液力计算法及DFI-PID下液力缓速器恒力矩制动性能建模与仿真分析

罗天洪; 贺海燕

doi:10.13433/j.cnki.1003-8728.2015.0827

液力计算法及DFI-PID下液力缓速器恒力矩制动性能建模与仿真分析

doi: 10.13433/j.cnki.1003-8728.2015.0827

1.
重庆交通大学机电与汽车工程学院, 重庆 400074

详细信息

作者简介:
罗天洪（1975-），教授，博士，研究方向为工程机械设计、多领域仿真等，tianhong.luo@163.com

计量
- 文章访问数: 150
- HTML全文浏览量: 14
- PDF下载量: 8
- 被引次数: 0
出版历程
- 收稿日期: 2013-04-21
- 刊出日期: 2015-08-05

Modeling and Simulation Analysis of Constant Torque Braking for Hydraulic Retarder Based on Hydraulic Calculation Method and DFI-PID

1.
Department of Mechanical, Electrical and Automotive Engineering, Chongqing Jiaotong University, Chongqing 400074, China

摘要

摘要: 重型车辆在崎岖山路或下长坡行驶时，可以通过控制液力缓速器实现恒力矩制动特性达到稳定行驶的目的。针对液力缓速器能在短时间内产生高制动力现象，提出一套液压控制系统，实现缓速器恒力矩制动性能。这套控制系统通过考虑缓速器充液率、排油阀开度和内腔油压，采用液力计算法解决液力缓速器建模的液力损失问题。并基于整车制动仿真和微分先行增量式PID（DFI-PID）控制策略仿真，建立液力缓速器液压控制联合仿真的模型，得到在较高充液率情况下，排油阀开度和内腔油压的变化规律，最终实现恒力矩制动性能的控制。分析结果表明：在制动过程中，在较高充液率的前提下，需要调节排油阀的开度来保证液力缓速器较高强度的恒力矩功能。
- 液力缓速器 /
- 控制系统 /
- 联合仿真 /
- 恒力矩控制
Abstract: Along rugged mountain roads or downhill roads, heavy-duty vehicles can achieve the purpose of stable driving with the constant torque braking of a hydraulic retarder. Considering the hydraulic retarder can produce high braking torque in a short time, we proposes a hydraulic control system to realize the constant torque braking. Because the hydraulic control system considers the liquid filling rate of the hydraulic retarder, its vent valve opening and cavity pressure, the hydraulic loss of the hydraulic retarder is reduced through hydrodynamic calculation. Besides, based on the vehicle braking and control simulation and the differential forward incremental PID (DFI-PID) simulation, the co-simulation of the control of the hydraulic retarder was carried out, thus obtaining the changes in vent valve opening and cavity pressure at higher liquid filling rate and then realizing the constant torque braking. The analysis results show that, during braking, at higher liquid filling rate, the vent valve opening needs to be adjusted to ensure that the hydraulic retarder has the constant torque braking of high strength.
- control /
- controllers /
- co-simulation /
- flow rate

HTML全文

参考文献(15)

[1]	Schreck H, Kucher H, Reisch B. ZF retarder in commercial vehicles[R]// SAE paper 922452. USA: SAE, 1992:739-749
[2]	Jun Y, Guo X X, Tan G F, et al. Co-simulation based hydraulic retarder braking control system[C]// SAE International, Beijing, 2009:928-931
[3]	刘岩.电控液力缓速器进气系统的压力控制阀特性研究[D].长春:吉林大学,2007 Liu Y. Research on pressure control valve characteristics of electronic intake system for hydraulic retarder[D]. Changchun: Jilin University, 2007 (in Chinese)
[4]	张玉玺,程秀生,李辉,等.基于模糊逻辑的液力减速器智能控制的研究[J].昆明理工大学学报,2007,32(5):14-17 Zhang Y X, Cheng X S, Li H, et al. Intelligent control of the hydraulic retarder based on fuzzy logic[J]. Journal of Kunming Institute of Technology, 2007,32(5):14-17 (in Chinese)
[5]	陆中华, 程秀生. 液力缓速器恒速控制策略的仿真研究[J].汽车技术,2009,(11):1-3 Lu Z H, Cheng X S. Simulation research on constant speed control strategy of hydraulic retarder[J]. Automobile Technology, 2009,(11):1-3 (in Chinese)
[6]	蔡志宇.客车液力缓速器制动性能及恒速仿真[D].太原:太原科技大学,2013 Cai Z Y. Brake performance of hydraulic retarder and constant speed simulation for passenger car[D]. Taiyuan: Taiyuan University of Science and Technology, 2013 (in Chinese)
[7]	蔡志宇,王军,贾志绚,等.客车液力缓速器制动性能仿真[J].汽车工程师,2013,(1):22-26 Cai Z Y, Wang J, Jia Z X, et al. Brake performance simulation of retarder for passenger car[J]. Automotive Engineers, 2013,(1):22-26 (in Chinese)
[8]	杨莉玲.液压盘式制动器建模与仿真分析[D].武汉:武汉理工大学,2009 Yang L L. Modeling and simulation analysis of hydraulic disk brake[D]. Wuhan: Wuhan University of Technology, 2009 (in Chinese)
[9]	叶磊,尹作发.基于Matlab/Simulink的车辆制动过程分析[J].公路与汽运,2006,(6):5-7 Ye L, Yin Z F. Analysis of process for vehicle brake based on Matlab/Simulink[J]. Highways & Automotive Applications, 2006,(6):5-7 (in Chinese)
[10]	宋建军.重型载重汽车液力缓速器及其控制系统研究[D].长春:吉林大学,2013 Song J J. Research on hydraulic retarder and its control system for heavy truck[D]. Changchun: Jilin University, 2013 (in Chinese)
[11]	杨晓生,彭志坚,肖益波,等.基于微分先行PID算法的铸锭炉温控系统[J].电子工业专用设备,2009,38(7):42-45 Yang XS, Peng Z J, Xiao Y B, et al. Temperature control system based on differential ahead PID algorithm of polysilicon on ingot furnace[J]. Equipment for Electronic Products Manufacturing, 2009,38(7):42-45 (in Chinese)
[12]	Zhang S T, Liu L S, Hu C W. Research on rectifier based on TMS320LF2407 and IR2130 used in the aircraft[C]// 2011 Eighth International Conference on Fuzzy Systems and Knowledge Discovery, Shanghai: IEEE, 2011:26-28
[13]	陆中华,程秀生.重型车液力缓速器制动性能仿真研究[J].汽车技术,2009,(3):22-24 Lu Z H, Cheng X S. Simulation study on the brake performance of heacy-duty hydraulic retarder[J]. Automobile Technology, 2009,(3):22-24 (in Chinese)
[14]	高博麟.重型车与液力缓速器匹配特性的仿真研究[D].长春:吉林大学,2009 Gao B L. Simulation study on the matching performance of heavy vehicle and hydraulic retarder[D]. Changchun: Jilin University, 2009 (in Chinese)
[15]	赖锋.重型汽车制动系统结构分析及其设计方法研究[D].武汉:武汉理工大学,2006 Lai F. Research on braking system structure analysis and its design method of heavy duty automobile[D]. Wuhan: Wuhan University of Technology, 2006 (in Chinese)