mechanic performance of linear motion guide[D]. Wuhan: Huazhong University of Science and Technology, 2006 (in Chinese)
[15]	Johnson R L, Ghaednia H, Lee H, et al. Contact mechanics[M]//Menezes P L, Nosonovsky M, Ingole S P, et al. Tribology for Scientists and Engineers. New York: Springer, 1995:93-140
[16]	Goldsmith W. Impact: the theory and physical behavior of colliding solids[M]. London: Edward Arnold Ltd, 1960
[17]	Pilkey W D, Wunderlich W. Mechanics of structures: variational and computational methods[M]. Boca Raton: CRC Press, 1994