假人脚部力学特性的试验研究

张恺; 颜凌波; 杜现平; 曹立波

doi:10.13433/j.cnki.1003-8728.2015.0826

假人脚部力学特性的试验研究

doi: 10.13433/j.cnki.1003-8728.2015.0826

1.
湖南大学汽车车身先进设计制造国家重点实验室, 长沙 410082

基金项目:

国家自然科学基金项目（51205118）与中国博士后科学基金项目（2014M552313）资助

详细信息

作者简介:
张恺（1989-），博士研究生，研究方向为汽车安全及损伤生物力学，zhangkai@hnu.edu.cn

通讯作者:
曹立波，教授，博士生导师

计量
- 文章访问数: 206
- HTML全文浏览量: 30
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2013-12-23
- 刊出日期: 2015-08-05

Experimental Study on Mechanical Characteristics of Dummy Foot

1.
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Changsha 410082, China

摘要

摘要: 汽车碰撞试验假人的脚部压缩试验是检验假人生物拟合性是否完好必不可少的试验之一，根据假人脚部标定试验法规要求，设计、制造了假人脚部压缩试验机，试制了4种弹性泡沫材料的不同厚度的脚垫样板，并进行了压缩试验，分析了样板厚度、密度以及硬度对试验结果的影响，得到了载荷-压缩量曲线随样板厚度、硬度变化的一般规律。研究结果表明：当脚垫材料的厚度为6 mm、7 mm以及C型邵氏硬度的大致范围为10~20时，假人的生物拟合性较好。
- 假人 /
- 试验机 /
- 标定试验 /
- 仿生材料
Abstract: In order to ensure the biofidelity of a vehicle crash test dummy, it is essential to conduct a foot compression test. A compression testing machine was designed and manufactured based on the calibration test regulations for dummy foot. Four different elastic foam materials of heel pads with several thicknesses were made. Foot compression tests for these samples were performed. The influence of thickness, density and hardness of the sample on the mechanical responses was analyzed based on the test results. A general rule of stiffness curve changing with the thickness and hardness of the samples was obtained. The research results shows that a 6 mm or 7 mm heel pad foam sample with 10~20 Shore hardness (type C) is appropriate to ensure its biofidelity.
- biomimetic materials /
- calibration /
- calibration test /
- crashworthiness

HTML全文

参考文献(15)

[1]	Foster J, Kortge J, Wolanin M. Hybrid Ⅲ -a biomechanically-based crash test dummy[R]. Hybrid Ⅲ: The First Human-Like Crash Test Dummy 770938, 1994
[2]	Wood G W, Panzer M B, Bass C R, et al. Viscoelastic properties of hybrid Ⅲ head skin[J]. SAE International Journal of Materials & Manufacturing, 2010,3(1):186-193
[3]	刘栋.汽车正面碰撞试验用假人标定系统的研究[D].成都:四川大学,2004 Liu D. Research of the automobile obverse impacting dummy calibration system[D]. Chengdu: Sichuan University (in Chinese)
[4]	张金换,杜汇良,马春生,等.汽车碰撞安全性设计[M].北京:清华大学出版社,2010 Zhang J H, Du H L, Ma C S, et al. Automotive design for crash safety[M]. Beijing: Tsinghua University Press, 2010 (in Chinese)
[5]	Humanetics Innovative Solutions. Hybrid Ⅲ 50 th Male 78051-218X User Manual[R]. USA, 2011
[6]	王凯,李向荣,朱海涛,等.HybridⅢ50百分位假人胸部低速撞击标定研究[J].汽车工程,2009,31(12):1123-1125 Wang K, Li X R, Zhu H T, et al. A research on the calibration of low speed impact on the thorax of Hybrid Ⅲ 50th percentile dummy[J]. Automotive Engineering, 2009,31(12):1123-1125 (in Chinese)
[7]	许述财,杨欣,赖兴华,等.假人颈部标定试验台设计与验证[J].清华大学学报,2013,(2):174-178 Xu S C, Yang X, Lai X H, et al. Design and validation of a dummy neck pendulum test fixture[J]. Journal of Tsinghua University, 2013,(2):174-178 (in Chinese)
[8]	任建英,朱政.汽车正碰试验假人头部与颈部标定试验研究[J].机械设计与制造,2009,(7) Ren J Y, Zhu Z. Test research on head and neck calibration of the dummies used in vehicle frontal crash test[J]. Machinery Design and Manufacture, 2009,(7) (in Chinese)
[9]	Watters V L, Jenkins J D, Below J D, et al. Hybrid Ⅲ 5th female neck test rotation measurement[J]. SAE Transactions, 2005,114(6):170-192
[10]	黄存军,黄世霖,杜汇良.汽车前撞事故中前排乘员下肢防护[J].清华大学学报,2001,41(8) Huang C J, Huang S L, Du H L. Protection of occupant lower extremities during vehicle frontal impact[J]. Journal of Tsinghua University, 2001,41(8) (in Chinese)
[11]	Masson C, Thollon L, Cesari D, et al. Effects of static high compression on human foot-ankle: biomechanical response and injuries[J]. Surgical and Radiologic Anatomy, 2006,28(1):46-53
[12]	Humanetics Innovative Solutions. Hybrid Ⅲ 50th Male 78051-218H Brand Harmonized Parts Catalog[R]. USA, 2011
[13]	Miller-Young J E, Duncan N A, Baroud G. Material properties of the human calcaneal fat pad in compression: experiment and theory[J]. Journal of biomechanics, 2002,35(12):1523-1531
[14]	张少实,庄茁.复合材料与粘弹性力学[M].北京:机械工业出版社,2005 Zhang S S, Zhuang Z. The composite material and the viscoelastic mechanics[M]. Beijing: China Machine Press, 2005 (in Chinese)
[15]	Croop B, Lobo H, DatapointLabs N Y. Selecting material models for the simulation of foams in LS-DYNA[C]//Proceedings of 7th European LS-DYNA Conference, Salzburg, 2009